‘Nothing in the network has changed’ doesn’t make a lot of sense to me. Networks are never stable, both from inside software updates, and external network influences.
My suspicion is that you have duplicate IP addresses, and the Sonos and some other network device are fighting over a connection. The quick and dirty fix is to unplug all Sonos devices from power, then reboot the router. Once the router has come back up, plug the Sonos devices back in, and they’ll request new IP addresses from the router. Of course, setting up reserved IP addresses in the router’s DHCP table is the longer term solution.
The sonos systems are on static IP addresses and are connected as I said in the post, to a switch. This is not a home network setup. So again nothing on our system side changed, there was a Sonos update and that is what broke the system. Not a helpful response at all.
You didn’t say so in your initial post, only that ‘the IP addresses hadn’t changed’, which says nothing about the rest of your network at all. So that wasn’t very helpful, either.
However, since you’ve provided a diagnostic which only Sonos has access to, I’d recommend that you call Sonos Support directly to discuss it. For better or worse, this is a community forum, support folks don’t ‘live’ here.
If the IP addresses havent changed and as Istated nothing on the network changed with your thinking it must be a network issue. Again this happened after an update from Sonos not a network change.
Thanks again for doubling down on the snarky response.
Moderator Note: Modified in accordance with the Community Code of Conduct.
I recommend you talk with Sonos Pro, as they are better suited to deal with your issues.
https://www.sonos.com/en-us/sonos-pro
If you are already subscribing, then you should have a support number you can contact. If not, then maybe start with sales.
Any security devices or firewall settings preventing the Sonos from connecting to each other or to remote servers?
If the WiFi (actually the whole internal radio) won’t turn off Sonos isn’t seeing the Ethernet as working.
Talked with “Sonos Pro” for over 2 hours. All they gave were responses for a home network and not a business setup. Even after explaining our network setup and how these devices have been working seamlessly for years they still didn’t understand that I can’t just unplug the router….
The update that happened through iOS on 7/26/2023 broke our system setup and the only other suggestion was upgrade and not replacement. What a horrible experience both with the devices and through support
We will be taking our business elsewhere.
This issue is not resolved.
I read “upgrade”. Where you using S1 devices with a Sonos Bridge?
