Components & Architectural

Hello, I just wired with ethernet cat 6 my entire flat and decided to go to an all wired setup for my sonos system and everything seems to work just great after disabling wi-fi in all the devices and removing a sonos boost that was part of the setup. The problem Im having is only with the rears of my Arc+sub+2xplays 1s in my living room. They keep cutting out constantly. It is like the ambient sound cuts for half a second and comes back again immediately after but it just doesnt happen once, it keeps happening every ten seconds or so.And I think it only happens with dolby atmos (both TRUEHD and lossy one) on both my shieldTV and apple tv 4kAlready sent a diagnostic while it was happening with the number 809032159is there anything I can troubleshoot? It is a really annoying issue. thanks in advance

Since upgrading to S2, connect stopped working. call tech support. they say I have to replace the unit. Is this normal? 

Just now, 4:30PM eastern, 2021-02-28 all of my S1 controllers fail to find my Sonos systems.All a re at S1.  No S2.  I have Connect devices that must stay at S1, so my entire system is at S1.I have tried resetting individual systems - to no effect.Less than a week ago, I was given the option of “staying with” the S1 system.  Up until then, I got regular nag notices that I needed to upgrade to S2.  I do not want to do that.  I’m not sure if this is related, but it is a change within the last week.I have tried the S1 controller on Windows 10, iOS, and Android systems - all fail with the same message “Existing system not found.” Anyone else?Any ideas? 

Hi -I cannot get my gen 1 connect amp working with S1 app over wifi, only with ethernet cable. I have read other messages here saying to go into advanced network settings to update wifi password.I don’t see where this is possible, only a setting for wifi is enabled or not.Can someone please suggest how to get connect amp working with wifi?thanks!!

I have Playbase and 2 one’s. I just did the latest update to the app and gear on 3/9/21. Every time I turn off the Apple TV or listen to music, Sonos defaults the tv sound to my tv and music for the Sonos. I have auto play tv checked. 

Hello, I have a troublesome Connect Gen2 that somehow can’t stay connected to my network for more than a few minutes. It doesn’t matter if it’s connected via WiFi or Ethernet, it always ends up disconnecting. I can sometimes get it back by rebooting it, others I need to factory reset. All my other Sonos products have a rock solid connection via WiFi.I’ve browsed through different other topics but couldn’t find any solution that worked.Is it possible that the device is actually dead, even though still “very partially” working ? Here are a couple of red flags I noticed while troubleshooting:The factory reset is hit and miss. Usually have to try up to 5 or 6 times to get it to end on the green status led. Most other attempts just blink amber/white 3 or 4 times then turn solid or blinking white again. After it stops working, I often still see it listed in the app, but when browsing the “About my system” tab it only shows its name and no other network details like for my other functioning d

HiI have 4 Sonos system in my house.Play5 (gen2)2x OneArcSince purchasing the latest Play One, the Sonosnet seems unstable.It is the second time now that all systems leave the network and can’t connect to wifi, except for the newest Play One which stays on the network.All are fairly near the router as I live in a small condo.In fact, when I try to connect the dropped system to my WiFi, they successfully get the password prompt, but entering the correct password leads to an “error, cannot connect”.Here is the latest diagnostic report #: 1097299673Thank You

I have 4 Amps connected in a wired ethernet daisy chain, which are then connected to a 24-port GE switch, which is in turn connected to my router.  All four have static IP Addresses, appear in the router’s client list, and show up in “my system” as online when logged into sonos.com via a browser.  Wireless on all 4 is disabled.  However, each one at some point will disappear from the app. I can tell when it’s about to happen.  When attempting to start music via Spotify in a room, if it doesn’t start playing right away, it will hang there for a while, throwing the “selected song cannot be played at this time” error before finally disappearing altogether.  I can only have it rejoin the system by power cycling the affected Amp, which is not totally simple as they’re in a rack.  This has been happening since install 2 years ago and I’m losing hope that there will be a software fix. 

Hello,I have multiple sonos devices. All of them are placed on WM = 0 as my ARC is wired.All other devices (Sonos Play: 1, Sub, Sonos Ones, Sonos Play_5s) are all on WM = 0 apart from a single Sonos One. I have power cycled it, factory reset to no avail.If I factory reset and wire it, it will show up as WM = 0; however as soon as I unplug the ethernet cable out of the One it goes back to WM = 1.Diagnostic 1596752830Any ideias? you help is appreciatted!    

I keep getting a message that I have to many playlist for the Sonos App.  I have deleted 200 playlist from my music server and still the message.  I went through the Sonos Music Library imported playlist and found three that do not exist on my music server a Mac MiniLibraryMusicPurchasedHow do I delete these from Sonos? I called Sonos support and he said it was an Apple issue, then hung up.  I am not impressed with support.

Hi,Because I could not solve this error code as instructed (Sonos support page),  I’ve decided to replace my router with a Videotron's router, my Internet provider. I also reinstalled the latest version on my devices Samsung phone - (new) Ipad air2 - Samsung tablet (Android 10). All my systems has the latest version of the software but the system keeps trying to update the app !? Result, almost all of the settings are still not available. Now, the router can't be the problem, all of my componants have been reset..... Any suggestions ? Thanks

Hello to all, today phone music library is not completely found. It was before. Additionally  the  Artist index is not in alphabetical order.Any clue? Kind regards, Arnaldo 

I bought a Port to play music from a Pro-Ject turntable to a couple of Sono One and a Subwoofer. The sound playing is so low you can barely hear it. what’s weird is there’s sound but it barely audible. Any suggestions?  tried switching cables. Resetting. And even did a couple of chants. Nothing seems to help. 

I’m currently unable to browse music via my ‘Favorite Tracks’ under Deezer within Sonos.  I also noticed that I’m unable to add tracks to queue from Deezer within Sonos.  I’ve tried this on both my phone and my wife's phone with the same results.  The issue appears to be unique to Deezer on Sonos. So far, I’ve reset the entire system and my router.  I’ve reset the app multiple times.  I’ve removed Deezer from Sonos and subsequently reauthorized it.  None of this has worked. Suggestions?

I have an Amp, Playbar and Play 5 in different rooms. I never updated to S2 as I didn’t want to use 2 different apps.  When I opened the Sonos App today, my amp is now gone. I can cast to it so I know it is still working, any thoughts as to why it disappeared from both my iphone app and desktop app?

Hi,I’m using a Sonos One and playing from my MacBook Pro (OS 11.2.1).When playing streamed music to my Sonos it keeps cutting out all the time. Has anyone experienced this and have they found a remedy?Thanks

Moved recently and now when pausing podcast through Sonos, it won’t allow me to resume but instead re-starts from beginning.  I assume this has something to do with my network, but can’t figure out the solution.  Any advice? 

Hello everyone and thanks for reading.I had a Symfonisk bookshelf and always had problem using it under wifi because my router can’t handle very well traffic from one band to another (I have the 2.4Ghz and 5Ghz network separated and when I try to airplay from a device on 5Ghz network it won't work, but works better when the device is on the 2.4Ghz as the speaker). I managed to fix it by wiring the speaker to the router with the ethernet cable and everything works flawlessly. Now I’ve bought another Symfonisk speaker to be used in the kid’s room, and I want to add it to the SonosNet created by the first Symfonisk unit. I can see that the first speaker is on that network because in the About my system is reported as wm0.The problem is that when I try to add the second speaker it prompt me to add the wifi credential, and after the process is complete the speaker use that network instead of the SonosNet (in the about section is reported as wm1). I’ve tried several times, I’ve waited all ni

Hi there,I have a stereo pair of Play:5’s in the living room and one is making a strange tonal sound every so often.There isn’t an Alexa style device connected and it’s driving me mad.Any thoughts on how to fix it?

Until recently I could use my iPhone to watch a Youtube video and play the audio on my Sonos One Now the Sonos One does not appear as a device to send sound to.Is there a workaround?Sonos say to use Youtube Music - this defeats the object as I want to watch a video.PS. I have a YouTube Premium account.

This happens on a weekly basis where one side will drop but on a bi-weekly basis, the right speaker will disconnect and make it impossible to pair with the left. Since November 2020, I have had to do a factory reset almost every few weeks and reconnect in order to pair the two speakers. Super annoyed and prepared to switch systems if this does not get resolved.

This would be the fourth time that I am completely reinstalling my system. I have two Sonos Ones, and a subwoofer. It seems that whenever the app updates, or in this instance where I got a new phone… My entire world transfers over to the New phone, but for whatever reason my Sonos network and system is completely disappeared from the app. This is the fourth time this is happened. I’ve gone through all of the troubleshooting steps, I’ve reset my networks, then all that, this has become incredibly frustrating. Does anybody have any suggestions as to the reason for this occurrence?

When I play music on all of the speakers attached to my stereo system, there is a brief delay (a couple of beats) as between the sound that comes out of my (wireless) Sonos speakers and my (wire-connected) Advent speakers.  Other than replacing the Advents with another pair of Sonos speakers, does anyone have any suggestions on how to cure the problem, i.e. get all speakers synched up for simultaneous sound? Thanks in advance for any responses, John 

Hi, I have been trying to update my sonos for the last couple hours after re plugging it in over the weekend and not being able to use it. Originally the error code was 1101 so we did what they said; unplugged it all re plugged it back in still same error code, we tried unplugging main router and nothing we even tried on a different phone still nothing. Then today i decided to try again, new error code 1013. its plugged directly into the router and occasionally i click try again in hopes it will suddenly work to get a new error code like error code 30 or 1002. This is ridiculous and after plugging and unplugging and sitting on top of the router with the speaker and my phone and i still can not get it to update i need another solution? Thanks btw its a sonos play:1

Bonjour sur mon système sonos une de mes enceintes play 1 fait de la distortion sur les bassesMerci de votre aide