How can I connect Sonos Play:5 Gen2 and Play:1 speakers to Pioneer PLX1000 or Stanton STR8 150 MK2 turntables as an addition to my speakers setup?
Do I need a particular cable that connects from RANE TTM 57SL or ECLER NUO 2.0 mixer straight to the Sonos or from DENON AV to the Sonos?
Best answer by Airgetlam
Whichever device is generating your line in signal would be connected to the the line in on the PLAY:5, which turns out to be a 3.5mm jack, so you may need an RCA to 3.5mm cable. Once you’ve installed that cable, the option for the line in should show up in the controller.
Note that all analog line ins on Sonos are subject to a 75ms delay, so while your PLAY;5 and your PLAY:1, and any other grouped Sonos devices will be in sync, any other speakers you’re including (from the Denon?) will be slightly ahead of your Sonos.
Whichever device is generating your line in signal would be connected to the the line in on the PLAY:5, which turns out to be a 3.5mm jack, so you may need an RCA to 3.5mm cable. Once you’ve installed that cable, the option for the line in should show up in the controller.
Note that all analog line ins on Sonos are subject to a 75ms delay, so while your PLAY;5 and your PLAY:1, and any other grouped Sonos devices will be in sync, any other speakers you’re including (from the Denon?) will be slightly ahead of your Sonos.
Is there any way to stream the music generated from a turntable wirelessly to Sonos Play:1 speakers that are located in different rooms around the house ??
Is there any way to stream the music generated from a turntable wirelessly to Sonos Play:1 speakers that are located in different rooms around the house ??
Only with this turntable:
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.