Skip to main content
Contributor I
Jan 4, 2023 11:20 AM UTC
Answered

Sonos Roam keeps disconnecting while playing

We use our Roam to play white noise in our daughters room. The speaker is set up in her room on the wireless charger. Previously it always worked fine, and then now it randomly just drops out and appears as “not connected” in the Sonos app. It’ll play for an hour or so, and then it disappears. 
 

Hard rebooting the speaker via the button on the back returns it to the app and makes it usable again, but it’ll play for another hour or so and then randomly stop and disappear. 
 

For reference: my home sonos system runs on Sonosnet channel 6

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Jan 4, 2023 1:39 PM UTC

The Roam does not use SonosNet, as you perhaps may be aware. Do you have your router WiFi 2.4Ghz and 5Ghz bands using separate SSID’s? - if so, then ensure the Roam is put onto the 2.4Ghz band and set the channel to either 1 or 11 (non-overlapping) and if the router allows, also set a channel-width of 20Mhz only and see if that improves the connection to the Roam.

If the SSID/credentials for the 2.4/5Ghz WiFi bands are the same, and cannot be easily separated, then check your router user-manual to see if you can perhaps manually steer the Roam onto the 2.4Ghz band, via the router configuration pages.

100 replies

Contributor I
Jan 6, 2024 1:49 PM UTC

Hello there

 

I am a brand new Sonos customer, I received 2 Era-100 and a Roam for Christmas. 
 

The Era-100s have been great, but the Roam is the biggest piece of Chinese garbage I’ve ever used in my entire life. 
 

Our house has fantastic prosumer grade WiFi and signal is so strong I can connect to WiFi half way down my street. 
 

With the Roam, every night I put it on 10 hours of rain falling etc. on Spotify and every single morning, the Roam is dead silent and completely unreachable by the system. There is a red dot in the app indicating it’s offline. Trying to do the repair process fails, says it can’t find the device. Only fix is to manually reboot this piece of absolute junk as it’s not even capable of reestablishing its WiFi connection. 
 

The unit is plugged into the wall adapter and has never dipped below 100%

 

My only solace in this is knowing I’m within my return period as it was a Christmas gift.  I am calling for a refund first thing Monday, I’ve had enough of this.

 

Sonos this is an embarrassment and a pathetic product that should not be for sale. What a disgrace. 

Translate
Contributor I
Jan 6, 2024 1:51 PM UTC

The Roam is actually dropping its IP address. It does not shut down or go to sleep. It shows a solid white status LED. It stops being available through Sonos direct and Airplay.

After over 3 weeks and over 7 calls to Sonos support, they finally swapped the defective Roam with a replacement

This sounds like what’s happening to me. System just goes dead although still powered on with the solid white LEDs, yet is unrecoverable without hard reboot. I’m pushing for a refund or exchange hopefully because this is just horrendous

Translate
Ken_Griffiths
Jan 6, 2024 2:27 PM UTC

The Roam is actually dropping its IP address. It does not shut down or go to sleep. It shows a solid white status LED. It stops being available through Sonos direct and Airplay.

After over 3 weeks and over 7 calls to Sonos support, they finally swapped the defective Roam with a replacement

This sounds like what’s happening to me. System just goes dead although still powered on with the solid white LEDs, yet is unrecoverable without hard reboot. I’m pushing for a refund or exchange hopefully because this is just horrendous

Normally when a Sonos speaker drops, or loses, it’s IP address the top status LED will flash white as it tries to get an IP address, so perhaps lookout for the flashing LED and also try pinging its address over the network.

Check your router too to see if the Roam is actually connected, as it might in fact just be a ‘discovery’ issue by the App.

You could also try it on the ‘other’ WiFi band, as the Roam will operate on either the 2.4Ghz WiFi band or the 5Ghz band. If using the 2.4Ghz band (which is more penetrating and has longer reach) then try it on a fixed non-overlapping channel of either Ch.1, 6 or 11 and set the channel width to 20MHz only as that will reduce any interference and will likely improve its connection.

You could also go onto reserve it’s IP address in your router configuration pages and make its address static, as that may help things too.

Translate
Lyricist III
Mar 12, 2024 3:56 PM UTC

I have 3 Roams. One continues to disconnect while the other two always stay connected. If someone ever finds a fix, please post. I have tried everything people mention in this thread.

Translate
Ken_Griffiths
Mar 12, 2024 4:50 PM UTC

I have 3 Roams. One continues to disconnect while the other two always stay connected. If someone ever finds a fix, please post. I have tried everything people mention in this thread.

Maybe check your router/access points to see which WiFi bands/AP’s each Roam is using, as that may perhaps provide you with some answers.

Translate
Airgetlam
Mar 12, 2024 6:16 PM UTC

There is an S2 update today, to 16.1, which claims in the release notes to affect the Roam’s connection process, you may want to update to see if it helps. 

Translate
Bruce
Lyricist III
Mar 12, 2024 6:46 PM UTC

I have 3 Roams. One continues to disconnect while the other two always stay connected. If someone ever finds a fix, please post. I have tried everything people mention in this thread.

Maybe check your router/access points to see which WiFi bands/AP’s each Roam is using, as that may perhaps provide you with some answers.

Ken, this is a great idea and I did just confirm the faulty one was connected to a different access point so I shut that down to force connection to the same as the other two. I will check back in a week and see if this works.

Translate
Lyricist III
Mar 12, 2024 6:48 PM UTC

There is an S2 update today, to 16.1, which claims in the release notes to affect the Roam’s connection process, you may want to update to see if it helps. 

Mine all run 16.0. Can I push a firmware upgrade to the Roams? I do updates as asked by the Sonos controller SW and I guess I though that handled the firmware.

Translate
Ken_Griffiths
Mar 12, 2024 7:34 PM UTC

There is an S2 update today, to 16.1, which claims in the release notes to affect the Roam’s connection process, you may want to update to see if it helps. 

Mine all run 16.0. Can I push a firmware upgrade to the Roams? I do updates as asked by the Sonos controller SW and I guess I though that handled the firmware.

Once you get the latest Sonos controller App v16.1 installed on your mobile device, just goto the Apps “Settings/System/System Updates" and choose ‘Check for Updates’ and let it install all updates on your powered-on products. If any device(s) are powered off at the time, and/or not connected to the local WiFi, then you can always re-run the update process again later via the App, when the device(s) become available. 

Translate
Lyricist III
Mar 14, 2024 10:15 AM UTC

I have 3 Roams. One continues to disconnect while the other two always stay connected. If someone ever finds a fix, please post. I have tried everything people mention in this thread.

Maybe check your router/access points to see which WiFi bands/AP’s each Roam is using, as that may perhaps provide you with some answers.

Ken, this is a great idea and I did just confirm the faulty one was connected to a different access point so I shut that down to force connection to the same as the other two. I will check back in a week and see if this works.

There is definitely a correlation between between either the access point in my basement, or the Pelton bike or Google Nest Mini Gen 2 conflicting with my one troubled Roam and causing it to disconnect. Just not sure which one or combo is causing the issue. For now, I have unplugged the basement access point and I have maintained connection for over 24 hours on the Roam. The Google Nest Mini Gen 2 is on right now and I will be using the Peloton soon. If I maintain connection to Roam for another 24 hours, then I will have better data.

Translate