Components & Architectural

Hi! Can anyone tell me the distance in inches from the front feet to the back feet for the Pro-Ject T1 SB Turntable?I just ordered one yesterday and I’m now looking for a bookcase to put it on. All of the bookcases I have found that I like are slightly smaller in depth than the overall depth of the turntable. I don’t mind a bit of overhang so long as the feet are solid. The bookcase I like the best, for example, is 11.75” deep. I am hoping the feet of the turntable will fit on it.  Thank you. 

Hello Everyone, I am new to the Sonos family, having just purchased a house with a built-in Sonos system (amp + 5 ceiling speakers throughout the house). We also purchased a Sonos Arc and Beam 2. I have the system up and running, meaning that I can listen to music. However, I am having trouble identifying and isolating the built-in ceiling speakers by room. When I try to identify the architectural speakers using the S2 App, I hear the high pitched sound coming from the speaker, but then the App says that "No Sonos Architectural speakers detected". What am I doing wrong here? I have tried the older App (S1), but it says that all of my components are up-to-date and compatible with the new App. Surely, I am missing something. I just want to be able to control the volume by room (we have one in a bathroom, and it is super loud because I can't control it individually). I should note that I can isolate the Sonos Arc, Beam 2 and the main system Amp, so I can control those individually, just n

To my delight i have been able to play my cds through an era 100 using the sojos line in adaptor and two rca plus into the aux out jacks on my cd player. So far so good. My denon dp 200 turntable previously played by connecting to the aux in jacks on the cd (denon m35) and then through the passive speakers. But now the old denon speakers have gone i'd hoped the turntable would also play through era, again using aux in for turntable and aux out to connect w era. However this does not work (tho i am told dp200 has built in pre amp). There seems no other way to connect dp200 to era's line in.  I am outof my depth and maybe not mqking sense. But of course grateful for any suggestions...

Hi Guys,I have conntected my Epson Projector to my mixer via audio out 3.5mm from my project to phono (red and white) 6.5mm on one of my mixer channels. I can see the sound going into my mixer when I play something on the TV so I know the sound is definitely working. I think plug a red and white phono jack from the out put of the mixer to the RCA input of the Sonos AMP. On the sonos app I select line in. There is a setting which says Stero/Mono. I am not sure which one to select for it to work. I have it on Stero but there is no sound coming through.Thanks for any help you can provide!

When I connect the power to my Sonos Amp, the white light comes on for a split second and then goes off and will not come back on. I have tried to carry out a reset but it does not respond. Can anyone help?

Hello, I am trying to understand if I can use 1 Sonos Amp to setup a pair of Sonance in ceiling speakers for surround sound and another pair to use outdoors to play music?

Hola tengo una consulta, el Sonos Amp tiene formato Flac y Alac es compatible? 

Hello all, I just bought a Sony turntable with phono preamp to play vinyl on. I currently have the Amp, Sub, Arc, and two Sonos architectural built in speakers. The whole Sonos system is set up in my family room like surround sound. When I connect the turntable to the Amp, the app does not give me the option for Browse> Line-In. Does that mean that I would have to disconnect my surround sound system from the Amp in order for it to play the turntable? I would love to leave everything connected and just be able to play my turntable over the whole system. Is that possible?

I’m wiring 5 Amps into a new construction home that does not currently have wifi, but the amp will be hardwired to the speakers. Can I set-up the Amp via bluetooth, or do I need to have wifi? In a pinch I can connect to an iphone hotspot. 

I am trying to use the Sonos Port with my Autonomic multi zone amp. I know of no issues with speaker connections as the previous system worked ok. Is there any compatibility issues with mirage and Sonos?

I’m working on connecting two speakers in the master bath of a home I’m building (Klipsh CDT-3650-C II in-ceiling speakers, 8 ohm) to a Sonos Amp, and I’m unsure how to connect the wiring to the amp.When the wiring was put in place, both speakers were wired in mono (12 gauge CL2, in wall speaker wire). This means that I only have (1x) red lead and (1x) black lead for both speakers in my control cabinet, and I’m unsure how to wire it into the amp. Do I connect them to the L input via the banana plugs, and then select the “Dual Mono” setting in the Sonos App? Any advice would be appreciated, A/V is not my strong suit. Thank you!

Dear Community,I hope someone has bumped into a similar issue at some point and can guide me in the right direction.At my workplace we have bought several Sonos Port-systems for a convenient way for our staff to listen to music in different locations.I can setup a Port-system along with an iPad to control the music, and it works perfectly fine.But when I move it to the physical location it is supposed to be it does not work.We have a fairly modern network with multiple access points serving the same SSIDs and on the network the Port-system is on, we have no endpoint-isolation, and it has Internet connectivity. The MAC-addresses for iPads and Sonos Ports are whitelisted. The Port systems and iPads are on the same wireless network. We use certificate based authentication, and that should not be an issue since it works perfectly at my desk.Starting over, as in resetting the Port and configuring everything from start in the intended location does not work at all.Does the Sonos system care

To start, I have scoured the internet and nothing has worked to resolve this issue. Existing Sonos speakers working through app.Older Connect on hand and on network. Krell integrated receiver. Thiel speakers. Trying to connect Thiel speakers through Krell amp and connect to Sonos. Nothing except a buzzing. Tried multiple inputs etc. Help!!

all of a sudden my sonos amp is automatically turning itself down  . i turn it up , and it will just go right back to 15. I submitted a diagnosis # 1231294586. 

Hello All,Components:Amps (3 on ethernet connection)  Move (wifi) One (wifi)I have tried:Disconnect Router 180 seconds Plug in router Add 1 Amp - tested fine Add 2nd AmpResult:Network locks up. Removing 2nd Amp and the network comes back. 

I recently purchased a new Sonos Amp and would like to drive 2 pair of in wall speakers. Each pair is wired with an impedance matching volume control (Niles VCS100K). 1 speaker pair is 8 ohms, the other pair is 6 ohms.I'm aware that Sonos doesn't recommend pairing this combination of speakers. Reading through the forum I haven’t seen any posts that specifically address the presence of impedance matching controls. Is there any reason this 4 speaker setup wouldn't work if the controllers were configured properly? 

I have been using a connect amp for the past 8 years on a strong Wi-Fi signal off a Wi-Fi extender as our main router is not in the main living area. A few months ago we upgraded our main router and ever since then we have not been able to see the connect amp.  I have been told that Sonos will not work on a wireless extender …. But it has for the last 8 years.  I have reset it and the app finds it, then won’t connect to it. I cannot connect it directly.  can anyone suggest a solution. 

Hi, I’m still confused after a fair bit of research I’ve done. I own a 1970s Yamaha turntable with a Pioneer amplifier. I own a Sonos Beam and keen to expand my sonos family with either a punchier speaker or adding a Sub. Attached is a pic of my vintage amp so you can see all the complicated wires (yes i’m not very savvy with this stuff). So basically can I get a recommendation with what setup I should go for to get the best quality sound. I was thinking either the Port, Amp or Sonos five? Please help !

Kjøpte Sonos port i går for å kunne spille vinyl på platespiller til Sonos Ikea symfonisk lampehøytalere. Elendig lyd. Hvordan kan jeg få høyere og bedre lyd? Har satt full volumstyrke i appen, men det hjelper ikke. Kun platespiller som er koblet til porten.  Moderator edit:Google Translate-Bought the Sonos port yesterday to be able to play vinyl on the record player for the Sonos Ikea symphonic lamp speakers. Lousy sound. How can I get louder and better sound? Have set full volume in the app, but it doesn't help. Only the turntable connected to the port.

So I have a setup including 4 Sonos One speakers ( Generation 2 ), and 1 Sonos Beam soundbar. Prior to getting these I had fondly imagined that in time I’d be able to get a turntable of some kind that would wirelessly connect with my system, so that I would be able to hear my old vinyl again. Too late have I come to appreciate that this can only be done via Bluetooth ( not Wi-fi ), and as the One speakers are not Bluetooth-enabled, that seems to be that, and I am stuffed. having just acquired all this Sonos gear at what to me amounts to significant expense, I am in no great hurry to junk my Sonos Ones and shell out further hundreds to substitute Bluetooth. Does anyone out there have any idea how I can achieve what I need without starting all over again / breaking the bank in the process ? many thanks in anticipation !

Hola tengo un sonos amp y quiero saber si es normal que cuando este en función se caliente un poquito por la parte de arriba y en los lados?

Hello allI’ve recently purchased a second hand connect amp (2nd gen) along with two new sonos ceiling speakers to add to my existing kitchen set up (2 x ones and a sub). It appears the connect amp has to be in its own separate room and grouped with the kitchen - a bit annoying as they tend to ungroup themselves but I can live with it (is this the same with the latest amp?). After a short time of listening to the grouped system the wifi tends to drop out and I have to reset the router. This wasnt happening before i added the connect amp and it also tends to happen when i first use the speakers in the morning, so im pretty sure the connect amp is the cause. Does anyone have an idea why this might be? Hardwiring the connect amp to the router may be possible, will that help?Thanks in advance!

Hi,I am looking at purchasing a Sonos Amp as well as 2 pairs of Sonos in-ceiling speakers. I want to use 2 ceiling speakers (1 pair) outdoors for outdoor entertainment, and the other 2 speakers (1 pair) in the lounge room for watching TV as well as listening to music, all connected into the one amp. I would like to be able to turn off the outdoor speakers while using the indoor ones and vice-versa.   I have done some searching and found that a cost effective alternative (instead of buying another amp) is to buy an impedance matching switch. I don’t want a volume controlling switch just an on and off one is fine. Will this one do the job? Monoprice 4-Channel Speaker Selector https://amzn.asia/d/cQ6XXRsI would also like to know if I am still able to use all of the amps smart features, e.g volume control through the app, Trueplay, and connect another Sonos product such as the Arc Soundbar to the amp to play sound through ceiling speakers and sound-bar simultaneously If someone has any sli

Hi there, I have a Sonos Amp and Outdoor speaker setup. The Amp is in a lift space, and not that accessible. Everything works great through the Sonos app.I would like the option to play music through line in, without hardwiring to the Amp. I've seen a wireless transmitter (the type used for Subs/ surrounds) and wondered whether this would work?One receiver plugged into the Amp and the transmitter plugged into an iPad, for example?Any support or other ideas would be appreciated.The real desire is to play videos from YouTube through the Sonos speakers with no lag.Thanks,David.

Hi,I clearly don’t know much about speaker wire! Do I need 2 or 4 conductor wire for a future Sonos amp plus 4 Sonance outdoor speaker set up?Thanks for your help!