Show off your setup or get inspired by others
Recently active
I am interested in purchasing a turntable. I currently have a sonos sound system. What is required with a sonos turntable? Does it connect via wi-fi?
We are installing a Maior Flip 900 motorised TV Mount for a Samsung 65” OLED TV. This mount allows TV to be tilted 90 degrees and then lowered down. We are wanting install a Sonos Arc which will be used for both TV use and also with Spotify for normal music use. Can we mount the Arc remotely on a high wall between ceiling and top of windows (approximately 3-4 feet behind tv) where we have an 8” gap on wall?Alternatively would could we mount to bottom of TV, but this will mean that when TV is in retracted position the Arc speaker would be face down towards floor.Any recommendations would be appreciated.ThanksPaul
Anyone recommend me that will i have to buy this product from the given product: It has the following features:Maximum Output Power 5 Watts Voltage 110 Volts Batteries 1 Lithium Polymer Battery Average Life 8 Hours Hardware Interface 3.5mm Audio Dimensions 5.59 x 12.7 x 13.21 cm Weight 544 g
Here we are years into this issue and on the most recent iPhone, with the most recent iOS update and the most recent Sonos app it still doesn’t show in the iOS Lock Screen?No Airplay connected, nothing has the controls, no AirPods it’s just one room with one Sonos product and one iPhone. And still no Lock Screen.
I have a client that wants to integrate a sub woofer into their living room joinery, the Sonos sub will not fit. We are setting up an Arc for the front and an Amp to run the rear in ceiling speakers. Can I use the sub woofer output on the Amp to drive a non Sonos sub woofer that will fit into the joinery or can I use a seperate Amp to drive the non Sonos sub woofer?
My playbar has just stopped responding to the Apple remote signal. The playbar IR sensor lights are not flicking on when the remote is used. The remote batteries are fine and the apple TV can be controlled.The playbar is connected to the TV via fibre audio cable.Again, the remote was controlling the playbar volume and just stopped working.If I try to setup a new remote to the playbar, the playbar does not register the IR signal.Hoping this is an easy fix and the IR debauchery on the playbar hasn't just stopped working.
HiI have just been reading the Sonos page about reducing wireless interference and came across the bit about reducing interference from other devices that use WiFi.It mentions moving Sonos speakers away from ‘other wireless audio systems’. Does this mean another Sonos speaker? For example, if I have one of my speakers very near to another (which don’t typically play the same music at the same time), could this be an issue with drop outs?I only ask as I have one of my One SL surrounds very near to one of my stereo Fives in my lounge and I have actually been having the occasional drop out from both speakers when either having the TV on, or playing the Fives in stereo.Note - all my non portable speakers use SonosNet via a Boost.
I'm thinking of getting a Sonos Beam gen 2 soundbar but because of the specs the bar is too high and covers the IR receiver on my 2021 Sony TV X90J. Does anyone know any solution? Thanks.
Hi I have an outdoor tv I have hooked up with the beam, and have had two play 1s as surrounds. However the surrounds were so far and didn’t play mono so they did no good for watching tv. So I recently switched and got an amp and the sonance outdoor speakers to pair with the beam to play mono through all for tv audio, but I can’t seem to figure out how to do that. I can again only get them to play as stereo surrounds which would be a very expensive mistake I made trying to switch over. Help please.
Have beam connected to LG tv through arc.we’ll be watching tv and sound is coming through beam and will just randomly switch sound to TV without warning. The volume drops down, so we have to turn it up, and then it’ll eventually just switch back to the beam and become really loud.have tried multiple cables and only conclusion is tv or the beam. Anyone else had this issue?
With SmartThings Legacy Platform being discontinued at the end of Sept 2022. Will Sonos devices continue to work within the SmartThings setup ?
Recently I've found myself using Bluetooth speakers and more especially Bluetooth headphones to listen to a variety of media sources (particularly Audible). A relatively simple and flexible process where I can listen on a headset without inflicting the sound on others.Achieving this for Sonos requires an expensive Amp or Connect plus a Bluetooth transmitter - crazy. I guess this rather cumbersome setup could be avoided with the advent of Sonos headphones, but probably only at some exorbitant cost. Once upon a time, I probably would have stumped up the necessary cash, but if any headphones work only exclusively with Sonos and can't also be used as normal bt headphones, then I'll pass.
Hi, I have a few Sonos Ports to control in ceiling speakers in different parts of the house. Right now I have a few small amps but would like to consolidate that into one multi zone amp that can control 4 different inputs and outputs independently. Any recommendations on an amp?
Hey all. We dropped our Sonos Move from counter height onto a concrete floor. No cosmetic damage but unsurprisingly, it now sounds terrible. Does anyone have an idea where I can send it for repair or am I better off buying a new one? Thanks
According to the verge, they claim Sonos is working on a set of new speakers and they look like they are designed to play audio in multiple directions including up for atmos.The Optimo 2 looks like the flagship, a replacement for a Sonos Five, it's big and has drivers for audio in all directions. Then there is a smaller speaker, the Optimo 1 and Optimo 1 SL, these could be designed as smaller home theatre and portable music speakers but with height channels. The new speakers appears have way more RAM and memory than previous models, perhaps indicating Sonos big plans for its new products https://www.theverge.com/2022/8/24/23319989/sonos-optimo-speaker-features-design
I need to control various Sonos sites from my IOS device. Works fine until I leave site; using VPN to remote into the site via cellular doesn’t work. IOS app binds only to Wi-Fi adapter on IOS and doesn’t recognise that I’m routing via the network that Sonos is on. Anyone found a solution?
Hello Sonos community, I would like to connect my video projector to a Sonos device, the Sono Beam Gen 2 seems most appropriate with the HDMI. Anyone already tried ? If not, do you recommend another product? Thank you for your reply and help ;)
I am going to set up a secondary multi room system using Sonos One SL in 3 or 4 rooms. My main system is a Lyngdorf system which is not multi room. I need to decide whether to buy new Sonos One SL’s or for half the price I could buy secondhand Sonos One (Gen 1). What are the main differences between them ? It is possible that one of the SL’s could be replaced by a Sonos Five so the same question about Five / Play 5 Thanks
bonjourj'ai deja une sonos play 5 et un sub (comme chaine ds mon salon) , peut-on associer la barre de son ray avec le sub (que j'ai deja) d'un coté et garder mon association play 5 sub d'un autre en utilisant jamais biensur les 2 associations en meme temps car soit je mets la musique ou la tv et aussi sans à avoir changer les paramètres selon ce qu'on écoute merci pour votre réponse
I have several Sonos speakers. I want to reduce the volume of just one speaker. How can is this best done?What I do at the moment on my Andorid app is this:(1) First tap the volume dot for the whole system. This shows the volume settings for each speaker. I often play at a low volume, such as setting number “9” which means there isn’t enough space on the slider to tap to the left of the volume indicator dot.(2) Next I tap to the right of the dot (which increases the volume) and then use the smartphone’s volume control buttons to lower that particular slider’s setting to.That’s a very clumsy way of doing it. Is there a simpler and better way?
Hi, I wired my new build for ceiling speakers. I’ve got 2 sonance in prime position for Atmos surround. The problem is that I don’t know which wire goes to which speaker when plugging them into the Amp. Is there a way to test it? It seems that 1 of them is unresponsive and can’t tell if it’s a wiring issue or Amp issue,
I have a Connect Gen 2 manufactured in 2018. Is the sample rate for the analog to digital conversion on the line in 44.1khz? or 48khz? Is it the same for the Sonos Port?For example if I plugged in a DVD player and the audio output was 16bit 48Khz, would the Connect down sample to 44.1khz?
Sonos Feature Requests + Product Ideas Summary:Products with HDMI input Sonos Three Bathroom speaker Sonos headphones Mini Sonos Sub Centre channel Installer app ----------------------------------------------------------------------------------------------------------------------- (1)If you own a Sonos TV component such as the Beam, Arc or Amp you’ll be familiar with the following screensaver or similar: ARC backdropThese components have the capabilities to output video (usually to show that they're connected). Sonos should release an update that allows users to display ‘Currently Playing’ music like the image below: Depending on the products processor and video output chip, at a later date Sonos could introduce Google Cast and Apple Airplay (Video) capabilities. (2) Sonos Three (at £299): successor to the Play:3. Just do it, we need it. Better sound than a One but not as expensive or big as a Five!(3) Bathroom speaker: A waterproof, active, dual tweeter speaker (with small Sonos amp b
My main system is in my living room and is not a multi room system and I now want a multi room system for 3 rooms in the rest of the house. I am thinking of buying three One SL’s but need to understand if they will do all I want. I have a subscription to Qobuz and a sizeable collection of flac tracks on my PC and want to be able to access these. I also want to be able to play podcasts from my IPad and also listen to radio stations. I want to create playlists which can be accessed by any speaker I want to be able to play something different through each speaker at the same time. Will 3 One SL’s be able to do this or will I need to buy a Port as well
Hi all. I ran a S2 Sonosnet-based system in our home for some years with a Boost connected to ethernet on the middle floor of the house. All devices played smoothly and the matrix looked good.A pair of Moves was then purchased for garden use. They set up fine as a Stereo Pair and connected etc... indeed, all seemed well.However once out in the garden the Move unit which was furthest from the house experienced drop outs, freezes and general buggyness. I tried various things with wi-fi boosters and changing the wireless channel etc but to no avail.Finally I reset the entire system and started again, this time omitting the Boost and running the whole thing as a wi-fi setup. Success! - all configured fine and now the stereo pair of Moves in the garden run without issue and I can take them further from the house than before.So my question is this: because the Move relies on wi-fi and not Sonosnest, is it better to use a pure wifi setup for reliable Move performance, rather than one where th
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.