Your one-stop shop for discussing Google Assistant with Sonos. How do you add Google Assistant to Sonos One or Beam? Get your answers here.
Recently active
Hey guys, I’ve noticed kind of a weird problem that happens with my Sonos speakers and using google voice commands to play music via Spotify. I was curious whether anyone else noticed the same problems. Normally, when asking Google assistant to play music (again through Spotify,) everything works as expected. However, I’ve noticed that, if I use the Sonos app to select/play something w/ my phone, and then later try using a google voice command to play music, Google assistant will acknowledge that the song will be played, but nothing happens. If I repeat myself and ask a second time, it will play properly, but I’ve notice that every time I try doing a voice command to play music after having used the sonos app to play music earlier, I always have to say the command twice before it’ll play properly. Does this happen to anyone else using Spotify w/ Google assistant? Thanks.
I have a Beam in the lounge with two One SL’s as surrounds. Google Assistant works fine on this setup. I have just bought the Roam and when trying to add the Google Assistant, it simply does not find the device. I have now tried it several times, both through Google Home and also starting within the Sonos app. I removed Google Assistant from my Beam and tried again in Google Home, it found the beam instantly … but not the Roam. Ugh. The Roam is on my network, I can play Spotify through it, I can add it to other speakers to play the same music concurrently (speaker groups?) … but I can’t add Google Assistant … as Google Home just cant find it! Frustrating to say the least.
Reaching out to the community after multiple attempts via Chat and over the Phone to support at Sonos, and trying multiple recommended solutions. I’m having this weird issue where my Sonos Arc (purchased Nov of last year) will not work with Google Assistant after an unknown length of time. I have set up Google Assistant and it will work find for an hour, 5 hours, a day, maybe sometimes even a week - then all of a sudden when I say “Hey Google”, it will just tell me “There was a glitch, try again in a few seconds” or “Something went wrong, try again in a few seconds”. I have tried the following:removing Google Assistant and re-adding multiple times removing Sonos from my Google Account multiple times unplugging Sonos Arc and plugging back in multiple times tech support made some updates to DNS settingsAfter each of the above, the Arc will work for a little period of time, then randomly go back into the “There was a glitch, try again in a few seconds” or “Something went wrong, try again
Hi,i just got the new sonos roam and when ever i switch it off, it switches on again. How do i keep it off? Thx
I can't add Sonos to Google's Home or add Google Assistant to my Move. Both approaches fail after giving my Sonos credentials, telling me to register speakers to my account. I have 10 speakers registered to this Sonos account! I used to have it all working, specifically allowing me to use my Sonos Port as the default speaker for a bike mini, in my kitchen. This all broke, so I removed the integrations and started again. But it added my V1 Connect, not my V2 system. So I moved my V1 Connect to a new Sonos account, leaving all my V2 stuff on the original account. Now I get this issue when trying to add Google Assistant integration to my V2 system account.
I also have a Roomba that works flawlessly with a Google Home Mini, but I can't control it with the Google Assistant through my Sonos One.Can someone help me with this problem?
I have the so is S1 app. I just got google home and added my so is products to it. They all appear but there is nothing that I can do on them using the Google Home assistant. Do I need to be on the Sonos S2 app?
This is ridiculous. I buy 2 Sonos One, only to discover that Google Home integration isnot available in my country. Neither is Alexa. And I see other people have complained for years about this. How hard can it be?
Hi, if i purchase 3 Sonos Roams for my 3 children, can each of these 3 roams be linked to a different google account ? And if so, can each Roam still be accessed as part of my Sonos Home in the app ?
Hi,Google announced their Assistant and Apple Music are now compatible on Smart Speakers: https://www.google.ch/amp/s/blog.google/products/google-nest/never-miss-beat-apple-music-now-available-new-nest-audio/amp/ When will Sonos join it‘s competition?
To whom it may concern,For the entire day of today, I have tried setting up the google assistant in my Sonos speakers. I've had the Sonos One, and the One SL for a while, with the assistant working perfectly until today. As soon as I added the Roam to the app, the problems began. I cannot add the voice assistant to it, moreover, the voice assistant doesn't work whatsoever for any of the products.I have tried the countless solution in Sonos forums and on Reddit, with no success.Once I get to the Google Home app, and it asks me to sign in to my sons account, it redirects to a page that asks for me to update my app (it is updated), and that there are no speakers on my account (yes, there are)I have reset all the accounts, re-installed everything, factory reset all the speakers, deleted and adjusted everything I could. Created new accounts to try and add the Google assistant, but nothing has worked. I have submitted diagnostics #999897859
Hi. First, my english is bad, sorry for that. When I asked my sonos arc to turn of the tv, it says ok, but nothing is happening. When I ask it to turn the TV on, everything is working fine. When I ask it to turn the volume up or down, I get a messenger that something went wrong. Anyone out there knowing whats wrong?
Can’t play music talking with GA. this is the answer I have.
Despite the “we won’t support your old speakers” fiasco, I bought a Sonos Roam. What could go wrong buying a Bluetooth speaker that works with Sonos? I have to upgrade to S2. So I did, and had to split my system. I still don’t have the S1 system working even after 2 hours on chat with support yesterday as it still sees the new speakers. So I’ve put that on hold, and trying to get S2 to work. All compatible speakers including the Roam are visible in S2. Sonos is linked to Google Home. But I don’t see any speakers other than the Roam. When I reconnect Sonos in Google Home, all speakers show up for a few seconds, then disappear. In the S2 app, Settings/Services & Voice/Google Assistant shows only the Roam under Sonos Products. The speakers do appear in Google Home for a short thile, before disappearing. Has anyone seen this? I can’t face more time chatting with support, resetting speakers, turning my phone on and off. With S1, I was very impressed with Google integration.
The Beam google assistant worked fine for a year, but coincidentally around the time I’ve updated the iOS sonos app to v2 I couldn’t use the assistant anymore (I say hey google and get the response in the title of this post). I’ve managed to fix it twice by going through the google assistant and sonos app and reconnecting everything, but next day it comes back to this. Tried to uninstall the sonos app v2 and use the v1 again, but it can’t connect to it, probably because sonos v2 had installed a new firmware to the beam when I first installed it. is there a permanent fix to this?
For quite some time now my Google Home Hub can not control my connected Sonos speakers, no matter what command I give. I unlinked and link the Sonos service multiple times and all speakers appear in their correct rooms in the Google home app. Whenever I select a speaker in the app though, I don’t get any controls (think I used to?) just a screen with basic information: Sonos speaker in Google home appAlso, when I select ‘Media’ in the Google home app, my ‘kitchen display’ (the Home Hub) is the only device shown. I tried to do the voice assistant set up via the Sonos app as shown in Set up a Google Assistant device to control Sonos but instead of the option to ‘set up your google home to work with Sonos’ shown in the GIF, I only get the option to ‘Add to Sonos’ which brings up the option to set up Google assistant on my Move (which has this function built in of course). Not what I want I don’t think. I don’t want the Move responding to my Hey Google, commands, just the Home Hub, which I
This has been asked about before but the forum threads seem old. So here it is again in case there is new information available.My Sonos 1 sometimes understands commands but mostly doesn’t. We end up shouting at it, singing at it, saying please, and then usually give up and just play spotify/radio on it by using the app instead. Sort of defeats the object. For now I have the Google Home back in it’s place so the family can all use it without stressing every time. The Sonos has been relegated to my workshop where it barely sees the light of day :( Any help please
Can you make old model Sonos play 5 etc work with google assist etc, can it sync with a google nest or any other options, Cheers
Sonos has no support for my country SERBIA.When I try to connect to google home or Bixby I get the message "I don't support your country"Can you make an effort to get my country SERBIA full support for sonos speakers, such as apple music and Tidal and other services available in my country.Believe me there are plenty of users who use your speakers.Hoping you will listen to my suggestions many greetings.Goran Stojanovicm I Don't Want To Miss A Thing *Moderation note: avoid posting personal details on a public forum*
Hello, does anyone know if it will be possible to connect the sonos equipment to google assistant in my region (ARGENTINA)? I have an automation and home automation company and we want to implement the sonos equipment to our offer. We currently use FINDER equipment for automation, and samsung. Thank you very much for your time.
Just wanted to shout out if anyone has this experience. When a voice capable (I configure them with Google VA) device hasn’t been “spoken” to in a long time (I didn’t pay attention to what constitutes “a long time” but my hunch is around the order of 2-3 days), the first time the response will contain an audible click (very soft but nonetheless audible). I will try and submit a diag next time this happens. What other info can I collect if this happens again?
Having trouble adding the google assistant to arc. No issues adding to move or one. the google assistant app just says “no device found” when i try to add to my arc... All devices on same wifi set up.Have already tried factory reset, unlinking and relinking sonos account to google assistant. Super frustrating as I want to use my ones as surrounds with the arc but not lose the google assistant. any tips?
Every time I try to connect to coonect my Google and Sonos account i got the message that i have to connect my speakers to my sonos account.When checking my sonos app they are connected and i have the newest update on the app, what can I do?
Gave google assistant a shot on my Sonos Beam - started a podcast on Spotify, which worked fine, but then if I try “Hey Google, fast forward 30 seconds” or “Hey Google, rewind 30 seconds” - I get the “sorry I don’t know what you mean” error.When I switch over to Alexa, it works perfectly fine.
HiThank you very much Sonos for this.My system was working perfectly fine until last week one of my speakers (bookshelf) started acting up. Since I have a wifi extension I wondered where it was connected exactly so I decided to reset it.I boot my tablet, (android 7 working perfectly well up to then), and it says: “there is an update for sonos app”. And idiot that I am i hit “update”….it took a while to update and me wondering why …..Surprise!!.The new piece of whatever refused to add a new speaker because “android 7 is no longer supported” And I haven’t been able to find the previous version of S2 to just stick with it.So as the double idiot that I am I go and decide to buy a new tablet with android 10.And what now?Yes, I can now readd my speaker to the system.But this thing comes with something called Google Go. And you can’t delete it. You can disable it but Google play doesnt care. It’s still there and GP refuses to install “Google LLC” instead. Why is this important you ask?Becaus
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.