Fix & Optimize

Hello, I own 2 Play 1, a Beam and a sub. I would lire to buy a  vinyl turtable Pro-Ject T1 with an Era 100. Could I  built a multi room via WiFi with all of them ? thanks Pascal

How to enable Bluetooth on the Sonos move speaker

I have several Sonos devices around my house, all already grouped by area, my problem is that in the Sonos app I select a different volume in each area according to the volume I want in each area and it looks good, when it comes to uploading the volume with the “general” volume, the app does not move the rooms symmetrically, it changes the volumes of the rooms and that causes the volumes to change differently in each room and it already sounds louder or weaker than the “balance” that I give it had givenThe same thing happens to me if I do it from my IOS phoneDoes anyone know how to solve it?thank you

This is terrible. It’s already November and basically I have 27 speakers that are barely worth their weight.  The volume is completely unresponsive. It can take up to 30 seconds for it to change if at all. If you can’t change the volume to your music, what is the purpose of this entire set up? This is the most basic functionality.Music shown as now playing is often wrong and it takes about 30 seconds or so before the current song information is displayed in the app   Speakers take about 30 seconds or more to group together drop in and out. It is horrible. When displaying a playlist and touch the first item in the list that item does not play. It seems to pick some random song it decides to play. I have no control over it. I had none of these problems prior to this app update at the first quarter of the year and it is baffling as to why this is not fixed yet   Is there any hope out there or does anyone have any information on what to do to straighten this out? I considered removing ever

After numerous updates and apologies it is still clumsy to use. The response delay is appalling. Quite often I have to reboot the app for a response. Is this as good its going to get? I can't believe I've just upgraded my system with 3 new 2nd generation speakers on the back of empty promises. 

When I open my Sonos App on my Android Phone many of the tiles do not form correctly. It can take several minutes for them to form. Sometimes they form but when you press them the App changes to a screen "System not Connected". When the App is reset it finds the system again. Then when the tile is pressed I get the message "Something went Wrong". It often takes a couple.od.attempts to make it work. This was working a few months ago but is getting worst with time. I have rebooted my router and restarted the connected Sonos devices.  

I have tried the suggested workarounds to add my LaCie external drive (contains my music library) as a networked device, but I cannot get it to work on my MAC desktop. Has Sonos provided a release date when this error will be fixed? Thank you.

Hi there, When searching on Sonos app for YouTube music playlist/artist or songs then selecting YouTube Music to view more search results, the app crashes.  This happens on iOS 16.1.1. and iPadOS 15.6.1. I have tried another iOS device running same versions as above with same results.  I’m using Sonos 14.20 anyone else experiencing the same?

I’m having a really tough time with the Sonos Arc Ultra paired with g2 sub and 2x 300s. The atmos bubble is enveloping but the dialogue coming from the center channel is too soft compared to the rest of the mix. I’ve used true play multiple times. Even when there aren’t big surround moments playing, the center channel just sounds soft and tinny compared to the original arc. It’s terrible. What can I do?

Yesterday I was suddenly unable to play my music as seemingly could not be found. The only thing that has happened is for first time I allowed Onedrive to sync all my laptop files, and now I cannot see them on my C drive, just Onedrive. However, my C Drive seems still very full as though all my files are still there but I (and SONOS) cannot see them. I am at a loss as I’m not that technical.  Thanks for any help with thisBrian

Initially I had the battery % showing on the app for my Move 2 but seems to have disappeared whether on WiFi or Bluetooth. I thought Sonos had fixed this glitch?!

My Connect is never in sync with my other Sonos speakers. I’m going straight into an amp, so it’s not AVR latency… Is this inherent with the connect?

I have 2 sonos one sl gen 2 as surround speakers paired with a beam 2. The surround speakers keep stuttering and cutting out

I have an arc, sub 3, amp and 2 surround speakers.  All of a sudden my surround speakers are playing all audio, like the arc.  How can I change this?  

Hey!Used to be able to link both One and Roam (in different rooms). All I get now is an error message. What's the dealio?"Unable to connect. Try again later"I did.It didn't.Reconnected both to the network. Updated all updates! Pressed the 'play' button to link the 'off' one to the 'on' one - no joy. Any off you Sonos heads out there got an answer? Be a shame to bin 'em off as they're cool bits of kit. Thanks! 

I have a new broadband hub and am not able to get my Move to work. I’ve tried the set up process. Sometimes the Move is recognised, sometimes not. I’ve entered the hub password and been told the Move is connected. It doesn’t work. I’ve tried Sonos support to no avail. One screen I opened stated that Sonos works on 2.4Ghz, my hub is 5Ghz. Is this the problem? The screen suggested splitting the hub??? No idea what this means. Any ideas anyone?

The sound quality on my Playbar has recently become distorted while playing audio from my televison, a sony KD-55X85J running android TV.The EQ is really off, little to no mids with overly sharp highs and muddy lows. The issue only exists when playing audio from my tv which is connected through optical and persists whether using an inbuilt app or a separate media box hooked up with HDMI to the tv.the sound quality is fine when playing my music library through the app. playing a number of songs though both the tv and directly through the app, they definitely sound very different.Been spending a few evenings playing in the settings to no avail.So far I’ve tried:changing eq settings of the Playbar: changing the settings no longer seems to do anything at all.changing eq settings of the tv: no dice, the settings don’t seem to exist when when outputting through optical.changing audio output signal on tv: no change, but if I set it to PCM then I get no audio at all.power cycling the Playbar,

My home came with 3 Sonos Amps in a tech closet and 3 sets of speakers (Kitchen, Patio, and Finished Basement).  All of the speakers are in the ceiling and I can stream to them using an App on my iPhone.I just hung a Sony TV (Google O/S) in my finished basement.  Is there a way to send the audio from the TV to the ceiling speakers in the basement?  I can’t run any kind of wire from the TV to the Amps as they are through several walls and 40ish feet away, Thank you. 

I have always the green led Light Burkina, how can i get this fixed?

I have removed sonos app, siriusxm app, removed siriusxm from sonos app and added it back as well as rebooted router and still get ‘something went wrong’ when trying to play anything from siriusxm. streaming works in siriusxm app. 

Why in the world was volume control removed from the iphone app????  This is very frustrating.

The App Volume menu closes within seconds  of opening.  Is there a way to keep the menu open for more than 3 seconds before making a choice?  it constantly closes as I am looking at the different volumes - very frustrating to keep reopening  it appears the only menu with a rapid/ quick dwell time - others remain open until closed 

Hi  I have a Beam Gen 2 and today I purchased a Pair of ERA 100,s however I’m have trouble making them All connect together….  I have the Sonos app and it shows the ERA 100,s and the Beam Gen 2 but they won’t seem to connect to each other. Am I doing something wrong 

My sonos connect amp with serial number: 1508-B8-E9 etc… is not being detected by the application.I havent used for a few years - is there a software application that can be used?

Hi all,I have a Sonos Arc in a surround setup with two Era 300’s and a Sub. I bought a Sonos Port to connect my turntable with build in amplifier to the setup but I can’t make it to work. When I try selecting the Arc to play it says “Unable to connect. Try again later.”Has anyone else had this problem and if so, do you know how to fix it?