Skip to main content
Answered

Unable to connect to Wi-Fi

  • November 10, 2024
  • 4 replies
  • 118 views

Hello Sonos Support Team,

 

I’m experiencing an issue with connecting my Sonos device to Wi-Fi. Despite entering the correct Wi-Fi password, the device fails to connect under any circumstances. I’ve tried multiple times to ensure the password is correct, but the connection still does not establish.

 

Could you please assist me in troubleshooting this issue? Any advice on how to resolve this would be greatly appreciated.

 

Thank you for your help.

Best answer by Airgetlam

I would recommend that you submit a system diagnostic within 10 minutes of experiencing this problem, while the cable is plugged in, and call Sonos Support to discuss it.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the Support staff, they have tools at their disposal that will allow them to give you advice specific to your network and Sonos system.

View original
Did you find what you were looking for?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

4 replies

106rallye
Forum|alt.badge.img+18
  • 6152 replies
  • November 10, 2024

You could try temporarily disabling the 5Ghz network.


Airgetlam
  • 42663 replies
  • November 10, 2024

Unfortunately, this forum is for Sonos users, and not Sonos support directly, as they don’t frequent this area. At best, you may get a response from one of the (very few) moderators who work for Sonos, and a lot of good input from the community, such as the above. 

In some threads, it seems that people have force closed the Sonos controller, then reopened it, and been able to enter their WiFi password and get it accepted. I’d also try, if possible, temporarily connecting the speaker with an Ethernet cable to your router, until it gets set up, and then remove the cable. 


  • Lyricist I
  • 1 reply
  • November 13, 2024

I had to complete set up with Apple cellphone and Ethernet cable plugged into router.  After set-up was complete, I was able to see the System on my Android phone.  I still can’t figure out how to utilize without the Ethernet cable staying plugged in though.  Every time I unplug, I lose the system.


Airgetlam
  • 42663 replies
  • Answer
  • November 13, 2024

I would recommend that you submit a system diagnostic within 10 minutes of experiencing this problem, while the cable is plugged in, and call Sonos Support to discuss it.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the Support staff, they have tools at their disposal that will allow them to give you advice specific to your network and Sonos system.


Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings