Recently active topics

Just received the Sonos “Immersive Set with Beam” couldn’t wait to get it up and running. I’m in my 70s so please reply slowly…. Over the years I’ve had several systems that always allowed me to set a baseline volume level for each speaker in a surround sound configuration. I spent about 4 hours this afternoon on the Sonos App and no such luck.  I remember reading a blog about placing each ERA100 in its own room and going that route, with that, I was able to set the volume of each speaker but not able to save it when done.  Was hoping for the ability to save those settings that would stay proportional increased or decreased the grouping volume.  I though perhaps the “Zone” function would do that but didn’t have any luck.  Any help would be appreciated.

Hi all,I’m helping my friends get their Sonos system setup.  They have an Arc Ultra and Sub 4 hooked up to their TV, two Era 100s in a separate room, and a Move.  Ideally, when they listen to music, they would like for it to play through all of the speakers, but when they watch TV, that would exclusively play through the Arc Ultra and Sub 4. Of course, they could manually add and remove speakers through the app depending on what they’re listening to, but that would be annoying to do that multiple times a day. It seems like there must be a way to set it so that the default for playback from the TV is through the Arc Ultra, and the default for listening to music is through all of the speakers, but I cannot figure out how to make that happen. thanks!Ben

Hi there, just hoping to give this a bump since it has been a few months without an update to the app that might resolve this. Here is the relevant post in pour previous thread (unfortunately closed for inactivity): As of today we are still seeing a ?? for the CFBundleShortVersionString with the latest version as available via https://www.sonos.com/redir/controller_software_mac (“Sonos_57.22-67080.dmg”):Latets Sonos S1 App showing ?? for Version string  

I invested heavily in SONOS-  many years ago- 15  Pay 5’s,    8 Play 3’s,   several sub woofers - 2 soundbars.  several connects, sonos play 1s - I basically maxed out the system      Over the years- speaker die or go bad- but SONOS no longer makes anything compatible with my gen 1 set up- so they lost me-  It would be a fortune to replace all the hardware I own- and some is installed in my ceiling so that is also expensiveSONOS should have continue to make speakers that work in gen 1 systems 

Hi!  Does anyone know if Sonos will ever implement the ability to save volume settings? I balance out speakers throughout the house and then someone uses it making all speakers the same level.   Additionally, the ability to have custom presets for the volume would be ideal - Dance Party, Background music, etc., where there are different expectations and volume balance between each speaker and room.  This would be easy enough to implement even if it’s a locally stored settings file.  Oldest post I found bout this is seven years old, and there are hundreds of others, so clearly not a priority even though it’s a whole home system. Thoughts?

This could not be a simpler scenario that I’ve ran into massive problems trying to solve. I have a Sonos Move (gen 1) pair set up on my home wireless. Everything works great.I want to connect that pair to a new network. Both wireless networks are active, so I want to temporarily switch them. I want to “tell” the two moves to reconnect to the new network. I want to do this without factory resetting the two Moves.I have my phone and it’s connected to my new network. What do I do?

Hie everyoneI have a TV samsung, no 3.5 jack nor Bluethoot, it has HDMI arc and Optical audio, I have Era 300, I tried an adapter USCB-C to HDMI, it does not works, any idea how to sent audio from TV to Era 300?

Peut-on utiliser le sonos Era 300 uniquement en Bluetooth si le wifi de ma box internet est en panne?puis-je l’utiliser en Bluetooth si je la place chez un ami, pour la soirée ?

Hi the problem I have is what is in the title, when I stream music directly to Sonos Arc I can control the volume using the TV remote, but only if the TV is off, if the TV is on but the source is still set to a streaming service or AirPlay the TV remote is not able to change the volume. I have an LG G1 and use the magic remote.

Can you control sonos from more than one phone?

When I look at the albums now in my library and the album has multiple artists it is split into many entries in the display. Effectively making the album view useless at it is not possible to play one album with multiple artists (and it it not reasonable to try and make hundreds of play lists one for each album manually).This is not how the album view worked in the old app :(

I have recently switched from Amazon Music to Tidal. I have linked the Tidal service in the Sonos app and can control using the Sonos app, I just can’t get Sonos to play Tidal music using voice commands (Sonos), I get the following back:“Sorry, Sonos voice control isn’t available for Tidal yet”.Can anyone help, or is just a limitation I have to live with?ThanksLee

my Sonos has become so glitchy. It is almost unusable. It goes in and out all the time. Sometimes I get three songs in a row with no problem sometimes I can’t get one song in a row with no problems sometimes certain connect amps sync up sometimes times they don’t I’ve reset routers. I’ve unplugged all the systems. I’ve been having this problem that keeps getting worse. I have six Sonos connect amps a Sonos move and two Sonos play bars. Please help me 

I tried multiple times now to connect my 2 seperate Roams to the S2 app but cannot see them in the app. I have reinstalled factory settings on both. I have eloaded/re-installed the S2 app. I have pressed the power button as described in the support but nothing works. Pls support!

Hi everyoneRadio France's FIP radio links load ok using the Sonos app on an iPhone, but have stopped loading on an Android phone. Disconnecting/reconnecting Radio France to/from the app makes no difference, nor does clearing the cache of the app or a reboot of the phone.I am trying to avoid reinstalling the app because I want to retain the data for my system's setup.Any ideas anyone please?

Hello Everyone,I woke up today to find that my Mac Controller could no longer find my Sonos system. I reset Sonos Boost, router and the Mac controller but no luck.  System error says router is not in range and it is right next to my Mac. Is anybody aware of anything going on or have suggestions on how to resolve? I did notice an update to 26.1 of Sequoia as I was heading out the door today and perhaps that will resolve.  I am not sure if related, but I also noticed issues recently with my Mac and sites that use javascript. Perhaps all related? Thanks all in advance. 

Hello,I am using Sonos Ace in my business PC for business calls through teams.I am experiencing issues when I am in a teams meeting, I lose WIFI connectivity and Bluetooth connectivity.The network card in device manager has a caution triangle indicator and I need to re-install the driver every time. This happens 2-3 times every day.Could you please advice for troubleshooting this issue?I do not know if it is a driver issue from Intel but I do not have any problems when I connect my previous Bluetooth headphones  

I have a Sonos One in my kitchen area that will start a timer if I say “Hey, Siri, set a timer for 10 (or whatever) minutes.” Occasionally, I’ll ask Siri a different question and the One will reply that it doesn’t understand the question or that it can’t do that.I’ve occasionally tried this with the two other Sonos One speakers I have, and they didn’t respond (to be fair, the kitchen One doesn’t always), so maybe my kitchen One is an outlier.Everything is up to date, fwiw, and this has been going on for quite awhile—I’m just getting around to wondering aloud what’s happening. I’ve taken to practically whispering to my watch or iphone but I’m wondering if anyone else has run across this issue?

I am unable to play my Spotify “liked” songs through the Sonos ap to my Sonos speakers. I can play all other Spotify features.  I saw other posts on this - with no real answer. Is this just a bug?  Is it because my liked songs list is 400+ or something else?  Thanks 

CBC Music has been broken since the app update. I really miss the music streams that used to work perfectly before — I’ve been checking regularly to see if the issue has been fixed, but now even the live channels (CBC One and CBC Music) won’t load.It’s disappointing that we’re heading into another Christmas without access to the music that’s been part of Canadian tradition for so many of us. It feels like Sonos has forgotten its Canadian users. Please fix this — it’s long overdue.

I’ve used a local add free radio station for my alarm for many years (DR P1). Recently, adds from Tune In began to play every morning. I then deleted Tune In from my stations, but it kept  playing Tune In adds. Every time i try to set-up the alarm using the local station it reverts to chime - or if i choose the station via Sonos Radio, it plays the adds from Tune In (even whithout it being in my stations).This is VERY annoying. Is Sonos becoming an add based system?

I’ve used a local add free radio station for my alarm for many years (DR P1). Recently, adds from Tune In began to play every morning. I then deleted Tune In from my stations, but it kept  playing Tune In adds. Every time i try to set-up the alarm using the local station it reverts to chime - or if i choose the station via Sonos Radio, it plays the adds from Tune In (even whithout it being in my stations).This is VERY annoying. Is Sonos becoming an add based system?

I have quite a few playlists saved in the Sonos app. Most include tracks I searched and saved from Napster to my Sonos playlist. A few days ago, none of those tracks would play. An error message ‘lost connection to Napster’ would pop up and every Napster-derived track would be skipped over until the Sonos app reached a track sourced from a different streaming service. I did the usual stuff — cut the Napster connection, rebooted everything, reauthorized Napster, yadda yadda.Nothing worked. I reached out to Napster. Here’s what I got back:”Hello,  We understand how frustrating it must be to discover that playlists you’ve carefully built over time are no longer accessible. Those collections matter, and we sincerely apologize for the disruption this has caused.Napster is currently undergoing a significant transition. As part of this change, our traditional music catalog is no longer available. Unfortunately, this means that the saved artists, albums, and songs in your playlists have been r

I have a Play 5 that is connected to AT-LP60X turntable. For several years this has worked flawlessly. We noticed earlier this year that the records had a warble sound. Almost sounded like the music was under water. It was in the spring time and we got busy with summer activities. Now that it is cold and we want to listen to our music we are noticing it again. We changed out the needle and tested the speed of the turntable. All was good. Finally we hooked up some headphones to the turntable and the sound was flawless.  I tried some online recommendations and it really seems like an issue with the audio compression setting being removed from the Sonos application. If I reset the speaker, or change the EQ settings. The sound goes back to normal and the distortion is gone, but it will come back usually around 10-15 minutes later.  Supposedly this was an issue with the app update that was fixed. It appears to still be an issue for me. It is VERY frustrating to have invested so much into a