Two suggestions.
First, try a simple refresh of your network, particularly the Sonos aspect of it. Unplug all Sonos devices from power, then reboot the router. Once the router comes back up, plug back in your Sonos device.
Oh, as an add on, call it 1.5 on the list, double check to see that your router is sending out a 2.4Ghz B/G/N network.
Second (or really third, I should have edited this post, but I’m lazy), if those previous suggestions don’t work, wire your speaker with an ethernet cable as you have, and submit a system diagnostic , and call Sonos Support to discuss it.
There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.
When you speak directly to the phone folks, there are more options available beyond just the diagnostic analysis.
Hi Airgetlam
yeah this isn't my first rodeo :)
Step 1 - Check. Full power down power up in order
Step 2 - Check. 2.4 and 5 are named differently and Playbar is on 2.4. (it’s actually this that i feel is the issue as it loses the config for surround on the app but the surround continues to work, bizarre)
Step 3 - Perfect - will give this a go and report back
Thank you for the assistance
One never knows how experienced the user is, I’ve found it better to not make assumptions.
Just as a note on step 2, if you’ve got it set to N only, and not b/g compatibility, I think it can cause issues.
Remember, the surround speakers aren’t connecting to your wifi, they’re connecting to the sound bar’s 5Ghz channel. You can consider, for most practical purposes, a home theater ‘room’ as its own setup. It has a wired connection to the TV set, and the surrounds and Sub connect to the sound bar. It’s only connecting to your wifi essentially when you’re playing music/grouping it with other Sonos rooms. It’s more complex than that, but it’s a easy and clearish explanation.
Good luck!
I don’t recall definitively whether Nighthawk has an Airtime Fairness option. If it has, then disable it.
One never knows how experienced the user is, I’ve found it better to not make assumptions.
Just as a note on step 2, if you’ve got it set to N only, and not b/g compatibility, I think it can cause issues.
Remember, the surround speakers aren’t connecting to your wifi, they’re connecting to the sound bar’s 5Ghz channel. You can consider, for most practical purposes, a home theater ‘room’ as its own setup. It has a wired connection to the TV set, and the surrounds and Sub connect to the sound bar. It’s only connecting to your wifi essentially when you’re playing music/grouping it with other Sonos rooms. It’s more complex than that, but it’s a easy and clearish explanation.
Good luck!
Haha. No probs
b/g/n set automatically across 2.4
Yeah so I know it’s the issue of the playbar connecting as the surrounds are ‘tethered’ to it. So how do I maintain connectivity…. conundrum
My solution was not relying on my Netgear router, and instead using a BOOST connected to it via cable. YMMV.
I don’t recall definitively whether Nighthawk has an Airtime Fairness option. If it has, then disable it.
Hi ratty
Thanks for the tip, I can’t find airtime fairness on the Nighthawk app or the netgear web interface
not sure my model supports it and I can’t find any reference to support on the web
Thanks again
G
You probably already addressed this, but…..Did you give your current network a new name and password? Your Sonos could be storing the old credentials. Either delete the wifi credentials in your Sonos system, or give your new network the same name and password as your previous router.
You probably already addressed this, but…..Did you give your current network a new name and password? Your Sonos could be storing the old credentials. Either delete the wifi credentials in your Sonos system, or give your new network the same name and password as your previous router.
New name, new password.
changed purely to deconflict any potential issues.
My solution was not relying on my Netgear router, and instead using a BOOST connected to it via cable. YMMV.
Ah!
Something tells me a Boost may be required
Balls
Any speaker wired to LAN will put your Sonos system into Sonos Net.
Any speaker wired to LAN will put your Sonos system into Sonos Net.
Yep, but I don’t have any LAN points near the speakers
I think the bridge will do the same for £10 on eBay ???
router under the stairs in the middle of the house, speakers in the rooms, no cat5/6 points in the rooms either
BRIDGE is S1 only, so no. You’d want to go with a BOOST, or as Keithmac suggests, a wire to one of the non-bonded speakers. Meaning not a surround speaker, not a Sub.
However, like you, I don’t have any speakers close enough to my router to wire, so I did end up with a BOOST. After ensuring it didn’t share the same channel as my wifi, it’s been fairly bulletproof. Except for one time when a neighbor moved in and stomped all over that channel, I just moved to the other one, and it’s been fine since then, too.
Hi all
Thanks to everyone who tried helping
To put all yours minds at rest I simply changed the 2.4 from Auto to channel 11. I though about 6 but moved it as far as I could incase of any ‘other’ issues I just naturally assumes Auto would be the better option. We learn!!
So far we are rocking and rolling with the Sonos S2 app immediately picking up all speakers and their configs
Thanks again to all
