Fix & Optimize

unable  finishing Trueplay procedure with 2 Play 5 Gen 2 in a large room

Got a playbar, resetIt cos I'm the new owner Now having trouble signing in as one

New. Adjusted. Updated. Compared to my Bose QC35 ll and Bose buds, sound disappointing. Fuzzy, compressed, poor base. Android phone. Sonos Arc.  

I’m having issues updating alarms in Sonos. I can open and delete and I can also create a new alarm as long as I don’t make any changes to it, but the moment I change the time, repeat and sound it doesn’t save.The app is up to date and I’ve tried restarting my phone, (Galaxy A40), resetting the app, reinstalling it and have also turned the speaker itself (Era 100) off but so far nothing has worked.If anyone could help I’d much appreciate it as I rely on these alarms to get ready for work in the morning and my starting hours can change on a weekly basis (hence why I need multiple).

Why does your system force all IOS users of your app to expose their exact GPS location to simply connect a speaker to a base station?  

Can you still use Trueplay, for room Acoustics on a playbar please, keeps coming up not compatible, I have lates app, iPad up to date etc 

Hi, I hope everyone is doing well.  I am enjoying my new Sonos home theater system   I have a Samsung flatscreen connected to my Apple TV. I have the HDMI going directly to the Samsung.  Is this the best way to set it up?  Or should I be connected directly to the Apple TV? I’ve noticed that most of the sound coming is Dolby digital        Thank you for your reply   

My question is in a title

Hello team,does anyone else find JioSaavn music service to be very temperamental?now when I click it it doesn’t show anything.ive gone to reauthorise but after logging into to JioSaavn and clicking “authorise” on the Sonos app, Sonos just hangs with a spinning circle.

Since the Sonos ecosystem has (or should I say had - read on...), for me, calmed down a lot recently I took the plunge to replace some of my older speakers with new. This ended up as a full Ultra/Era300/Sub4 surround setup and and Era100 pair. However on successfully introducing these to my system, which went very smoothly, I can not access my local music (NAS sourced) on any of the new speakers. All pre-existing speakers are fine. I have tried:Resetting a few of the new speakers and re-introducing Creating a new music folder in an existing share Creating a new music share Re-adding a removed & reset Play:1 to my system Splitting the surround system into component speakers  Multiple reboots of speakers and all network componentsThe speakers have all had last weeks firmware update and this did not address the problem. All speakers are on the same (unchanged) network. All are in the same positions the speakers they are replacing were and now some, for testing, are next to pre-existin

Is it possible to have 2 systems in two different rooms each with a Sonos Sub Mini working autonomously 

sonos s2 controller app on android and running Apple music app within S2 app.  Is  anyone  able to not have tracks drop and stop playing  with new Arc Ultra, Era's 2 era 300's,  and sub 4?  i cannot do.  If zi play just my old play 1 speakers there is no issue.  Al sound played from my TV only plays fine, no drops, that includes Amazon music, Spotify. zpandora.  Apple music is not availabe on Google TV as an app unfortunately.

I have a WMA album that I’m trying to play through the Astiga music service.When I play the album, the album loads into the play queue but then just skips through all the tracks.If I download the files, they have this information from ffmpeg:Input #0, asf, from '/tmp/test.wma': Metadata: WM/MediaPrimaryClassID: {D1607DBC-E323-4BE2-86A1-48A42A28441E} WMFSDKVersion : 11.0.6002.18049 WMFSDKNeeded : 0.0.0.0000 WM/ProviderStyle: Pop/Rock WM/EncodingTime : 1685772288 DeviceConformanceTemplate: L3 publisher : Chrysalis Records genre : Pop PeakValue : 32417 AverageLevel : 6779 track : 1 WM/Year : 1991 WM/UniqueFileIdentifier: AMGa_id=R 3428;AMGp_id=P 12509;AMGt_id=T 5062613 album : 30 Something album_artist : Carter the Unstoppable Sex Machine WM/Provider : AMG WM/ProviderRating: 7 IsVBR : 0 composer : Jim Bob title : Surfin' USM ar

HelloI have moved all of my iTunes music from my laptop to my network WD myCloud ultraBy doing this the the XML files addresses will now be incorrect for the songsI'm having trouble to figure out the XML addresses how they should be laid out for SonosThis is the address line within iTunes<string>file:///Users/markburton/Music/Music/Media.localized/Music/StoneBridge/Take%20Me%20Away%20-%20The%20Remixes/06%20Take%20Me%20Away%20(Stonebridge%20Radio%20Edit).mp/Users/markburton/Music/Music/Media.localized/Music/  This is my address pathway from WD mycloud ultra/MyCloudEX2Ultra._smb._tcp.local/Public/Shared Music/Music/Al Green How should the pathway read please?      

I am a happy user of an old Sonos Legacy system with the S1 app, an old Connect, a Play:1 and :3 (with proper buttons) and an OneSL because I couldn’t find a proper Play:1 anymore.Mostly, I've been using the system to listen to my local music library or Tidal, or stream a webradio station via the custom URI “hack” via tunein. I've seen that a lot of people have issues with that with the new app, with the S1 app, it still seemed to work fine.Until now.I had been away from home for a couple of weeks and when I came back, the custom radio doesn't work anymore. That is, in Sonos. It works in the TuneIn app, it works on the station’s website, the raw URI works fine from all sorts of streaming players.I tried to get Sonos to directly play the stream via the API (x-rincon-mp3radio), doesn’t work. Tried other streams - don't work. Normal, ad-infected TuneIn works. All my custom URIs stopped working.Via the support webinterface (:1400/status) of my Sonos hardware, I found out that a software/fi

Hi all,I'm Kamal Hinduja, based in Geneva, Switzerland(Swiss) .  can anyone explain how to fix Switching speakers disrupts TV playback? Thanks, RegardsKamal Hinduja Geneva, Switzerland 

Following a network change in my house, my entire Sonos system disconnected, and it is impossible for me to reconnect it.I tried everything, delete the system, recreate a new one, disconnect and even return to the old network but impossible. Each time, the application can no longer detect my system or at least connect. Because I have a message telling me that it has found a system on this network, but as soon as I click to connect the application tells me that it is connected to the system, but it never appears in the application. As if it had never happened?Could you help me please

hi all,i bought my Sonos ace a couple of weeks ago, and update with the new firmware.when i used it with my phone or laptop via bluetooth the sound is realy pretty good, but unfortunately via swap tv is realy "meh " ... even with true cinema enabled ... volume is too low at 60% ( wich is the base volume setting when you swap to the tv ) and i need to turn up the volume at 90% to ear something "acceptable" to my ears .. and no, i'm not deaf.i tried to reset my Ace twice and update also all my speakers system to the last firmware version ( beam gen1, sub gen3, 2x one SL ) and also my ace with the latest fiirmware but nothing changed. 😞 what should i do? 

For four years since I installed the Arc and Sub, I have controlled the volume of the Arc with the Cox remote control, and the volume of the TV speakers never changed, always muted. This morning the TV volume started changing when the remote was used to adjust the Arc (home theatre) volume. I have no idea what may have changed.Even more frustrating and confusing is the TV speakers do not always change. The volume changes sometimes, not every time.The ARC is connected to the TV via the ARC output.Any ideas?

Hi ! My soundbar made a quick repeatable sound and after a few seconds a very annoying and loud sound at about one second and till then I have no sound .i have a soundbar (arc ultra black), 2 Era 300, and a sub woofer . I have a 7.5.1 system !  do anybody knows what happened!  

Every time I connect my headphones via bluetooth for a call on Google Meet the mic either just doesn’t work or my input audio cuts in and out for the first 5 minutes of the call. All the output audio is fine. I’ve checked both the settings in Google Meet and the system settings and everything looks fine. When I connect via USB it works fine. It’s very frustrating. Any ideas? 

I have an install with a Samsung TV, Arc ultra, sonos amp with 2 ceiling mounted surround speakers. I can use the rear speakers when playing through the Sonos app but no sound from the rear with TV usage. I thought I would hear surround sound. Thoughts/help appreciated

Hey allheres the go, I’ve got a Ray, Sonos 1 and play 3 that are all connected to the same network and running fine.  The issue I have is that the Ray is plugged via optical cable into the tv and when watching the TV if you want to play music elsewhere in the house on the play1 or 3 when you open the app and change the speaker, the tv playback disconnects.  Note, I am not grouping speakers. I am trying to play music on another speaker while the tv sound is playing.  Any suggestions on how to change speakers without disturbing others? cheers 

Recently my Sonos system started having major issues (suspect from an EERO update) where the speakers were slow to start, then would cut out and music volume would go up and down.   EERO says to connect all wireless which was my setup, but I went ahead and turned on SonosNet, and all issues stopped.   So I’m not setup opposite contrary to EERO recommendations.  Does anyone have insight into this?  I tried questioning on the EERO site and only get the recommendation to turn off SonosNet.

I'm Prakash. I'm having some trouble adding or removing a specific music service, like Apple Music, from my Sonos account. I've been trying to do it through the app, but it's not working as smoothly. Please share your ideas or suggestion with me. RegardsPrakash, Switzerland (Swiss) Moderator edit: removed full name and other unneeded details.