Spaces & Setups

I will be moving to Australia from Canada. I know we have different power cycles and I can use my Sonos equipment on their power but where can I buy the replacement power cords? Thanks for any info.  

I have Apple TV 4K and the Sonos Surround Set (ARC not Playbar). My TV is a Sony Bravia 4K (KD 55X8509C) from 2015.I know that I won't be able to get Dolby Atmos until I either upgrade my TV or buy an HD Fury Arcana.However, when I first got my Sonos set, I could get Dolby Digital 2.0 or 5.1 on Apple TV 4K (on Disney Plus, Netflix etc). Now, everything plays in Stereo PCM. I haven't changed any of the settings. I've used the same content as I did when I got DD2.0 and 5.1.Any ideas? What's going on?

Can an arc be installed vertically? 

Does Trueplay saves after pulling the plug of Sonos Arc? Or a retuning is required?  Asking the question as I had pulled the plug to switch my sonos arc off to reset it to “reactivate” the airplay. The app still shows the trueplay has been set though.  Thanks! 

Is there any way to have different levels of surround volume when streaming Atmos and normal stereo tracks?  At present I listen to music with my rear speakers set to ‘full’ and the surround volume set at +5, however, when I’m playing atmos mixes the music becomes unbalanced as I’ve gone from essentially 2 stereo speakers turned up a bit to the surround channels overpowering a different mix.  if there isn’t a workaround then what’s the possibility of a separate option to be added so that atmos music surrounds can default to a different volume than stereo ‘full’ surrounds? I know it’s a minor thing but it’s quite annoying to have a mixed list and have to alter levels for individual tracks manually, especially as there’s no good way to not play atmos versions when there are any. 

I am using the Sonos SL for rear’s with my Sonos Arc, but I don’t get a lot of sound out of  the two SL. Can this be improved.I am using the system for tv and sometimes for music..

HICan I pair the sonos Beam (1gen) as a stereo pair with the Sonos one SL (gen2) duo Speakers? Kind regards, Georgdy

Hi, can i use my Playbase for making an home theater system with 2 in-celling speakers and a sub, all from Sonos?

Hello,I realize this question has been asked a bunch before, but to be sure of my situation I’m hoping to get some help with what I want to achieve.  Not the most technically savvy person, so hoping to get some guidance.We have a multi-Sonos speaker home and in the living room, have my old B&W speakers connected to the Connect: Amp. We also have a Marantz 2230 that we use specifically to listen to vinyl on our Technics SL-1710 turntable.  I want to bridge everything so that we can play records and hear them on the B&W’s, as well as the rest of the Sonos speakers throughout the house - as well as just listen to the turntable in the sweet spot in the living room via the B&W’s.Is this do-able?  If so, is some kind person here able to detail the connectivity process in order to make this happen?  I understand this will require a preamp. Beyond that, just curious to know about connections and such. Appreciate anything you can tell me.Thanks!Steven 

Greetings, I am preparing to set up a completely new TV room and I could use a small piece of advice.  First details, then a couple of questions for anyone willing to help . . . -TV (Sony A80J) is being delivered later this week-Sonos (Beam Gen2, Sub + two S:1s) is sitting in boxes currently, will be connected via eARC-Ancillaries will also be tossed into the mix:  Sony BRP, Dish Satellite Receiver + OTA antennaeQuestions:-Which should be set up first, the TV or the Sonos system?-Should I connect everything & plug into electric outlets prior to setting anything/everything up?-Any particular pain points or cautions that would be good to know?-Also, is there any value in allowing the TV to do its thing sound-wise along with Sonos?  The TV has decently good native sound (or so I’m told) and I guess I’m wondering if allowing the TV to emit sound along with the Sonos equipment offers some extra “oomph” or if it is best to just forget about this idea?For what it’s worth, I will be using

I listen to music by streaming over my home Wifi network to a Sonos One speaker. The only available connection on the back of th Sonos One seems to be ethernet.  My questions are:Would a decent external DAC improve the sound quality of streamed music to my Sonos One? If so, how would I connect the DAC to the Sonos One?Thanks

Hi All,I am trying to get a turntable system setup and am currently picking out components. I am wondering if anyone has any experience with the setup stated in the title? I read an old thread on this forum about the same setup except the Sonos Amp was swapped out for the Sonos Play 5 and that worked, would my setup be any different? Additionally, would I need the Amp or could I get by with the Port? The speakers I would be using are a handful of Sonos Ones, one Beam, and one Arc. Thank you so much!

Connected System shows Play 3, Play 5 and Move (L & R), but no sound from Moves.

Hi everyone,I’ve seen that in the iOS app you can access directly to the equalizer from the now playing screen.In Android app we don’t have this option, could you add this shorcut? I think is very useful and reduce a lot the time to modify equalizer settings.Thanks!

For my future basement renovations i’m thinking if I have left over budget in the project to buy some in-celling speakers and in-wall speakers but, I like the aesthetics of the in-celling speakers better so will the sound be compromised and not being tuned correctly beacuse they were designed differently verses in-wall + in-celling speakers? I could have all the speakers be celling but people say that sounds less room-filling than having celling and wall speakers. My current plan is to have a pair in-celling, pair in-wall, and a sonos beam.

Hi, having sonos app running in win 10 would be possible adjust volume level of the sonos app from windows volume settings in the task bar?In the same way as we are able on android phone to adjust volume with phone physical buttons. In this way i could be able to adjust line in volume on play 5 using a remote controller connected to my minipcthanksregardsRenato 

Hi,I bought Optoma HD28hdr projector and sonos Beam Gen2 ( with subwoofer ). Can someone please suggest which HDMI splitter I should use. Please share the link, Beam Gen 2 has arc port and HDFURY arcana is very expensive.  Thanks

Is it possible to add  2 ( gen. 3 ) subs with a pair of play 5 using S2 software (same room) Thanks.

Hi, I have two questions  regarding my Sonos Roam which I hope somebody can help me with. Can I place my Sonos Roam in the bathroom? Will it be destroyed due to steam/moist from shower? Can I wirelessly charge my Sonos Roam on an ordinary QI charger (like what I use for my iPhone) or do I have to buy the special Sonos charger if I want it wirelesslybr, Alexander

So when I made a playlist on YouTube music I got all the other playlists and put it in one big one which I’d 1,500 songs for some reason on the YouTube music app it shows 1,500 but when I play it on Sonos it only shows 999 am I doing something wrong? 

I have a Sonos amp and I want to wire 4 speakers to it. 1 pair of svc speakers in bedroom, 1 dvc speaker in bathroom, 1 dvc speaker in closet. Can the amp handle that? All speakers are 8 ohms.

It seems that i have wifi and internet in order to play music on my sonosIs it so?

I treated myself to a sub for Christmas and one thing I noticed during the unboxing ceremony was how the casing didn't quite fit perfectly together along one edge i.e. the inset panel doesn’t sit flush with the outer casing. It is not something I'd think twice about normally but I am mindful of the premium price I've paid here and so was surprised to see it, not to mention somewhat disappointed given that both sides of the sub will be visible.I have included some photos to help illustrate (although I’m not too sure how well I’ve captured the issue - I think it looks worse in real life) and I was wondering if anyone else’s was like this i.e. is it ‘normal’?  

which is more recommended? use sonos roam connected to the electrical current or disconnected since I do not move it from place

With a traditional AV receiver, there are setting to adjust the distance (delay in ms) of the various speakers to align to the main listening position.  I’m adding the Play1 to my beam setup, and do not see that manual adjustment.  My question is does the auto setup actually account for the difference in distance and adjust delay to time align the system, or just simply adjust volume levels.  I ask because my beam will be about 14 feet from my listening position, an the play1’s about two feet.