Skip to main content
Contributor I
Jan 4, 2023 11:20 AM UTC
Answered

Sonos Roam keeps disconnecting while playing

We use our Roam to play white noise in our daughters room. The speaker is set up in her room on the wireless charger. Previously it always worked fine, and then now it randomly just drops out and appears as “not connected” in the Sonos app. It’ll play for an hour or so, and then it disappears. 
 

Hard rebooting the speaker via the button on the back returns it to the app and makes it usable again, but it’ll play for another hour or so and then randomly stop and disappear. 
 

For reference: my home sonos system runs on Sonosnet channel 6

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Jan 4, 2023 1:39 PM UTC

The Roam does not use SonosNet, as you perhaps may be aware. Do you have your router WiFi 2.4Ghz and 5Ghz bands using separate SSID’s? - if so, then ensure the Roam is put onto the 2.4Ghz band and set the channel to either 1 or 11 (non-overlapping) and if the router allows, also set a channel-width of 20Mhz only and see if that improves the connection to the Roam.

If the SSID/credentials for the 2.4/5Ghz WiFi bands are the same, and cannot be easily separated, then check your router user-manual to see if you can perhaps manually steer the Roam onto the 2.4Ghz band, via the router configuration pages.

100 replies

Ken_Griffiths
Oct 14, 2023 7:11 PM UTC

The problem is back. After a few days the defective Roam has disconnected again.

The Roam is again showing as ‘Not Connected’

Sorry to hear that, also sorry because I do have a few questions to ask you, notwithstanding that there maybe a hardware issue…

  • What is the make/model of your router?
  • Is the router firmware up to date?
  • Which band and WiFi channels & channel-width were in use by the Roam when all was working okay?
  • Have, or are, you able to fix the channels and channel-width for your routers WiFi combined bands?
  • What is the IP address ‘lease time’ in your routers DHCP settings?
  • What power-saving settings are you using for the Roam in its room settings in ‘Settings/System/[Roam Name]’?
Translate
Lyricist III
Oct 16, 2023 1:06 PM UTC

Hi Ken,

Here is the information you requested:

  • Zyxel USG Flex 200
  • Yes is up to date
  • 5 GHz band Channel 161 Signal Strength 58dbm 
  • Yes. I can fix channels
  • Lease time is 2 days but this unit has a reserved static address
  • Both Battery Save and WiFi Power Save are selected

 

Translate
Ken_Griffiths
Oct 16, 2023 3:01 PM UTC

Hi Ken,

Here is the information you requested:

  • Zyxel USG Flex 200
  • Yes is up to date
  • 5 GHz band Channel 161 Signal Strength 58dbm 
  • Yes. I can fix channels
  • Lease time is 2 days but this unit has a reserved static address
  • Both Battery Save and WiFi Power Save are selected

looking at the router user-manual, maybe consider splitting the WiFi bands on your router and try the Roam just on the 2.4Ghz band (rename the 5Ghz band SSID by adding ‘-5G’ (or similar) to its SSID) - Use a fixed non-overlapping channel 1, 6 or 11 and a channel-width of 20Mhz only for the 2.4Ghz band - I would also see if things work better without QoS enabled.

Also try the Roam with its WiFi Power Saving setting set to disabled. 

Hope that works for you.

Translate
Lyricist III
Oct 16, 2023 3:56 PM UTC

I don’t understand why splitting the band would help when all of my other Sonos products, including the other Roam that doesn’t have any issues. Plus, splitting the band would affect my entire wireless network and all of the devices that use that SSID. BTW, I do appreciate the screenshots. Thank you for that addition to help explain what needs to be done.

Turning off the WIFI Power Saving makes sense to me since it seems my other Roam does not have that feature on and it doesn’t have this problem.

I will turn off WiFi Power Saving and keep you posted.

Translate
Lyricist III
Oct 17, 2023 1:32 PM UTC

Even with WiFi Power Saving mode off, the defective Roam continues to disconnect from Sonos.

From your earlier post, QOS is not enabled.

Any other suggestions would be appreciated.

Translate
Ken_Griffiths
Oct 17, 2023 1:59 PM UTC

Even with WiFi Power Saving mode off, the defective Roam continues to disconnect from Sonos.

From your earlier post, QOS is not enabled.

Any other suggestions would be appreciated.

Is the Roam actually dropping its IP address and/or shutting down completely, with no status LED showing when it goes offline? Or is it simply going into ‘sleep’ mode, where you can wake it with the press of the power button - or is it in ‘standby’ and still ready to play with its status LED showing, can you just clarify what you are seeing.

Translate
Lyricist III
Oct 20, 2023 2:33 PM UTC

The Roam is actually dropping its IP address. It does not shut down or go to sleep. It shows a solid white status LED. It stops being available through Sonos direct and Airplay.

After over 3 weeks and over 7 calls to Sonos support, they finally swapped the defective Roam with a replacement

Translate
Lyricist III
Oct 24, 2023 3:07 PM UTC

The replacement unit arrived on Saturday and I haven’t had any disconnection problems yet. If I get past a full week without any disconnections that will be a very good sign. I will keep you posted.

Translate
Lyricist III
Oct 30, 2023 4:15 PM UTC

It has now been 9 days since I connected the replacement unit and I have not had any disconnections.

Sonos support needs to reevaluate what it considers a good, working unit. They consistently blamed my network for the problem even though I tried every solution they offered without a resolution. Honestly, I tried many of their solution more than once. Phone support was persistent in believing the problem was in my network settings and ignored the fact I had another Roam that was working properly. If I wasn’t comfortable with tweaking my network settings and I didn’t have another Roam that did not have the issue, they probably would have intimated me to just give up and assume my network couldn’t handle this Sonos Roam. That would have created an unhappy customer for simple reason they were to stubborn to think the problem was with the Roam.

Thank you to everyone who offered suggestions to try to fix the problem.

 

Translate
Lyricist III
Oct 30, 2023 8:08 PM UTC

I would like to add that once Support agreed to swap my defective unit for a replacement unit, the process was very quick and simple. They quickly sent me a replacement unit that arrived in a few days. They also emailed me a prepaid return postage label and then notified me when they received the defective unit.

Is was a straightforward, quick and easy process. I only wish it was easier to get to that point.

Translate