Spaces & Setups

I am in the process of moving into a new home that needs to be wired with a whole house speaker system. There will not be the opportunity to install volume controls in each room.I would like to use my Denon Receiver that has two zones for Multi-Sourcing to other amps with RCA cable to split the signal and power 12 pairs of speakers I currently have in my home.My question is can the Sonos Amps connect to my receiver and daisy chain with other Sonos amps so one music source can feed all the Sonos amps in sync? My Denon receiver Is the main source for my home theater and multi-sourcing thru-out the house and in need to somehow control the volume with each set of speakers. Complicated question and I hope it makes sense.  

Hi, can you let me know the best recommended set up to connect an Arc with a PC for listening to video (no TV available unfortunately to connect HDMI-ARC cable) streamed through a PC - eg. SkyGo - I think there are various set ups, but want the best without delay on the video content. Thanks for your help

Hi, I need your help setting up my Beam gen 2. In the end I think my tv is to old (I hope I’m wrong).  LG OLED55C7V (launched 2017) Apple TV 4K (latest) Sonos beam gen 2 What I understand, my tv only have ARC port for hdmi and not eARC. When having the Apple TV set to Dolby Atmos, I can’t have the sound to be synced because I don’t have earc ports. So I tested Dolby digital 5.1. But then I can’t get the sound synced properly and it did also get a little pulsing sometimes.  Last try I set it to Stereo. Now the sound got synced. But the sound sometimes sound like it’s in a pipe / tube. Really weird.  Other settings on my Apple TV are: 4K SDRYCbCr4:4:4Match dynamic range and frame rate On my LG TV it’s set to: Bypass/pass throughDTV is set to autoSimplink onOutput PCM When turning Dolby Atmos off in Apple TV and let it use standard surround and also set the Output in LG to Auto instead of PCM. Now it sends Dolby Digital 5.1 and the weird “pipe”-sound is gone. But, the sound gets a little

There should be a further option in the ‘Queue Management’ dropdown; that is ‘Add To Front Of Queue’.Isn’t that how Sonos used to work?Correspondingly the user should be able to specify a default setting for this to avoid having to visit the dropdown at each visit.

Greetings from Rhode Island.My question is whtat hardware (and how many?) do I need to upgrade to the latest platform which i believe is Sonos 2.I have Sonos one hardware driving Sonos One Speakers. There are 8 outdoor speakers in four locations and 10 indoor speakers in 5 locations. I assume I can use the Sonos one speakers I have with the new Sonos 2 hardware. Many thanks for any insight. Paul

I recently installed the sonance 6.1 speaker system using 14-4 outdoor rated wire total length approx 200’ to last satellite speakerapp 140 feet from amp to sub woofer wired up everything correctly notice no bass from sub woofer went to EQ setting s on app adjusted bass treble loudness - still no bass from sub - I adjusted the L R balance bar a little bit then had bass from sub woofer - only get bass from subwoofer if the balance isn’t center - has to to off center to L or R to get bass - any idea - voltage drop ??please ring it thanks in advance 

After housing for a week or so when it worked fine,  some reason Sonos could not find 3/5 pieces of kit and says “this kit is part of another system, reset and add to new system” - a real pain to have to force the reset on each and add - using “Sonos network” when it asked.however for 1 piece, this doesn’t work - it says created temp Sonos network “ but my phone cannot find it to connect to. Have tried adding it to system via Ethernet network but when I try and access it it disappears from the system and needs readding - any suggestions ? 

So I have a arc ultra 2 era 100s and a mini sub as my living room set up. I just recently bought another mini sub and 2 era 300s. How do I connect all of them together to for one living room system using the 300s as the surrons and the 100s as a stero pair. Is this even possible. I can't seem to connet everything together.

I have set up a new Sonos system and I am connected to it. The problem is that I cannot add music services like Spotify and I cannot update my music library. I can pick Spotify to add then I click on “connect to Spotify” then when I click on “Authorize” nothing happens. I restarted everything. I changed my password all the things that are suggested then I called Sonos and they said that this was a known problem and their engineers are working on it. This pertains to the S one app.

Quando non si usa può  stare sulla base di ricarica o bisogna toglierlo? Moderator Note: Google Translate- When not in use, can it stay on the charging base or do you have to remove it?

(I may have originally put this question in the wrong place...so my apologies for the dup)Can i sync 3 wireless Sonos’s...with one in the front yard, back yard and inside?  If so, what do I need to do that and what would the least expensive wireless speaker/system solution? Thanks

Looking to purchase and install GARDEN SERIES SGS 8.1 OUTDOOR SYSTEM (8 - SATS, 1 - SUB).  I see that these systems include an optional SOnance Amp.  Would I need to purchase the Sonance Amp as well as the SONOS Amp, or will it work well connecting direct to the Sonos amp

I have a Sonos One and 2 old Sonos Play.The Sonos One is linked to Alexa with all relevant skills enabled.Apple music is logged in.Amazon Echo device in the kitchen will play Apple Music songs on voice command.Tthe Sonos one will play apple music from the Sonos app if I select it via the UI, but if I say “Alexa play music” - it says “Ok - here’s Apple Music” but nothing plays.  Same happens if I specify an artist or track.  It responds to other commands like “What is the time” or whatever no problem.I have tried all the obvious like rebooting everything, disable and reenable skills and settings in both Sonos and Alexa.One thing I noticed is that in the Alexa app on my phone, under the “Music and Podcasts” settings, the skills for Apple Music are listed under “Family” but if I click on my own name, the Apple music skill is shown as the default, but there is an orange/yellos triangle with an exclamation point to the levt of the “Your default services” - this excamation point doesn’t appe

I have an up to date Sonos system that is comprised of 2 Sonos One and 2 Sono One SL speakers.  I have an MP3 library on a networked Windows 10 laptop that uses MyMedia v.1.3.148.998 and the Alexa Mymedia skill enabled.  When I ask Alexa to tell my media to play any artist, the first song in the library plays and then repeats endlessly. If I say Alexa, “next” the next song plays and then repeats.If I try the same thing on my Amazon Echo devices, it works as intended, one song plays and then the next and the next.   Any help would be appreciated.

The S1 app (and older) had the option on Android to play music "On the device" and I can browse my local files and play them. it went away of course with the abomination that is the current app. Is this option ever going to added back into app? This is very useful when working on a space at my brother's farm that still only supports S1. However it would be nice to use it in other situations when connected to a system other than my own.

my mac blew up ...and i didnt want to do that platform anymore….so i bought a lenovo AIO 3all in one…….i have two sonos 5;s connected to a min sub woofer...i can get spotify to play by selecting in house ...and i can play my radio stations through the sonos app….but how do i get utube to play ...and dose a direct headphone jack from the 5.;s to the lenovo aio 3 ...a line in work ...with the single jack ensuring the two 5;s and the mini sub are grouped  

I just purchased 4 Sonos ERA1 and 1 ERA 300…I’m loving the experience. I would like to use them with my TV until I can squirrel away the funds to buy an Arc Ultra. Is the Line-In adapter the best way to achieving my goal? Thanks in advance.

When I play Apple Music through the Sonos iOS app using my Arc Ultra with Sub Gen 4 and Era 300 rears, playback is not gapless. On albums with seamless transitions between tracks, the Arc briefly cuts out during transitions — going completely silent until the next track starts. The music playback setting for the Era 300s are set to Full, and Spatial Audio is turned off. Has anyone else experienced this issue? Any ideas for a fix or workaround? Thanks in advance!

La bocina no se conecta a puntos de acceso inalámbrico de alta gama, en banda dual 2.4/5 Ghz y con clave WPA2/WPA3. Moderator Note: Google Translate- The speaker does not connect to high-end wireless access points, in dual band 2.4/5 Ghz and with WPA2/WPA3 key.

I have updated the Sonos app on Android which was mandatory and it looks like the EQ is now missing. How can I change the bass and treble settings or can I not do this? Thanks.

Grouped amps don't follow volume control with main amp

Buenos dias tengo una bocina Beam pero dejo de prender y ya hice todo lo que me decian y aun asi no prende que puedo hacer al respecto?

If one adds a track to an iTunes (‘Music’) playlist on a device running the Sonos App will it update a Sonos ‘Imported Playlist? 

Hi, can you help me?how to connect 2 roam 2 speakers via bluetooth?It could be even mono connection.

It was great to have a speaker without a mic