Skip to main content
Contributor I
Nov 22, 2022 6:01 PM UTC
Answered

Playing TV Sound In Other Rooms - ISSUE

I have a 2022 Sonos Arc, Sub, 2x Rear One SL speakers in the TV Area.

When grouping the Sonos Five in the kitchen or Sonos One SL in the Bedroom, both these speakers are cutting out.

This only happens when listening to sound through the TV. (YouTube, regular TV channels etc).

It does not happen when listening to Spotify through the Sonos app.

 

When speaking to Sonos customer service for the 3rd time this week about the issue, the 3rd person has now confirmed it is not possible to play sound from the TV through more than the Arc, Sub and 2x SL rear speakers (5.1 surround set up).

Any speakers grouped outside of the 5.1 set up will get this intermittent cutting out. 
I have even tried Ethernet directly into these speakers from the router. Which I suspect the Sonos Boost will replicate if purchased. 
Sometimes it can work without issues and sometimes it’s really bad. More so than not it is bad.

 

Network speed here is:

150mb Download (Fibre to premises)

30mb Upload (Fibre to premises)

 

Does anyone have a solution or get around for being able to play TV sound on whole house speakers? (1x Arc, 1xSub, 2x One SL, 1x Five, 1x One SL). 

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
John BAnswer
Nov 24, 2022 9:35 AM UTC

A Boost will have the same effect as wiring to another speaker, not to the Arc itself.  So that doesn’t look promising.  To make sure it has gone over to SonosNet, check that all your speakers have WM=0 in About My System.

Because you build your group from the Arc, the Arc acts as Group Coordinator (GC).  The stronger the signal at the GC the better the performance of the group. It should be OK wirelessly, but maybe there is some local interference which is scrambling it

Could you go back to wiring one of the other (non-Sub, non-surround) speakers and put the Arc back on wireless temporarily?  Check the WM=0 thing.  Experiment with changing the SonosNet wireless setting and Group Audio Delay.  If you can’t find an acceptable solution there is one more thing we can try to help us see why it’s not working perfectly, so please post back either way.

I think it is fair to say that Sonos isn’t designed to play TV audio in other rooms, and ir is sometimes more problematic than grouping for music.  I think the very existence of a Group Audio Delay setting is an acknowledgement that Sonos wants to make this possible, but that it can be problematic and imperfect.

22 replies

John BAnswer
Nov 24, 2022 9:35 AM UTC

A Boost will have the same effect as wiring to another speaker, not to the Arc itself.  So that doesn’t look promising.  To make sure it has gone over to SonosNet, check that all your speakers have WM=0 in About My System.

Because you build your group from the Arc, the Arc acts as Group Coordinator (GC).  The stronger the signal at the GC the better the performance of the group. It should be OK wirelessly, but maybe there is some local interference which is scrambling it

Could you go back to wiring one of the other (non-Sub, non-surround) speakers and put the Arc back on wireless temporarily?  Check the WM=0 thing.  Experiment with changing the SonosNet wireless setting and Group Audio Delay.  If you can’t find an acceptable solution there is one more thing we can try to help us see why it’s not working perfectly, so please post back either way.

I think it is fair to say that Sonos isn’t designed to play TV audio in other rooms, and ir is sometimes more problematic than grouping for music.  I think the very existence of a Group Audio Delay setting is an acknowledgement that Sonos wants to make this possible, but that it can be problematic and imperfect.

Translate
APMSONAuthor
Contributor I
Nov 24, 2022 2:26 PM UTC

@John B 

Thanks for your input. I will try these things.

Worst case I will put a Ethernet directly into the Arc as this has solved the issue and can fall back onto this as a solution. 
The Sonos is wall mounted at one end of an completely open room and although it will be pain to feed Ethernet into the stud wall it is 100% doable. 

Translate