Skip to main content
Contributor I
Mar 21, 2023 2:10 AM UTC
Answered

Connecting Roam Speaker to 2 Sonos networks

I own 2 homes with a Sonos system in each home. I have recently purchased a roam speaker and connected it to the Sonos system in 1 home.

  Can I take this same speaker to the second home and connect it to that network without deleting the connection to the network in home number 1?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Mar 24, 2023 9:30 AM UTC

Hi @Ejenkins57 

Welcome to the Sonos Community!

You can take your Roam to the second location and use it on Bluetooth or on WiFi, but it cannot become part of the other Sonos system without being reset. You would then need to reset it again for it to once more be part of the first system.

If you don’t want to reset it, and assuming that the app on your phone “knows” both systems, it might be best to follow these steps:

  1. At home 1, where the Roam currently is, reset the Sonos app and choose “Connect to Existing System”. This will erase the app’s knowledge of the second system.
  2. Take the Roam to home 2, as well as a spare phone/tablet.
  3. The Sonos app is not written to be able to switch between two systems on one WiFi network, so install the Sonos app on the spare phone/tablet and connect it to the existing system at home 2.
  4. Turn on the Roam and open the Sonos app on your (first) phone - it should say that it can’t connect to your system. Tap Fix It and follow the steps on the screen to connect your Roam to the new WiFi.

To be honest, it may be easier to just reset the Roam and add it to whichever system you’re with.

I hope this helps.

 

 

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

25 replies

Lyricist III
Mar 23, 2024 3:46 PM UTC

Hi @beholder 

As mentioned in my post that you quoted, you will need to use an instance of the Sonos app that is not aware of the Era-equipped home system - only that way will you be able to get to the stage of setting the Roams up on a new WiFi network without the other system interfering with the app. If you only have one device upon which you can run the Sonos app, you will need to reset the app and turn off the Era’s in order to get the app to the point where you can connect the Roams to the home WiFi. Honestly, it would be much easier to have a separate controller device. This is all outside of normal operating parameters, so there are no set instructions or methods - I’m just trying to think of what might work, but without actually being able to try it.

Once you get the Roams onto your home WiFi, they needn’t be a part of the same system as the Eras in order for AirPlay to play to all the speakers - they just need to be on the same network. However, if you are the only person at your work who uses the Roams, it might just be easier to reset them both, join them on to your home system, and then take them to work when needed without resetting them again (you will need to setup your work WiFi again, though). Your Sonos “Household” (system) will then be split across the two locations. The next time you take the Roams home, that’s literally all you would need to do - once home, they would automatically re-join your home system. Note that having a system split across two locations can cause issues with cloud-based Voice Assistants (Alexa and Google Assistant), but as long as no room names are duplicated, it’ll probably be okay. Please also note that if you reset both Roams, they will lose any configuration, favourites and Sonos playlists (though when you add them to your home system, they will import all these from that system).

Again, this is not a supported way of doing things, so I can’t promise any of this will work, but I suspect it will.

I hope this helps.

 

Is there some way, or trick, to join the Roam to a network without using the Sonos app?

Translate
Airgetlam
Mar 23, 2024 6:08 PM UTC

No. 

Translate
Bruce
Lyricist III
Mar 24, 2024 2:58 PM UTC

Hi @Ejenkins57 

Welcome to the Sonos Community!

You can take your Roam to the second location and use it on Bluetooth or on WiFi, but it cannot become part of the other Sonos system without being reset. You would then need to reset it again for it to once more be part of the first system.

If you don’t want to reset it, and assuming that the app on your phone “knows” both systems, it might be best to follow these steps:

  1. At home 1, where the Roam currently is, reset the Sonos app and choose “Connect to Existing System”. This will erase the app’s knowledge of the second system.
  2. Take the Roam to home 2, as well as a spare phone/tablet.
  3. The Sonos app is not written to be able to switch between two systems on one WiFi network, so install the Sonos app on the spare phone/tablet and connect it to the existing system at home 2.
  4. Turn on the Roam and open the Sonos app on your (first) phone - it should say that it can’t connect to your system. Tap Fix It and follow the steps on the screen to connect your Roam to the new WiFi.

To be honest, it may be easier to just reset the Roam and add it to whichever system you’re with.

I hope this helps.

 

 

For this method, I reset the app at work where the Roam’s are to erase my home system (where the Era 100’s are).

Then I connect a different device (tablet) to home system.

Then I turn on the Roam and using the original phone and use the ‘fix it’ steps.

What do I do when I take the Roam back to work ?

 

Translate
Lyricist III
Mar 25, 2024 12:32 AM UTC

However, if you are the only person at your work who uses the Roams, it might just be easier to reset them both, join them on to your home system, and then take them to work when needed without resetting them again (you will need to setup your work WiFi again, though). Your Sonos “Household” (system) will then be split across the two locations. The next time you take the Roams home, that’s literally all you would need to do - once home, they would automatically re-join your home system. Note that having a system split across two locations can cause issues with cloud-based Voice Assistants (Alexa and Google Assistant), but as long as no room names are duplicated, it’ll probably be okay. Please also note that if you reset both Roams, they will lose any configuration, favourites and Sonos playlists (though when you add them to your home system, they will import all these from that system).

 

@Corry P , For this method, when resetting both Roams at work, do I also need to reset the app?  Or just reset the Roams, take them home, join them there, then when I get back to work, will the app freak out?

Translate
Corry P
Sonos Staff
Mar 25, 2024 11:45 AM UTC

Hi @beholder 

If you are the only person at your work who uses the Roams, just reset both, take them home and add them to your home system. When going back to work, take the Roams with you, turn them on and the un-reset app should just pick them up (though it will say your Era 100s are missing - as close to “freaking out” as it should get). You will need to add the work WiFi credentials the first time you do this, but as long as you don’t reset the Roams, you will only need to do this once. Do not reset the app at any point.

If, on the other hand, you are not the only person who has access to your Roams at work, please let me know, and I’ll do my best to come up with a method for you.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Lyricist III
Mar 25, 2024 3:26 PM UTC

Hi @Corry P 

Thanks for getting back to me.  

Yes, I am the only one at work using the Roams.

I did reset them both and took them home last night.

I set them up on the home network, no problem there.

I took them to work today and opened up the app and it gave me the ‘fix it’ scenario, which did join them to the work network…

Before I did the ‘fix it’ method, I tried opening the app on my MacBook, but the problem there was that it gave me three  options:

  1. connect to existing system 
    • it couldn’t find the roams so this didn’t work
  2. learn how to set up a new system
    • this just linked me to the app download page on the Sonos website
  3. cancel setup and quit the app

So the MacBook app setup didn’t work (I would’ve tried my tablet, but didn’t take it to work)

 I’ll have to get back to you tomorrow to let you know if everything joins up again when I take them home.

I really appreciate your help… these little speakers are awesome I must say, especially when joined up with the Era 100s!

 

 

 

 

Translate
buzz
Grand Maestro
Mar 25, 2024 4:13 PM UTC

We have an S1 system at work, and I have S2 at home. At home I have multiple WiFi networks and the SONOS units can make their own choice. Initially, of course, when I took one of my units to work, this unit was upset because it did not have work’s WiFi credentials. I was using my S2 controller at work and it offered to fix the WiFi issue. Eventually, after I returned the unit home, it updated my other home units to include work WiFi. Now I can take any of my home units to work and use my S2 controller to operate my units — without any fuss.

SONOS can track up to 16 WiFi networks.

Translate
Corry P
Sonos Staff
Mar 25, 2024 4:14 PM UTC

Hi @beholder 

Yeah, that sounds like expected behaviour from the macOS app - it’s not capable of WiFi setup, so it wouldn’t offer you the option, and as the Roams weren’t yet connected to your work WiFi, it couldn’t communicate with them normally. Good to hear that you got them connected using your phone.

I am glad to hear you are enjoying the speakers themselves - I have one in my bedroom and just this very morning - no lie! - I actually thought to myself as I got up that it has very impressive bass for their size! I can’t remember what was playing, but it must have sounded good!

You are most welcome!

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Lyricist III
Mar 26, 2024 1:33 PM UTC

Hi @Corry P 

Ok, so no problem reconnecting to home network.

But this time when I brought them back to work, only 1 connected to the work network… the other is not connecting… what should I do to connect the second one?  I’ve powered it off and on, but still not connecting, and I don’t see anywhere on the app an option to reconnect.  Do I need to reset again?

Translate
Corry P
Sonos Staff
Mar 26, 2024 2:11 PM UTC

Hi @beholder 

That is strange - but there’s enough information in the behaviour to suggest that the issue is with the network rather than the speaker. My reasoning is that both speakers have been treated in exactly the same way by you, so there is no explanation for why one would connect and one would not - not one that can be addressed from within the Sonos app or by doing anything to the speaker, at least.

If it’s not an Enterprise network (i.e. if you run a small store or private office), your best chance may lie with rebooting the network - but please only do this if you are in charge, or if you speak to who is in charge. Don’t risk your employment, is what I’m trying to say!

Resetting the speaker may help, but doing so would not address whatever is going wrong so you would likely need to do so again, at some point. Therefore I would not consider this a resolution - more a duct tape application. If rebooting the router does help, a more permanent solution might be to reserve IP addresses for devices that commonly connect to your work WiFi, including the two Roams.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein