Skip to main content
Contributor I
Nov 22, 2022 6:01 PM UTC
Answered

Playing TV Sound In Other Rooms - ISSUE

I have a 2022 Sonos Arc, Sub, 2x Rear One SL speakers in the TV Area.

When grouping the Sonos Five in the kitchen or Sonos One SL in the Bedroom, both these speakers are cutting out.

This only happens when listening to sound through the TV. (YouTube, regular TV channels etc).

It does not happen when listening to Spotify through the Sonos app.

 

When speaking to Sonos customer service for the 3rd time this week about the issue, the 3rd person has now confirmed it is not possible to play sound from the TV through more than the Arc, Sub and 2x SL rear speakers (5.1 surround set up).

Any speakers grouped outside of the 5.1 set up will get this intermittent cutting out. 
I have even tried Ethernet directly into these speakers from the router. Which I suspect the Sonos Boost will replicate if purchased. 
Sometimes it can work without issues and sometimes it’s really bad. More so than not it is bad.

 

Network speed here is:

150mb Download (Fibre to premises)

30mb Upload (Fibre to premises)

 

Does anyone have a solution or get around for being able to play TV sound on whole house speakers? (1x Arc, 1xSub, 2x One SL, 1x Five, 1x One SL). 

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
John BAnswer
Nov 24, 2022 9:35 AM UTC

A Boost will have the same effect as wiring to another speaker, not to the Arc itself.  So that doesn’t look promising.  To make sure it has gone over to SonosNet, check that all your speakers have WM=0 in About My System.

Because you build your group from the Arc, the Arc acts as Group Coordinator (GC).  The stronger the signal at the GC the better the performance of the group. It should be OK wirelessly, but maybe there is some local interference which is scrambling it

Could you go back to wiring one of the other (non-Sub, non-surround) speakers and put the Arc back on wireless temporarily?  Check the WM=0 thing.  Experiment with changing the SonosNet wireless setting and Group Audio Delay.  If you can’t find an acceptable solution there is one more thing we can try to help us see why it’s not working perfectly, so please post back either way.

I think it is fair to say that Sonos isn’t designed to play TV audio in other rooms, and ir is sometimes more problematic than grouping for music.  I think the very existence of a Group Audio Delay setting is an acknowledgement that Sonos wants to make this possible, but that it can be problematic and imperfect.

22 replies

Nov 22, 2022 10:09 PM UTC

There is nothing faulty with your network. But for some reason the audio data packets are not arriving fast enough for the grouped speakers to assemble, decode and play the music smoothly in the buffer time allowed.

Translate
Nov 22, 2022 10:14 PM UTC

As an experiment, could you wire the Arc by Ethernet to your router?. 

 If that is impractical please connect one of your other speakers, moving it if necessary.

Wait a few minutes then try it with various Grove Audio Delays

Translate
APMSONAuthor
Contributor I
Nov 22, 2022 10:39 PM UTC

As an experiment, could you wire the Arc by Ethernet to your router?. 

 If that is impractical please connect one of your other speakers, moving it if necessary.

Wait a few minutes then try it with various Grove Audio Delays

I did wire (Ethernet) one of the One SL to the router today and it was still experiencing the same cutting out on that SL speaker. 
Tomorrow I will try connecting to the Sonos Arc with Ethernet with the arc lead still connected.  

Translate
Nov 22, 2022 10:46 PM UTC

Was the One SL you wired one of the surrounds?  I should have specified never wire a surround or Sub.

Translate
APMSONAuthor
Contributor I
Nov 22, 2022 10:50 PM UTC

Was the One SL you wired one of the surrounds?  I should have specified never wire a surround or Sub.

No it was a new one I purchased today. Not part of the home theatre 5.1 group. 

Translate
Nov 22, 2022 11:22 PM UTC

After wiring a device you need to give it some time to reconfigure.  Check that all speakers except Move and Roam have WM=0 in About My System. 

Translate
APMSONAuthor
Contributor I
Nov 23, 2022 9:19 PM UTC

Ok so update:

 

I have added Ethernet cable from router directly into the Sonos Arc and issue resolved 100%. No cutting out on the speakers outside the ‘Home Theatre’ speakers!!

So…does this mean I can buy a Sonos boost and it will do the same thing? 
 

I did try an Ethernet cable into one of the speakers outside the Theatre 5.1 set up and it didn’t resolve the issue. 
Does that make sense? Or maybe I didn’t leave it plugged in long enough? But pretty sure I left it in for a good 5 mins or more. 

Translate
Stanley_4
Grand Maestro
Nov 23, 2022 9:36 PM UTC

As long as you can wire one of your main speakers to Ethernet (not Sub or Surrounds) a Boost will do little for you. It was discussed earlier that it looks like the Boost may be being discontinued.

I’ve found with my router I get a more stable Sonos setup by assigning static/reserved IP addresses and wiring as many Sonos (main speakers) as possible. A full Sonos and network reboot after assigning the addresses should get everything in sync.

Translate
APMSONAuthor
Contributor I
Nov 23, 2022 9:41 PM UTC

Just to add… What amazes me more than the people on here willing to help and incredibly knowledge, is …..being told by Sonos themselves that what I am trying to do is not possible and Sonos is not designed to play audio on other speakers outside the Theatre 5.1 set up.

I am shocked! 

Translate
Airgetlam
Nov 23, 2022 10:48 PM UTC

Users of the product often have more knowledge than people who are paid to answer phones, and frequently work more from a script than first hand knowledge. That’s not unique to Sonos in any way. 

Translate
Bruce