Spaces & Setups

cum pot conecta la tv smart play 1 si play 3 , imi trebuie sonos connect prin cablu audio ?

Provocative question. Currently still running the 16.1 app on Android. Have a range of products from S1s through to Arc + pair  Era300s. System is mainly used for listening to music from NAS and surround sound for TV/movie watching. Some functionality is now greyed out in the 16.1 app, other than that I'm happy with the old app.Is the new app now safe to upgrade to? What would Sonos representatives present on this forum recommend? Is your new app now safe to use? Is it a better experience versus the old app?As an objective measure for when the Sonos executive team should start to receive bonuses again I'd suggest an 90%+ yes response rate to these questions would be a good yardstick. 

Have 2 Monitor Audio C265 speakers in the ceiling of the master bath with a wire run back to our AV closet where the plan is to connect them to a Sonos Amp.  In the master bedroom the plan is to have a 77” LG G4 OLED TV with a Beam Gen 2 speaker underneath. I do have 2 cat 6 cables run from the TV location to the AV closet but big hassle to run anything new. So questions: Assuming I use the Arc HDMI to connect the TV to the Beam? How do I get the bathroom speakers to play whatever the TV is playing and without any sound delay? My previous AV guy said there was a way to use the cat 6 to get the signal from the TV to the Sonos Amp? or is there another way?Thanks.

Hi everyone,  I recently purchased a Pro-Ject Debut Carbon Evo (Nogal) turntable, and I currently have a Sonos Beam (Gen 2) sound system. I have a couple of questions regarding connectivity: From my understanding, I can't wirelessly connect the Pro-Ject Debut turntable directly to the Sonos Beam 2. Is that correct? I’m considering purchasing the Sonos Era 300 speaker to pair with the turntable. Would this be a good option? Is there any additional equipment needed to ensure the turntable works properly with it? If I add the Era 300 to my Sonos network, would the sound from the turntable play through the Beam 2 as well, or just the Era 300? Thanks in advance for your help!  

I have a MacBook Air M2 2022I want to purchase 2x Move 2 & 1x line-in adaptedI want to connect both Move 2 as a stereo pair and connect to MBA using line-in adapter.Is this possible?

My Sonos Amp is happily pumping surround sound from my Arc. If I connect, say, a WiiM Ultra preamp by RCAs as an Roon end point, will that cause a problem with my surrounds? Or can the Amp detect and accept which input is active? I don’t want to struggle with needing to reconnect my surrounds, I just want this to work. Possible?

Litt Live (formerly Dash Radio) inside Sonos has had an issue on my system for several months. When I play a Litt Live station, it gets added to the list of "Recently Played" items in Sonos.However, when I try to replay that Litt Live station from the "Recently Played" list, Sonos always serves a "Content is Unavailable" error. I tried to troubleshoot this with Sonos a couple of days ago, but they couldn't help.After almost 2 hours wasted on the phone rep and with their chat rep, they finally told me that the reason for the problem was that Litt Live "had been removed from Sonos" and was no longer an available service. They said that the Sonos developers had just had not gotten around to removing the Litt Live service from the services available, which is why I was still able to remove and re-add Litt Live (per their instructions) to try to troubleshoot. Does anyone know if this correct? Is Litt Live no longer available as a service inside of Sonos? Thank you.

When I change radio stations the Sonos screen does not change to the new station. Tonight, several hours ago, I was playing BBC Radio 4, I then switched to Radio 3, then BBCScotland, then Radio Swiss Classic, then MDR Rundfunk. However, the screen still tells me I’m playing BBC Radio 4 !!!Dear Sonos reps, were you aware of this, or am I first in line?

Hi,Just moved in to a home and I'd like to set up sonos in the common areas of the home. Mainly would be for music, but I'd like surround sound in the living (gathering) room if possible. Will often watch TV while in the kitchen as well, though. TV is on the right-most wall of the gathering room (see pictures below).Master currently has a sonos arc, sub, and 2 play 5s. I am looking to fill out the rest but am very unsure on placement, speakers to get, etc. Am hoping someone here would be able to provide guidance on where to start?Ive attached the layouts. Below are the rooms I was considering adding speakers for:Kitchen + Gathering + casual dining (as a group)Foyer Game roomUpstairs loftIf anyone has suggestions then they'd be very much appreciated!    

I have a Sonos Amp (connected via wire) to in-wall speakers in my living room, but in the dining room have a turn table. If I purchase a Port and wire it into the turntable, can it wirelessly connect to the Amp to play music from the living room in-wall speakers? Is there another product I should be purchasing instead of the Port that could do this? 

I have 2 trailers used for tailgating. Currently, we use a Yamaha receiver, B&W 601s, and Def Tech Super Cube sub in one trailer. We are using a Connect for music streaming. We want to extend to the other trailer with a play base and multiple Ones. WiFi is not a problem and neither is power. Will the Connect allow us to add the others and group everything? 

I use my Roam in the bathroom where it does get wet through the steam. Although it is waterproof to a degree, I would like to prevent damage. I am informed that a waterproof cover is available. Is this correct?

I’m about to get a Beam Gen2 and have a question regarding my setup to ensure I can get Atmos.Components:Samsung TV Sonos Beam Gen2 Nvidia Shield TV Pro 2017 (supports Atmos passthrough)The TV has 2 HDMI ports, 1 regular, 1 eArc. I imagine the setup to be, connect Shield TV to regular HDMI, Beam to eArc. If I’m playing content supporting Atmos on the Shield TV (Netflix UHD for example) will this output Atmos audio to the Beam? Thanks in advance.

Hi, I use the latest Spotify App on iOS 18.0 and setting up the alarm with a Spotify playlist does not workwether I use and existing alarm or create a new one the following happens:Open Edit Alarm → Music I search for my playlist  Select the playlist get “Set Alarm music” promt - “ would you like to use”XXX” for your alarm music tap “OK”  App goes back to Alarm overview “Alarms” ( I can see it briefly stepping back in “Edit Alarm”, then back to overview “Alarms”)  Alarm music is not changed / still Sonos ChimeI tried reconnecting Spotify, reinstall App and its Spotify premium

Trying to connect Amp to Apple HomeKit. HomeKit no longer allows you to add an accessory that isn’t discoverable. It use to give you a list of gives compatible devices where you would find the Sonos products. You now need a manufacturer “Setup Code”. What is this code for Sonos and where can I find it?  

Hi all,How do you manualy rearange queue order? Is it possible?Thank youNeven

Finally after lots of battles, I have enabled Sonos to play an Apple music track .  Two questions: why doesn’t it report what it’s playing and separately: why can’t I edit tracks in my music library - perfectly possible under previous iterations.

Hello, As Sonos claims to make the new s2 app more user friendly and customable.  please allow users to add their streaming radio url’s. Tunein is horrible. I don’t wat to pay for a relay to listen commercial free.Just counted the commercials during one tune turner song! 3 times !! 3 times serious a commercial for Disneyland Paris! So disturbing. so Sonos, allow users to add streaming urls. regards, willem   

Hi, I am looking to connect a projector sitting at the back of my living room to an Arc soundbar mounted on the wall at the front of the room. Originally I was considering running a HDMI cable through the ceiling to connect the eARC port from the projector to the eARC port in the Arc soundbar, but then I was looking at the Sonos AMP and thought that might be an option. The projector i’m looking at has Google TV so I can stream directly from it.Can someone confirm if the scenario below would work?Projector connected to the AMP via the HDMI ARC port. AMP connected to the Arc soundbar via wifi. Sound would run from the projector, through the AMP to the Arc soundbar. So I’d be able to transmit the sound from the projector to the soundbar wirelessly with the help of the AMP, saving me a lot of trouble (and cost) with running HDMI through the walls and ceiling.  Would this work? Any drawback/limitation to this I should be aware of?  

I’m hoping to get the following setup:ARC home theater set up with two wireless surrounds and sub in FR In-ceiling speakers with amp in Kitchen In-ceiling speakers with amp in DRWe’re not hard-core audiophiles but would like music and tv to sound good. We also would like flexibility so, for example, sometimes listening to the t.v. In FR and kitchen but sometimes having t.v. on in FR while music streaming in the kitchen. DR may be streaming something else?So, I guess my question is (and apologies if it’s been answered and/or is naive) whether this is the right setup (or *a* right setup) for this? Is there something I should be concerned about in this configuration?Many thanks for any help. 

I’m looking to make a big purchase soon for the beam and sub mini.last year I seem to recall a 40% sale around September. Is there any information or insight into whether they will run this again?? Thanks in advance for your help.jay

I have owned a Sonos since they were featured on Queer Eye donkeys years ago. I have owned the original CR100 controllers and updated to the new series 3 years ago. How the f$%k do I select a different room to control without switching whats playing in my current room?I really hope all the people involved with the new app are burned at the stake. If asked, I now actively discourage people from buying a Sonos product. Cant even figure out on mobile how to change music… I have to go to the desktop app.  Associated Product: ---------------------------------Beam: BasementPlay:1: Basement (LS)Play:1: Basement (RS)Play:3: Basement StorageSonos One: Ellas SonosPlay:1: James SonosSonos Move: Jeremy Office (R)Sonos Move: Jeremy Office (L)Sonos Five: Kitchen (L)Sonos Five: Kitchen (R)Sonos Five: Living Room Sonos (RS)Sonos Arc: Living Room SonosSonos Five: Living Room Sonos (LS)Beam: Master BedroomSub: SubSub Mini: Sub MiniSonos One: Williams Sonos 

I posted this in another topic, but it seemed that it required its own topic, as I couldn’t find any existing posts about it: Yes, in addition to the multiple copies of albums, which appears to happen due to multiple artists on an album, the track listings are also screwed up due to multiple album artists. And YES, I HAVE “SORT FOLDERS BY” SET TO “SONG NUMBER”.  Just wanted to clarify. The track listings are now sorted by the “Artist” meta data and then the track number.  Here’s an example from my library from Tha Alkaholiks album “21 & Over” - this is the order of the tracks listed and the Artist metadata, so you can see how the sorting is broken by sorting on the Artist.  All the meta data for these tracks are fine - the track listing is displayed correctly in the Apple Music application, but here’s what Sonos displays for the track order: Track 02 - Tha AlkaholiksTrack 03 - Tha AlkaholiksTrack 04 - Tha AlkaholiksTrack 08 - Tha AlkaholiksTrack 09 - Tha AlkaholiksTrack 07 - Tha Al

Why is the new app so bad. I can’t clear the queue of music. Does any one know how to do this. Very frustrating.   

Hi folks; I have a restaurant with 6 Sonos One’s in the dining room. They want to have the option of using a stereo line level sent to the Ones rather than the app. Is the AMP an option? Is there a piece of (3rd party) hardware available to stream to the One’s? Maybe a raspberry pi?The AMP would be great because then I could get them to add a couple of subs.Any thoughts would be greatly appreciated! TIAGlenn