Show off your setup or get inspired by others
Recently active
Spent 2k on an arc, 2 surround and the bass and the lag is so bad i have to set it to pcm stereo. Wasre of money time and aggravation!
For a very long time now the Sonos playlists keep disappearing from the My Sonos page so I am unable to play them - when will this issue be fixed?
I’ve had my sonos gear for about a year and had virtually zero problems with the app. Until the last week or two when I’ve had constant issues. System not found, music services not found. A reboot of the phone usually fixes it. Phone is a Galaxy s21. A couple of things changed around that time:I replaced my One rears with Fives and moved the Ones into a bedroom. I got a new wifi 6 router and mesh extender.Today I tried wiring one of the Ones in the bedroom to the router but that doesn’t seem to have improved things. Is this an issue with the latest update or something else? I really don’t want to remove and re-add things because I have a ton of difficulty getting a Trueplay tuning I like.
Purchased a Yamaha turntable and silly me thought it would be just plug and play. It’s a tts303b and I need it to connect to my Sonia Arc which is connected to my LG Tv. Any help please?
So I got a second Roam to enjoy the stereo greatness. Both are online and connected, paired in stereo. Only 1 speaker will play music at a time. If I turn off the speaker that works the other one suddenly works again. When they are both on the working speaker is playing in stereo but the other is silent. I have reset the speakers twice now, reset the router a few times, Uninstaller and reinstalled the app. I am wits end and completely bummed put with all of this. I worked for a bit and was amazing.... now not so much
I renovated my house, And I have 3 big 70"+ TVs, two inside the house, and a Samsung Terrace outside by the pool. For the soccer world cup, any other sports event, or even movie night, I would like to have all TV playing the same video signal at the same time. As for audio, I purchased and will get installed soon Sonos speakers indoor and outdoor (Arc + 2 rear 1SL on the two indoor TVs +1 sub, just 2 outdoor speakers for outdoor TV), so I think I should be able to pick any TV as the main source and get Sonos to play that audio everywhere, but I guess I can leave each Sonos "home theater" play his own audio from the corresponding TV. In the figure below you see my house plan, with the red dots being the location of the 3 TVs. The The bigger dot is where I would like the "main" TV (or main location), in the sense that I would like either to mirror the signal from that main TV to the other 2 TVs, or I would like to use that as the main location in which I have my laptop sending a movie to
I am wondering if anyone has ever tried using both the in-wall and in-ceiling speakers for surround at the same time using an AMP. I am setting up a new room, and am looking into possible doing both to create a sort of rear surround bubble for my Arc + Sub. TruePlay supports those speakers so it could also do the tuning to adjust for having both. I know we can’t do Atmos and that it would just be a 5.1.2 but curious to see how it would actually sound and work as a rear surround. Anyone ever try?
Every time I group another room I get scared that the volume level in the other room is going to be too loud. I think by default when grouping the volume in the additional room should be reduced to 5 or 10. There is no scenario ever when I add a room that it should immediately blast at a loud volume.
HelloI’ve recently bought a QN800A Neo QLED 8K HDR as its got eARC I decided to upgrade my Play bar to a Arc. Its’ linked up to two Sonos 1’s and sounds amazing when using the apps through the TV. It sounds great when gaming too, last night I was looking at reviews and one guy was on about ready player one as a great test of the Arc’s capabilities so I stuck the Blu-ray in my Xbox series X and realised through the app that it was only playing in multichannel ppm 7.1. Then realised that you have to download the Dolby atoms app and set it up that way. Sounded amazing blah blah… Turned the xbox on today to have a blast on Halo and the sound drops out intermittently, while it’s on it sounds fantastic but keeps dropping out. I’ve got it all set up asTV settings:HDMI-eARC Mode (Auto)Digital output Audio Format (Passthrough)Dolby Atmos Compatibility (On) Xbox settings Display 4K UHD 120 HzSpeaker Audio HDMi Dolby Atmos for home theatre. (Additional options Allow passthrough) Any ideas ho
I just swapped out my playbase with an Arc. It sounds great, but I am trying to get it to play Dolby Atmos content. I have a 2017 LG OLED B7 TV that has an ARC output (not eARc). I have found a few streaming sources with Dolby Atmos content, but it will only play through the TV speakers (when switches to internal speaker). Any help would be greatly appreciated.
Is there any benefit at all in accessing Apple Music via the Sonos app, when I can stream directly to my Sonos Speaker from Apple Music?
Hi All. Having played with the new deezer on the Sonia app what do people think about it. It seems to be missing one of the best bits it had before the most streamed albums any idea how we can get this back ?
Currently i have a sub, 2 play one’s and a playbar setup as my home cinema surround setWill it have any added value to replace the playbar with a ray…. Or would this be downgrading? Thanks upfront for your advice
The Sonos App displays an album in the wrong order. iTunes displays the album in the correct order. I have deleted the album and reinstalled into iTunes library with the same results. Help appreciated.
Apologies if this has been answered before, but many of the threads I’ve found are questions regarding third-party amps or speakers. I recently purchased an Arc. I’d like to connect my turntable (Audio-Technica AT-LP60X, with built in pre-amp) via the Port. Will this “work” with a Sonos Sub in the same room?Just trying to listen to some LP’s. Thanks in advance for any help.
I was going to buy another two speakers today. I put them in my cart and it indicated that I would get a 20% discount. I then realized that I qualified for a 15% upgrade discount. I removed the two speakers from my cart, select two of my existing speakers to upgrade, and returned to add the two speakers I wanted to purchase to my cart. To my surprise I was only credited with a 15% discount, not a 15% discount on the price that had been discounted by 20%. I still wanted the speakers so I figured that I would be able to choose the 20% discount instead of the 15% upgrade discount. No such luck! There is now no way to remove the 15% discount and return to the 20% discount. My attempt to save some money would actually cost me 5% and use up two of my upgrades. I will not be buying any Sonos speakers today.
Hi all. I can't believe I'm the only one frustrated that I can't choose the timing of the timer programming that controls when playback stops. 1 hour or 2 hours....why not 1h40...? especially for the evening. A timer like on a telephone would be so much more flexible to use...Is that really too much to ask of SONOS...? I really don't understand how this could have gone on for so long....I'm counting on the most seasoned to send the request back to the appropriate services. THANK YOU in advance for all of us.
I recently bought a new Samsung QN95B smart TV. I have connected it to my S11 Sonos playbase with the optical cable. I am trying to get the volume on the playbase to work with the new Samsung remote. I’m having no luck. The playbase volume does not seem to work with the Samsung remote. I can only operate sonos volume via sonos app on my phone. Any ideas on how to get Samsung remote to operate volume on sonos playbase?
Hi folks, Happy Sonos user for a few years now. I wanted to give Sonos Radio HD a try a few days ago, and it seems like it’s not available in Israel..Is there an ETA for availability in Israel / roadmap for other countries? I think the app should have prevented me from starting the trial provided it’s not supported in my country, or at least indicated that to me before proceeding. It took me a few support calls to understand that this is the issue..Thanks!
I ordered a Beam (Gen 2) from Sonos Australia on 30 April. Sonos cancelled the order with no explanation given. I called to enquire and was advised that the order was lost due a change in their IT systems. The order was placed again (and a discount given which was nice) and was received on 26 May. Unfortunately it was faulty (didn’t work) so I arranged return. It was received by Sonos on 2 June and they advised that a replacement "should arrive in 1-5 working days". It is now 14 June, and repeated attempts to contact Sonos online and by phone have been unsuccessful. I’ve been on hold on the online ‘Chat With Us’ and on the phone to the call centre for two hours today, but no one is picking up. Anyone else having similar issues contacting Sonos? Should I take this to NSW Fair Trading?
I have 2 connect amps wired to episode outdoor speakers (ES-500-ew-4). I have had 6 speakers blow in the matter of 3 months. Is this an amp issue or a speaker issue?
Hello Team: I know I should look for this anser - but I cannot find it. Here is whjat I have and what I am trying to do. Samsung Q LED TV w/ ONE HDMI ARC portDenon AV receiverSonos AMPUse case: I want to have the TV audio currently set up via my AV receiver (NOT touching SONOS at all) as an audio source for Sonos. I see that there is an HDMI port on the back of the AMP. However, there is only ONE HDMI ARC port on the TV which is currently connected to my AV receiver. Am i able to get a splitter such that the TV audio goes properly to my AV system (NON SONOS) and ALSO as a source from AMP. I want to listen to tv audio on my deck which speakers are powered by the AMP. Comments and suggestions please (aside from RTFM!) Thanks
I was wondering if someone can help me with an answer I can’t find. I am installing 12 Sonos ports in my home because I have a pre-existing setup with amp and what not. All my amps are sonance amps, so my question is will the Sonos amp control the volume of my amp? I know there is an option for passthrough on the port, but there is not list that I can find that tell me what amps work for volume control on the port.any help would be greatly appreciated.
Currently I have a Bridge and 2 Connects powering 2 different amps directly (wired), one is located downstairs and the other upstairs. Often I group them together to play the same music throughout the house. This has always worked great.To upgrade it seems that I should purchase 2 Ports (doing away with all 3 prior components). My question is can I use my existing wifi for each Port and still group them together without latency or do I need to connect one Port to my modem (over ethernet) and the first amp and set up a Sonos wireless network for the other Port to use and connect it to my second amp? Or is either solution viable?Thanks
Hi, is it possible to connect a turntable with a preamp included to a sonos connect 2nd gen, so I can play wirelessly through my sonos speakers.many thanks
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.