Since the app updates I cannot connect my Play5 gen 1 to either the S1 or SONOS app. I have a mixed system with older speakers and newer ARC and Sub woofer. The other speakers are in other rooms. The 5 is the only one that gets momentarily seen in the S1 app and it automaticallty switches to the 5GZ SONOS app and doesnt appear there either.
Question
Play5 not connecting to S1 or Sonos app
What is a 5GZ Sonos App?
There are just two official Sonos apps, Sonos S1 Controller and Sonos app (used to be called S2) but they dropped that name.
The Gen 1 Play 5 can't connect to the new Sonos app, they are not compatible.
Aside from that what happens if you u plug your other Sonos so it is just the Play 5?
While,you have the others unplugged try a temporary Ethernet cable to the P.ay 5 and see what happens.
Hi and thanks for replying
I meant the SONOS app (S2) runs on the 5 GHz part of my home network vs the 2.4 Ghz part, and the older speakers like the Play5 only worked on the original S1 app at 2.4 Ghz.. Now they (Play1s and 3s) all automatically migrated to SONOS when I opened S1, except for the Play5, And S1 gets overridden by S2 when launched.
From your note “Aside from that what happens if you u plug your other Sonos so it is just the Play 5?”
do you mean unplugging all other speakers and then try the Play5 by itself?
Will try that if so.
Also will try the ethernet cable suggestion.
Thanks, Phil
Hi and thanks for replying
I meant the SONOS app (S2) runs on the 5 GHz part of my home network vs the 2.4 Ghz part, and the older speakers like the Play5 only worked on the original S1 app at 2.4 Ghz.. Now they (Play1s and 3s) all automatically migrated to SONOS when I opened S1, except for the Play5, And S1 gets overridden by S2 when launched.
From your note “Aside from that what happens if you u plug your other Sonos so it is just the Play 5?”
do you mean unplugging all other speakers and then try the Play5 by itself?
Will try that if so.
Also will try the ethernet cable suggestion.
Thanks, Phil
Since all your devices except the Play 5 were updated to S2, they should appear in the SONOS app, and the Play 5 (only) should show up in the SONOS S1 app. Two separate apps.
And S1 gets overridden by S2 when launched.
Can you explain what you mean by this? The two apps should both work without interfering with each other.
S2 runs on both 2.4 and 5 gHz.
S1 and S2 can't see each other, there is no overriding going on.
If the speaker supports both bands it decides where the signal is best and connects there.
If you have Ethernet connected you will get Sonosnet, that is only 2.4 gHz and an older standard. You probably do not want it.
Yes just try the Play 5 Gen 1 all alone with only the S1 controller active.
“And S1 gets overridden by S2 when launched.
Can you explain what you mean by this? The two apps should both work without interfering with each other.”
When S1 is launched and detects the older speakers, such as the play5, it automatically launches S2. The older speakers minus the Play5 show up, and only if my network is on 2.4 gHz.
“Yes just try the Play 5 Gen 1 all alone with only the S1 controller active.” Still haven’t tried that. Will let you know the result.
Read something about Play5 gen1 that makes it an outlier in this S1/S2 issue.
Thanks!
+18“Read something about Play5 gen1 that makes it an outlier in this S1/S2 issue.”
Insofar that the Play 5 ( Gen 1) is S1 only, so not S2 capable.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.