Skip to main content
Contributor I
Mar 21, 2023 2:10 AM UTC
Answered

Connecting Roam Speaker to 2 Sonos networks

I own 2 homes with a Sonos system in each home. I have recently purchased a roam speaker and connected it to the Sonos system in 1 home.

  Can I take this same speaker to the second home and connect it to that network without deleting the connection to the network in home number 1?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Mar 24, 2023 9:30 AM UTC

Hi @Ejenkins57 

Welcome to the Sonos Community!

You can take your Roam to the second location and use it on Bluetooth or on WiFi, but it cannot become part of the other Sonos system without being reset. You would then need to reset it again for it to once more be part of the first system.

If you don’t want to reset it, and assuming that the app on your phone “knows” both systems, it might be best to follow these steps:

  1. At home 1, where the Roam currently is, reset the Sonos app and choose “Connect to Existing System”. This will erase the app’s knowledge of the second system.
  2. Take the Roam to home 2, as well as a spare phone/tablet.
  3. The Sonos app is not written to be able to switch between two systems on one WiFi network, so install the Sonos app on the spare phone/tablet and connect it to the existing system at home 2.
  4. Turn on the Roam and open the Sonos app on your (first) phone - it should say that it can’t connect to your system. Tap Fix It and follow the steps on the screen to connect your Roam to the new WiFi.

To be honest, it may be easier to just reset the Roam and add it to whichever system you’re with.

I hope this helps.

 

 

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

25 replies

buzz
Grand Maestro
Mar 21, 2023 2:53 AM UTC

Are the two homes tied to the same SONOS household?

Translate
Contributor I
Mar 22, 2023 9:01 AM UTC

Same Sonos account but different internet wireless network. 

Translate
Corry P
Corry PAnswer
Sonos Staff
Mar 24, 2023 9:30 AM UTC

Hi @Ejenkins57 

Welcome to the Sonos Community!

You can take your Roam to the second location and use it on Bluetooth or on WiFi, but it cannot become part of the other Sonos system without being reset. You would then need to reset it again for it to once more be part of the first system.

If you don’t want to reset it, and assuming that the app on your phone “knows” both systems, it might be best to follow these steps:

  1. At home 1, where the Roam currently is, reset the Sonos app and choose “Connect to Existing System”. This will erase the app’s knowledge of the second system.
  2. Take the Roam to home 2, as well as a spare phone/tablet.
  3. The Sonos app is not written to be able to switch between two systems on one WiFi network, so install the Sonos app on the spare phone/tablet and connect it to the existing system at home 2.
  4. Turn on the Roam and open the Sonos app on your (first) phone - it should say that it can’t connect to your system. Tap Fix It and follow the steps on the screen to connect your Roam to the new WiFi.

To be honest, it may be easier to just reset the Roam and add it to whichever system you’re with.

I hope this helps.

 

 

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Airgetlam
Mar 24, 2023 3:24 PM UTC

The other option would be to set up both Wi-Fi’s with the same SSID and password, and make both Sonos systems the same ‘household’ (which I think it is, based on your post). Then the Roam would just connect to whichever network it was within, and join that ‘system’, since the network account would be the same in both locations. 
 

Translate
Bruce
Lyricist I
Jul 13, 2023 7:22 PM UTC

To be honest, I have never been so frustrated with a product that sounds so good when working properly. 

I am a contractor and work at many residences around my county. Fortunately, many of my clients share with me their wifi networks so that while I am working on their respective residences, I can enjoy higher speeds for things like project management and music listening. 


I can tell you that unfortunately, your products both the Roam and Move do not like actually moving nor roaming. In fact, I could say that at least a dozen of my clients have been turned away from your products when they see me struggling with your products as I’m promising them that I won’t be charging for the time it takes to just listen to some music.

 

It’s apparent that Sonos prefers that we use the Sonos app instead of the music app like Pandora or Spotify. However, that feature is unavailable unless you are connected to wifi. That wouldn’t be a problem for me since I already mentioned I have access to that. However, every time I leave my home network I have to reset my Sonos product to connect to the clients wifi. Sometimes that works, other times it doesn't. Either way it takes time out of an otherwise productive day. 


As for Bluetooth, it's about a 20/80 chance that it's going to work. Most of the time it connects to bluetooth, my music app will show the music playing but no music comes out. The 20% chance it connects to music, my phone will ring or some notification goes off while I'm on a ladder and have my tools, then the music does not turn back on automatically. 

 

Long story short, I’m very frustrated with your products and feel a sense of false advertisement. Your sound quality is second to none, but if you add up all of the hours if not days of frustration with technical difficulties it would have given even a Buddhist monk a near heart attack. 


I look forward to hearing your feedback and appreciate any reimbursement or resolution so I can continue using your products in the future. As we all know, word of mouth is one of the most important aspects of marketing. It’s not good for your company that dozens of my clients have witnessed this frustration first hand. 

 

Cheers,


Frankie

Translate
Corry P
Sonos Staff
Jul 14, 2023 8:30 AM UTC

Hi @fdsalamida 

Thank you for the feedback, and I’m sorry to hear that you have had so many issues with your portable Sonos devices.

I have taken my own Roam to other networks (though not nearly as many as you, by the sound of it) and experienced no issues at all. Likewise, I have had no problems in connecting multiple devices via Bluetooth (admittedly, all Samsung). Also, there are plenty of users frequenting these pages that don’t have any issues, though, to be fair, there are quite a few reporting problems too, but then few people show up here to report that everything is going swimmingly and not to ask for help. As many say, this is like going to a hospital and wondering why everyone is ill.

The reason routers have settings pages at all is because sometimes the need exists to alter settings there to suit the needs of the devices that connect to the network. Therefore it is a little unfair to expect every network you connect to - and have no permission to alter the settings of - to be ideally configured for Sonos operation. We typically make use of networks in ways that other devices do not - talking to other, nearby devices using particular protocols being one.

I cannot offer you reimbursement here, nor could I do so without proof of unsatisfactory performance - I recommend you get in touch with our technical support team who have tools at their disposal that will allow them to give you advice specific to your Sonos system and what it reports.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Jul 14, 2023 8:56 AM UTC

@fdsalamida .  Your post isn’t really relevant to this thread.  The original post is about moving between Sonos systems, not between WiFi networks as a standalone speaker,  The actions needed are completely different in the two cases.

The Rosm and Move can roam (or move) between WiFi networks without a factory reset, but really Bluetooth is the main intended tool when using the speakers away from their home network.  I am not sure why you are having problems getting your speaker onto other networks, but a simple solution would be to connect your phone to the network and use Bluetooth to play on your Sonos speaker. (Again I have had no problems with Bluetooth and I am puzzled by your problems.)

(As the monthly data allowance on my mobile phone is vastly greater than I could ever use, I don’t bother connecting to WiFi in other locations anyway, even when it’s available.)

The Roam roams fine, and the Move moves great.  Contacting Sonos Support sounds like the best option

Translate
melvimbe
Jul 14, 2023 12:49 PM UTC

I agree with John.  Using bluetooth seems to be the best course of action for your case, rather than connecting the speaker to  WiFi at each job location. Connecting to bluetooth should be pretty straight forward, but perhaps you are not getting the Roam in bluetooth mode, or your phone is trying to connect to a different audio device (headphones for example).

 

Translate
Danny
Lyricist III
Mar 22, 2024 11:48 AM UTC

Hi @Ejenkins57 

Welcome to the Sonos Community!

You can take your Roam to the second location and use it on Bluetooth or on WiFi, but it cannot become part of the other Sonos system without being reset. You would then need to reset it again for it to once more be part of the first system.

If you don’t want to reset it, and assuming that the app on your phone “knows” both systems, it might be best to follow these steps:

  1. At home 1, where the Roam currently is, reset the Sonos app and choose “Connect to Existing System”. This will erase the app’s knowledge of the second system.
  2. Take the Roam to home 2, as well as a spare phone/tablet.
  3. The Sonos app is not written to be able to switch between two systems on one WiFi network, so install the Sonos app on the spare phone/tablet and connect it to the existing system at home 2.
  4. Turn on the Roam and open the Sonos app on your (first) phone - it should say that it can’t connect to your system. Tap Fix It and follow the steps on the screen to connect your Roam to the new WiFi.

To be honest, it may be easier to just reset the Roam and add it to whichever system you’re with.

I hope this helps.

 

 

Hi Corry,

You indicate here that you can take the Roam to the second location and use it on WiFi, but it can’t be part of that system.  My question is… how do I connect it to the second WiFi without it becoming part of that system?

 

I have 2 Roam’s at work, and 2 Era 100s at home.  Occasionally I want to take my Roams home and airplay them together with the Era 100s.  But when I open the app at home, it doesn’t find the Roams.

 

Bluetooth is not the best option here, because I can’t play all at the same time.  I just want to connect them all to the same network so I can airplay them all at once with some surround sound… but why won’t it find the Roams and how can I force it to without resetting every time?

 

Thanks for your help.

 

Translate
Corry P
Sonos Staff
Mar 22, 2024 12:13 PM UTC

Hi @beholder 

As mentioned in my post that you quoted, you will need to use an instance of the Sonos app that is not aware of the Era-equipped home system - only that way will you be able to get to the stage of setting the Roams up on a new WiFi network without the other system interfering with the app. If you only have one device upon which you can run the Sonos app, you will need to reset the app and turn off the Era’s in order to get the app to the point where you can connect the Roams to the home WiFi. Honestly, it would be much easier to have a separate controller device. This is all outside of normal operating parameters, so there are no set instructions or methods - I’m just trying to think of what might work, but without actually being able to try it.

Once you get the Roams onto your home WiFi, they needn’t be a part of the same system as the Eras in order for AirPlay to play to all the speakers - they just need to be on the same network. However, if you are the only person at your work who uses the Roams, it might just be easier to reset them both, join them on to your home system, and then take them to work when needed without resetting them again (you will need to setup your work WiFi again, though). Your Sonos “Household” (system) will then be split across the two locations. The next time you take the Roams home, that’s literally all you would need to do - once home, they would automatically re-join your home system. Note that having a system split across two locations can cause issues with cloud-based Voice Assistants (Alexa and Google Assistant), but as long as no room names are duplicated, it’ll probably be okay. Please also note that if you reset both Roams, they will lose any configuration, favourites and Sonos playlists (though when you add them to your home system, they will import all these from that system).

Again, this is not a supported way of doing things, so I can’t promise any of this will work, but I suspect it will.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein