Skip to main content
Contributor I
Jan 4, 2023 11:20 AM UTC
Answered

Sonos Roam keeps disconnecting while playing

We use our Roam to play white noise in our daughters room. The speaker is set up in her room on the wireless charger. Previously it always worked fine, and then now it randomly just drops out and appears as “not connected” in the Sonos app. It’ll play for an hour or so, and then it disappears. 
 

Hard rebooting the speaker via the button on the back returns it to the app and makes it usable again, but it’ll play for another hour or so and then randomly stop and disappear. 
 

For reference: my home sonos system runs on Sonosnet channel 6

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Jan 4, 2023 1:39 PM UTC

The Roam does not use SonosNet, as you perhaps may be aware. Do you have your router WiFi 2.4Ghz and 5Ghz bands using separate SSID’s? - if so, then ensure the Roam is put onto the 2.4Ghz band and set the channel to either 1 or 11 (non-overlapping) and if the router allows, also set a channel-width of 20Mhz only and see if that improves the connection to the Roam.

If the SSID/credentials for the 2.4/5Ghz WiFi bands are the same, and cannot be easily separated, then check your router user-manual to see if you can perhaps manually steer the Roam onto the 2.4Ghz band, via the router configuration pages.

100 replies

Lyricist III
Oct 10, 2023 3:39 AM UTC

The Roam does not use SonosNet, as you perhaps may be aware. Do you have your router WiFi 2.4Ghz and 5Ghz bands using separate SSID’s? - if so, then ensure the Roam is put onto the 2.4Ghz band and set the channel to either 1 or 11 (non-overlapping) and if the router allows, also set a channel-width of 20Mhz only and see if that improves the connection to the Roam.

If the SSID/credentials for the 2.4/5Ghz WiFi bands are the same, and cannot be easily separated, then check your router user-manual to see if you can perhaps manually steer the Roam onto the 2.4Ghz band, via the router configuration pages.

I do not see why this is highlighted as the “answer”. It may work in some cases but it does not help in my case and the many other people who have posted on this site.

I have 2 Roams, a 1st Gen One and a Connect.

One of my Roams and both of the other Sonos units work fine and never have this problem. The other Roam disconnects constantly and seems to be getting worse every time I speak with Support.  Sonos support has been giving me the run around for over 2 weeks now and cannot explain why one Roam works fine and the other disconnects every few hours. Same WIFI, one works, one doesn’t. 

Translate
Airgetlam
Oct 10, 2023 3:51 AM UTC

Could easily be a duplicate IP address issue, affecting one or more separate speakers, without affecting all of them. Depends on which IP addresses are duplicated. 

Translate
Bruce
Lyricist III
Oct 10, 2023 4:01 AM UTC

The reason the Roam (or Sonos Move) does not use ‘SonosNet’ & Spanning Tree Protocol is the fact the device is "portable" - anyone walking around the Home with one in hand, would cause the mesh network to continually make/break the connections between devices and cause interruption to any playing audio across one or more players.. 

Anyhow, that aside, I would also double-check in your case if the Roam is connected to the wireless LAN with an assigned IP address from the local router and just see if it actually is simply not showing up in your Sonos controller App. If it is connected, but not showing, it may not actually be the Roam - it could be an SSDP multicast ‘discovery’ issue across the different segments of your wired/wireless mesh network instead… there are plenty of things that may cause that issue. Perhaps as a quick test, you could switch all the mesh hubs to “Bridged AP" mode to a different brand of router (maybe even one provided by your ISP) and just see if that solves the multicast issue.

 

In my case, the defective Roam stops appearing on my router as connected. After I restart it, it reconnects.

Does this mean there is a problem with the Roam?

Translate
Ken_Griffiths
Oct 10, 2023 9:57 AM UTC

 

In my case, the defective Roam stops appearing on my router as connected. After I restart it, it reconnects.

Does this mean there is a problem with the Roam?

I see you mentioned the other Roam was running on the same WiFi, but what band is the Roam using that keeps disconnecting and what channels and channel-width are you using? Of course any device may have a fault, but maybe try to eliminate some of the obvious things first. You mentioned the device was dropping its IP address - maybe give it a reserved address in your routers DHCP table and just see if that improves things. 
Note the routers 2.4ghz band is far reaching and more penetrable than the 5Ghz band, so ensure it uses that band and set its channel to 1, 6 or 11 (non-overlapping) with a channel-width of 20Mhz and just see if that sorts things for you.

Translate
Lyricist III
Oct 10, 2023 12:51 PM UTC

 

In my case, the defective Roam stops appearing on my router as connected. After I restart it, it reconnects.

Does this mean there is a problem with the Roam?

I see you mentioned the other Roam was running on the same WiFi, but what band is the Roam using that keeps disconnecting and what channels and channel-width are you using? Of course any device may have a fault, but maybe try to eliminate some of the obvious things first. You mentioned the device was dropping its IP address - maybe give it a reserved address in your routers DHCP table and just see if that improves things. 
Note the routers 2.4ghz band is far reaching and more penetrable than the 5Ghz band, so ensure it uses that band and set its channel to 1, 6 or 11 (non-overlapping) with a channel-width of 20Mhz and just see if that sorts things for you.

 

I reserved an IP address in my router for the Roam that keeps dropping off the network

My WIFI uses both the 2.4Ghz and 5Ghz bands and the best band is determined by the device. 

Both Roams are on the same network and both are using channel 161 on the 5Ghz band.

The one that drops off is currently at a signal strength of -59 dBm and one that doesn’t have a problem is at -69dBm

Translate
Ken_Griffiths
Oct 10, 2023 2:47 PM UTC

I reserved an IP address in my router for the Roam that keeps dropping off the network

My WIFI uses both the 2.4Ghz and 5Ghz bands and the best band is determined by the device. 

Both Roams are on the same network and both are using channel 161 on the 5Ghz band.

The one that drops off is currently at a signal strength of -59 dBm and one that doesn’t have a problem is at -69dBm

If the issue persists then it maybe best to submit a Sonos system diagnostic report from within the Sonos App, note it’s reference and then contact/chat with Sonos Support Staff via this LINK  and see what the Staff can perhaps suggest to resolve the matter.

Hope you get it sorted.👍

Translate
Lyricist III
Oct 10, 2023 3:07 PM UTC

If the issue persists then it maybe best to submit a Sonos system diagnostic report from within the Sonos App, note it’s reference and then contact/chat with Sonos Support Staff via this LINK  and see what the Staff can perhaps suggest to resolve the matter.

Hope you get it sorted.👍

I have been submitting system diagnostics to Sonos from the app and I have spoke to support over 6 times in the last 2 weeks. They never recommended setting a reserved IP address for the Roam but they did have me try many other things. It’s been over 3 hours of phone support with no help from them. Hopefully your suggestion will work. It’s been a few hours and the troubled Roam is still connected. The big tests will be if it last over 24 hours and then over a week. I don’t think its ever stayed connected for a week.

Thanks for you assistance. I will keep this thread updated.

Translate
buzz
Grand Maestro
Oct 10, 2023 3:25 PM UTC

Reserve IP addresses for all SONOS units. I reserve addresses for all regular house clients. There is no point reserving for guests. For most routers this is a time consuming, boring task, but it does not need to be repeated until you replace the router. Minor updates are recommended as you add clients — especially after adding a SONOS unit. It’s not critical to delete entries belonging to removed clients.

Translate
Lyricist III
Oct 11, 2023 12:54 PM UTC

It has been over 24 hours and the troubled Roam has not dropped off of the network.

Hopefully reserving the IP address was the fix I needed.

Translate
Lyricist III
Oct 14, 2023 5:14 PM UTC

The problem is back. After a few days the defective Roam has disconnected again.

The Roam is again showing as ‘Not Connected’

Translate