A Sonos user would like to have a line in at the back of the PLAY:1.
What do you think about it?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Not getting this! Why is everyone keen to have Line-In?
"SONOS - The wireless system" #keyword #wireless damn it why can't they do away with a power cord and make it 100% cable-less.
I have had a couple of home theatre set-ups before where I had wires every and frankly am so glad i'm wire free. Shame I can't set up a mesh-network to isolate the rest of my AV kit.
Good news: you won't have to use the line-in if you don't want to.
But I could find some good use for it. I would be able to hook my PC into it.
If Sonos baked a line-in into a next-gen Play:1, maybe we could hook it to a PC via Line-In AND create a stereo pair with another older, line-in-less Play:1. That would be awesome.
By the way, my Sonos speakers are connected via Ethernet. If there's something I've learned from WiFi it is that a wire is always better.
It definetly needs a line-in sooner than later. I would love to hook up a stereo pair of PLAY:1 to my TV or PC. Currently the only other option to do so is buying an expensive additional unit that does have a line in so the sound can be shared. That makes my instabuy a no buy for now.
This is the one massive issue I have with Sonos system. Don't get me wrong I love almost all of it, but it is really frustrating that I can't line-in to anything. I only have two play:1's and a playbar. so I don't have access to a line-in port.
It isn't so much that we need a line-in on play:1... what would be much much more useful would be a very simple and cheap (i.e. no more that $50-90) bluetooth 'dock' that may have a line in port that I can connect any output from any electronic device that uses bluetooth too it. I would pay for this separately... very happily. My only option at the moment is to buy play:5 or connect and then buy a LOGITECH (go figure) bluetooth connector. If you were smart you would not only have it bluetooth but line-in and maybe even build it in such a way that you could stream to an ip address on your network leaving it open for future steaming options (user controlled).
We are using the bose portable speaker instead of our very expensive (and much better) sonos system simply because we can not easily do that.
This is the one massive issue I have with Sonos system. Don't get me wrong I love almost all of it, but it is really frustrating that I can't line-in to anything. I only have two play:1's and a playbar. so I don't have access to a line-in port.
It isn't so much that we need a line-in on play:1... what would be much much more useful would be a very simple and cheap (i.e. no more that $50-90) bluetooth 'dock' that may have a line in port that I can connect any output from any electronic device that uses bluetooth too it. I would pay for this separately... very happily. My only option at the moment is to buy play:5 or connect and then buy a LOGITECH (go figure) bluetooth connector. If you were smart you would not only have it bluetooth but line-in and maybe even build it in such a way that you could stream to an ip address on your network leaving it open for future steaming options (user controlled).
We are using the bose portable speaker instead of our very expensive (and much better) sonos system simply because we can not easily do that.
Raymond - since you have a playbar you already have an external input to sonos You could buy a Bluetooth adapter with a Toslink output such as this: https://www.amazon.co.uk/dp/B00M0CXRGU/ref=cm_sw_r_awd_5FqHvbA8NG7EY And to avoid having to switch cables between the TV and the Bluetooth adapter you can buy an inexpensive optical switch also like https://www.amazon.co.uk/dp/B00QIEISW4/ref=cm_sw_r_awd_TLqHvbHWCAFNQ The TV input can be sent to any other Sonos devices. Only limitation is that you cannot listen to Bluetooth content on the play 1s (via the playbar) and different TV content at the same time.
This is the one massive issue I have with Sonos system. Don't get me wrong I love almost all of it, but it is really frustrating that I can't line-in to anything. I only have two play:1's and a playbar. so I don't have access to a line-in port.
It isn't so much that we need a line-in on play:1... what would be much much more useful would be a very simple and cheap (i.e. no more that $50-90) bluetooth 'dock' that may have a line in port that I can connect any output from any electronic device that uses bluetooth too it. I would pay for this separately... very happily. My only option at the moment is to buy play:5 or connect and then buy a LOGITECH (go figure) bluetooth connector. If you were smart you would not only have it bluetooth but line-in and maybe even build it in such a way that you could stream to an ip address on your network leaving it open for future steaming options (user controlled).
We are using the bose portable speaker instead of our very expensive (and much better) sonos system simply because we can not easily do that.
You would only be able to select the TV input from the Playbar in the Playbar zone or when the two zones are grouped.
If you have an iOS device and a Mac then I recommend that you download SonoAir, then open it, right click on it in the dock, click options, click Open At Login so that the app... Opens when you login.. When the app is open, your SONOS speakers will appear in the AirPlay menu. If you use this app, remember to turn down the volume on your iThing before you try it for the first time.
Translate
- SONOS user since 4th September 2010 - Report innapropriate posts using the flag in the bottom right of the post
This is the one massive issue I have with Sonos system. Don't get me wrong I love almost all of it, but it is really frustrating that I can't line-in to anything. I only have two play:1's and a playbar. so I don't have access to a line-in port.
It isn't so much that we need a line-in on play:1... what would be much much more useful would be a very simple and cheap (i.e. no more that $50-90) bluetooth 'dock' that may have a line in port that I can connect any output from any electronic device that uses bluetooth too it. I would pay for this separately... very happily. My only option at the moment is to buy play:5 or connect and then buy a LOGITECH (go figure) bluetooth connector. If you were smart you would not only have it bluetooth but line-in and maybe even build it in such a way that you could stream to an ip address on your network leaving it open for future steaming options (user controlled).
We are using the bose portable speaker instead of our very expensive (and much better) sonos system simply because we can not easily do that.
wow Josh, this is almost eactly what I was looking for an wondered why sonos haven't added it themselves... thanks
& Thanks NickA. I might still set up that option too.
I have tried some comparisons. Yes there is a delay (70ms) but when I tested I could not see a lip sync error. Now if I turned my TV speakers up at the same time as the Sonos speaker I could hear an echo because they were not 100% in sync. If someone were sensitive to lip sync error I can't guarantee they would not see the 70ms delay Sonos introduces for the A/D conversion and synchronization. I personally found it acceptable (actually surprisingly as I thought I was sensitive to lip sync) but others may not.