Show off your setup or get inspired by others
Recently active
I am remodeling a back patio and installing 4 ceiling speakers and a TV. With the sonos amp will I be able to stream music to the ceiling speakers and have the TV on minus audio through the tv? How easy is it to switch back to TV audio through the ceiling speakers? Thanks for the help.
Can the Ray be stereo paired with another Sonos speaker (ie a Move)?
I just updated the Microsoft Windows SONOS S2 V14.8 app to V14.10. When I open the app it has “The Queue is empty” with a spinning globe above it. The Help About screen is blank. The update installed without reporting any issues. Has anyone else experienced this issue? UPDATE:I disabled my Norton 360 Smart Firewall. I then launched the S2 SONOS app. The app responds immediately without the empty queue message. The app Help about reports all information. I then closed the SONOS app. I enabled the Norton 360 Smart Firewall. Launched the SONOS V2 app and everything is now working.
We have been using the Arc in surround setup for quite a long while, but recently we have been experiencing problems that it echo’s at times. It is very sporadic. But the two back speakers (Ones) are slightly out of sync. It always happens when watching TV, but today for the first time also happened playing music.The solution for it is to basically to turn the arc off and on (i.e. pull the power and reconnect it). Then it all works perfectly again… sometimes for a few weeks, sometimes for a few days.The Arc itself is connected wired and the two Ones and the Sub are connected through Wifi. We have a Boost.Anyone have any experience with this and perhaps know a solution? I’ve not changes any settings. I’ve played with the lip sych setting when it happens, but that seems unrelated.
We’ve purchased the Sonos architectural in ceiling speakers and amp. Is it possible to place the amp inside a cabinet with correct wiring obviously? Wondering if this will affect performance or temperature.Thanks in advance for the advice.
Hey GuysDo you know if is possible to have in my living room a 5.2 setup? arc doing center Chanel and atmos2 Sonos 5 - Front left and Front right2 Ones SL - Surrounds And 2 subs Thanks guys
Hello everyone, I plan setting up 5.1 with 1 arc, 1amp with 4 passive speakers “2 fronts and 2 backs”, and 1 sub. Is it possible to do this set up?
How to play sound from Samsung phone (e.g. YouTube app or Netflix app) on Sonos Ray?
Hello all, my Playbar (and system) on S1 is still going great. We mainly stream Netflix etc over in built TV or Nvidia Shield Pro (even YouTube in 5.1).There's a few films I'd like to own in 4k and this comes with the DTS conundrum so for me a Blueray player that downmixes to 5.1 is acceptable.So that brings me to the Samsung M9500. Anyone on here still use one and is it.a decent player?, they goo for a big premium ove the K8500 (still UHD).Thanks for any comments.
If I search for music on Spotify, not through Sonos, I have many options of songs and music I don’t get when I search using same names but using Spotify in Sonos.
I know this question has been asked before but there doesn't seem to be a fix and it's the one major issue that will make me return the Sonos Amp. I'm using Google pixel 3a with android 12 and can't get the volume controls to work when the screen is locked. Tried everything the articles suggested.Not sure if it's an android issue or Sonos but Sonos should consider adding small remotes for volume and play/pause. Can be a wifi remote not IR necessary so no need for added complexities and components. This will reduce dependence on iOS and Android.
Hello. I placed an order June 6 for a Move in white. The order status still shows preparing to ship with no backorder date. What is the current expected delivery time? Thanks.
Looks like you can have more than 500 deezer playlists on Sonos now. True?
Sonos wake up alarm no longer plays radio station. Deleted alarm. Reset alarm. St to NPR. Still plays chimes!
More random software issues…. I have had a Move for 2 days. First day it was fine, added to my network, etc worked great.Today I moved it outside with me (well within wifi range, the router is just on the other side of a window) and it worked fine until I pressed Pause and went away for a few hours.Now I cannot get it to work at all. The Sonos app shows its connected and playing music but no sound comes out.I’ve got a solid white light and if press Play on the Move itself, it blink white for a bit and then back to solid white, still without any music.What do I do?
Hi Alli have a Samsung Q9 (2019) connected via HDMI to my Beam 2. This set up has worked previously and only recently stopped working. I made no changes to the settings and the Samsung Q9 is on the latest firmware (version 1325). Anynet+ is activated. My Sonos app indicates that there is Sound transmitted to the Beam2 but no sound is heard despite repeated efforts to increase/decrease the volume. I have unplugged the Beam 2 and Samsung TV and removed and replaced the HDMI to no avail. I have not taken the Samsung TV back to factory defaults yet. Any suggestions ?
I pre-ordered the Sonos Ray on June 3rd. I received the wall mount but the order for the Ray still states it's pending since the June 7 release date. I contacted Sonos.. the rep said I should have it by July 8 due to the volume of orders. Is anyone having the same issue?
My guess is no, but the Sonos support article is not clear.At https://support.sonos.com/s/article/3222?language=en_US, it says: “Trueplay tuning is supported by all Sonos products except Port, Connect, and Roam SL.”The article also specifically mentions Amp and Connect:Amp as specifically supporting TruePlay (under certain conditions).I kind of doubt the ZP80 and ZP100 have any magical TruePlay powers that their later iterations don't. The possibilities seem to be:ZP80 and ZP100 do not support TruePlay at all. ZP100 supports TruePlay in the same specific configurations that Amp and Connect:Amp do. ZP80, like Connect and Port, does not support TruePlay. ZP80 and ZP100 do, in fact, support TruePlay, without qualifications. (Seems very unlikely, but it’s what the language of the article implies.)(The article also does not make clear whether TruePlay is supported by both generations of Connect:Amp, or only Gen 2, another issue it would be nice to have clarity regarding.)Can anyone shed any
Hi, I have a play:5 in the kitchen, a IKEA Symphonic in the hallway and one in the bedroom.In the living room I have a surround system with a Arc and 2 One SL.When I play music, it seems like I cannot use the surround system speaker (arc + 2 One)..Is that by default, just as they show up in a group as TV?Really sad if I cannot use the One speakers when playing music..
Hello Community. I need some help with what is hopefully a basic situation, but has confounded me for the past few weeks despite multiple searches and deep contemplation. I’m seeking know-how for the best way to connect an Apple TV 4K, a Samsung Frame TV 2022, a Sonos Amp wired to two in-ceiling speakers, and wirelessly connected to a Sonos Sub. Currently the Apple TV is connected to the Samsung One Connect Box via HDMI. Do I now need to connect the One Connect Box to the Sonos Amp? And if so, with what type of cable? I purchased a Sonos Optical Audio to HDMI adapter - is that what I use to connect the Box to the Amp, and then tune some settings in the Apple TV and/or the Frame TV? Thank you in advance for the help with this fun project!
SORRY - FOUND MY WAY TO THE RIGHT BROWSE AREA. But still haven’t found a way to search. I used to be able to search for radio stations on TuneIn in Sonos. Haven’t used it for a while; now, there is no search bar. There are only different categories to browse, but they do not have all the TuneIn stations. I have Franceinfo in my favorite radio stations, but it is not to be found in any of the browse sections. If I removed, I wouldn’t be able to get it back. What gives?
Hi there, I recently purchased a Sonos One for my girlfriend as she had a rubbish TV (without Bluetooth) and terrible sound. however, it is not working well as a solution as I have to connect the sonos to the Apple TV via BT, and it is not a permanent connection, meaning that I have to select it as the audio source on the Apple TV everytime and controlling the volume with the ATV remote only works once the airplay connection is established. how can I get a permanent/seemless experience without having to buy her a BT tv?
Hello everyone, so I have a question, we have Sonos amps setup around our house, and we recently got an Orbi mesh system to put throughout our house, and I’m wondering if there’s anyway I can setup the amps to work on the new network while still being able to do it via Ethernet instead of Wi-Fi, it’s currently setup to work via Ethernet but it only works when I’m connected to my main Wi-Fi, I was wondering if there way anyway i would be able to forward them or something, the Sonos amps are plugged into a switch and the switch is plugged into the main router
I have a Tivo bolt, and LG TV, and the Sonos arc. In my old setup, I ran the HDMI cord from the bolt to the HDMI port 1 and then use an audio cord to run from the TV to my sound bar. How do you set it up with the arc? If I run the arc to HDMI port 2, it won't play the sound coming out of the tivo port. There doesn't appear to be a place for one of the optical audio cords…Thanks!
Please add an optional compact view for the music services page. The page listing tracks from a service wastes so much space. The excessive padding is good for touch, but you can only see a small number of tracks before scrolling. Consider a very dense list as an optional view. Scrolling around looking for a track is not a good experience.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.