Skip to main content
Contributor III
Dec 29, 2014 1:43 PM UTC

Stereo Play 5s vs Play 1 pair with sub

Moving to another apartment and selling my old stereo equipment I now have spare 2 x play 1 and 1 x play 5 on hands that were before used for different rooms. Due to convenience factor I would like to move one of these to my main listening area but i still question which way to go. Either i add another Play 5 or purchase a Sub to go with Play 1s. Having small kids my listening volume is normally quite low.

Reading this forum some suggest that the sound from play 5s would give me fuller sound but bass from the Sub would be much better, while others seem to think play 1s do sound better on their own when Sub comes into the picture. I understand the decision would always be subjective but would still like to hear some advice.

Thanks
Tomaz
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    59 replies

    Thunderbyte
    Prominent Collaborator I
    Jan 5, 2015 12:54 PM UTC
    which means i would need to purchase zone 3 totaly from scratch.

    The cheapest way to add a zone is always a Play1.

    This complicates things since now i have a connect amp + speakers option also available 🙂. For 600 EUR/$ difference i suppose i could quite improve play 1s + sub combo, am i right?


    Would you like to add the Connect Amp + speakers to the Play1 + Sub? This would only be possible in a "grouped" setup. You won't be able to have 5.1, yet you could have a nice 4 speaker setup with music coming from everywhere in that room. I have that right now in my living room and it is amazing.

    In addition however i do also need new "sound" for my TV which is in the same room so adding a playbar to play 1s with sub would be much more elegant (and better sounding?) than connect amp + speakers and seperate 5.1 system (or soundbar) in addition.


    That is not the only / the right option. As the Playbar has some shortcomings (no DTS support, only 1 input, ...) it is a nice, but not the only possibility for a serious home theatre setup. For the price of a Soundbar, a Sub and 2xPlay1 you can get a VERY nice 7.1 receiver AND a 7.1 (or 5.1) speaker set. OK, you would need to cable all those speakers around the room, but you would have a perfect home theater setup with DTS and HDMI (up to 4k) switching support. You certainly could even add a Sonos Connect (not an AMP) and integrate that 7.1 system into your Sonos network. The only caveat is that the receiver needs to be on for Sonos sound (obviously).
    Translate
    1 Playbar | 1 Sub | 2x Play:5 | 1x Play:3 | 2x Play:1 | 1x Sonos One
    tomaztwoAuthor
    Contributor III
    Jan 5, 2015 2:32 PM UTC

    Would you like to add the Connect Amp + speakers to the Play1 + Sub?


    No. Since i will use existing Play speakers elswhere
    i can either do Play 1s + sub combo OR Connect AMP with speakers in my main room, all of which i would still need to purchase. (+ a soundbar in the same room in the near future for TV, but this is secondary as my main concern at the moment is music)
    Translate
    Jan 5, 2015 2:40 PM UTC

    i can either do Play 1s + sub combo OR Connect AMP with speakers in my main room, all of which i would still need to purchase. (+ a soundbar in the same room in the near future for TV, but this is secondary as my main concern at the moment is music)

    I recommend the 1 pair + Sub. With the Connect Amp, since the 55 wpc can be a limitation for speakers that go as deep and loud as Sub, best results are obtained by adding a Sub - the 1 pair + Sub will be the cheaper and more elegant solution. Unless you spend a lot more money on speakers for the Connect Amp, the sound quality will be same with the 1 pair + Sub.
    Translate
    Thunderbyte
    Prominent Collaborator I
    Jan 5, 2015 2:49 PM UTC
    The AMP + speakers would however have inputs, which could be used as a stereo speaker set for the TV right away. The Play1 + Sub combo has none.

    The AMP has a subwoofer out plug, so a sub could be added right away.

    The AMP + speakers combo could be used as rear speakers for a Sonos 5.1 setup at a later time, as is described here: https://ask.sonos.com/sonos/topics/connect_amp_for_surround_channels_from_the_playbar . The AMP needs to be wired however for that to work.

    I agree however, that Play1 + Sub will give better bass than AMP + speakers (without sub).
    Translate
    1 Playbar | 1 Sub | 2x Play:5 | 1x Play:3 | 2x Play:1 | 1x Sonos One
    Jan 5, 2015 2:52 PM UTC
    The AMP + speakers would however have inputs, which could be used as a stereo speaker set for the TV right away. The Play1 + Sub combo has none.


    I don't know PlayBar well - would the play 1+Sub not be an easier fit into a future addition of it for TV? I agree that would be at the cost of nothing for TV right away.
    Translate
    Thunderbyte
    Prominent Collaborator I
    Jan 5, 2015 2:57 PM UTC
    That all depends where tomaztwo wants to go at what time and at what cost.

    All alternatives are not really cheap, some are cheaper than others, some are better upgradeable, all have caveats (e.g. need to cable AMP for surround, Playbar not having DTS, Sub from Sonos or 3rd party). The only thing we can do is work out options. The decision is up to tomaztwo.

    Btw: active 3rd party, cabled subwoofers can be really cost effective. They start at 100€/$ already.
    Translate
    1 Playbar | 1 Sub | 2x Play:5 | 1x Play:3 | 2x Play:1 | 1x Sonos One
    tomaztwoAuthor
    Contributor III
    Jan 5, 2015 6:43 PM UTC
    The AMP + speakers would however have inputs, which could be used as a stereo speaker set for the TV right away. The Play1 + Sub combo has none.


    What inputs? Do you mean on the AMP itself? That would however give me a delay that i know from Play 5, correct? Its not too annoying, but noticeable.
    Translate
    Thunderbyte
    Prominent Collaborator I
    Jan 5, 2015 8:54 PM UTC
    Possibly yes. I have no Amp, so I don't know for sure.
    Translate
    1 Playbar | 1 Sub | 2x Play:5 | 1x Play:3 | 2x Play:1 | 1x Sonos One
    Jan 6, 2015 1:11 AM UTC
    What inputs? Do you mean on the AMP itself? That would however give me a delay that i know from Play 5, correct? Its not too annoying, but noticeable.
    The Connect Amp has line in, the same type as the 5 does. Results are identical with respect to the delay.
    Translate
    Trending Lyricist I
    Jan 6, 2015 5:14 PM UTC



    For the price of a Soundbar, a Sub and 2xPlay1 you can get a VERY nice 7.1 receiver AND a 7.1 (or 5.1) speaker set. You certainly could even add a Sonos Connect (not an AMP) and integrate that 7.1 system into your Sonos network. The only caveat is that the receiver needs to be on for Sonos sound (obviously).

    I have an existing Receiver connected to my TV and a 5.1 speaker setup that I use for TV's and Movies. I also have two Play 1's in the room to play "casual" music.

    I was considering replacing it all with a Playbar and a Sub plus my two existing Play 1's, but the expensive Sonos Connect seems cheap compared. But I still think it is extremely expensive to what it does.
    Translate