Components & Architectural

Hi - I have my pro ject 1 turntable connected via Port and see line in as an option, but can't get audio output to Arc/sub 

Can a Sonos Connect Amp Gen 2 be used as desktop PC speakers anmd works well? I can easily buy a sound card with RCA line out for the Connect Amp’s RCA line in. I have a ageing Logitech 2.1 Z2300 speakers and certainly a Sonos should sound way better.

CiaoPlease can you share with me the procedure to connect my victrola hi res turntable by bluetooth connection to my new speaker era 300?Thanks for your collaboration Marco 

I have recently added a Sonos Port to my Sonos system, working well.A small observation, after I have turned the turntable OFF with “Line Level Output” connected directly to Port, I still see a continuous network stream on my WiFi from Port to Sonos Speakers, looking on the Sonos App I see the animated graphic equaliser icon next to the line-in in Sonos App.To stop this network stream, I click ‘Stop’ in Sonos App. Is this normal behaviour for the Port, or is it not ‘auto-detecting’ the line-in state correctly?

Hi,I have a Sonos Connect:Amp. As I changed my WiFi provider I had to reinstall the Sonos item. As I went through the process, it ran an update and I got error message 1,108. For some reason find anywhere what this error code supposed to mean. Can anybody help? Below a screenshot from the error message.  

I currently have the Garden Series 8.1 system in the garden around my 16x36 pool. Most of the speakers in the garden face my house from the opposite side of the pool. I’d like to add outdoor speakers onto my house facing the pool to get better sound coverage across the entire yard and the patio that sits between my house and the pool.  Which outdoor speakers would be best to use on the house so that the sound produced by the Garden Series and outdoor speakers sounds roughly the same? Does it really matter? The sound will sort of overlap in some areas, especially on the patio.  in this setup I would connect the outdoor speakers on the house to a separate Sonos amp to create 2 zones. 1 for the pool and 1 for the patio. Appreciate any insight anyone has.

Hello,I currently own a Sonos One (Gen 2), and I was recently gifted a turntable that can pair with a speaker via Bluetooth, which isn’t possible with my Sonos One. I'm interested in purchasing the Sonos Roam 2 and would like to confirm if my intended setup is possible before making the purchase, as I've seen conflicting information.Would it be possible to connect the turntable to the Sonos Roam 2 via Bluetooth and then stream the audio simultaneously to both the Sonos Roam 2 and my Sonos One using the Wi-Fi network?I’ve read one source that says this setup works and another that says it doesn’t, so I’m a bit confused.Thank you in advance!

FIX!!! (Ish).  I have this exact problem and just fixed it!  One month ago my playbar stopped recognizing volume controls from both my apple remote and my Samsung tv remote.  I spoke to Sonos and was told that the IR receiver was likely toast and it can't be replaced.  By complete coincidence the Spanish power outage fried my legacy google Chromecast device so I upgraded to a Chromecast 4k.  Just for giggles I thought I would try to set it up with Sonos as my new remote.  It worked in a second and is flawless!!  The IR receiver is fine!  I'm still convinced that a software update impacted these remotes.  If you are having this issue, try a Chromecast remote!

If I connect a CD player (AUX) with Sonos Connect Amp Gen 2, can I add a Sonos Sub Gen 2 to this setup? I am thinking that the Sub is wireless and the speaker/CD player connected to the Amp are wired. Will there be any delay? Or is it better with a third party wired sub?

Hello I have a connect:amp s2. I have had it previously  connect to my system and it worked fine. I recently change out some components and removed all of the S2 amps. I want to now add one back in and it will not go past the press the button on your connect:amp page. The button press is never recognized. I have read of a couple of instances of this happening but did not see any resolution to this issue, anyone run into this?

I am working on setting up a 4.1 system in our living room. (Using a Samsung Frame so wife didn’t want to use a Soundbar)We have 2 LCRs in wall with an amp (phantom center) and 2 in ceilings for surrounds with a separate amp.Debating on whether to use a 3rd party subwoofer or a Sonos Sub 4 subwoofer with the setup.Any pros/cons to each?Thanks!

I found a pair of Polk TSi100 bookshelf speakers and wonder if these will match my Sonos Connect Amp Gen 2?Specs for TSi100 are: 20 watts to 100 watts per channel, 8 ohms, 53 Hz to 25,000 HzSpecs for the amp are: 2 x 55W 8 ohms, 22 Hz - 20,000 HzAt a glance I thought these speakers is a close match but I do not have experience in these stuff.Also these speakers have been rated well.Can anyone help please? 

My current music playing system consists of a two Sonos Play 5 speakers paired as Stereo and a Sonos SUB.  I control them from my iMac using the latest OS and it has a 4GB SSD attached to it where my music files are played.About 90%+ I play music from my files.  I have Qobuz but only use that to investigate new music or other music that I might wish to add to my library.Is there a reason I should consider a networked streamer? What benefits, if any might I realized over my current method of doing things?Thank...

I have a few sonos 5 and sonos 1 and a bridge. I use the bridge to connect to an amplifier to play through standalone speakers but this bit isnt working. Music plays through all the other speakers but not the amp. How can i find out where the problem is

Tengo un connect amp, después que lo configuro, queda parpadeando la Luz blanco/naranja

Hi there. Just purchased a Project T1 SB turntable, and want to connect it to my Play5. Is this adaptor from Amazon all I need? I'm starting to get a bit confused re. Male/female 🤣https://amzn.eu/d/5sljqHZ

I am trying to set up new amp to existing system and when I get to the prompt to push the “press the button on the sonos amp with the flashing light” and it shows picture of join button on rear of amp.I push this button and nothing happens.Is there a solution for this? I have tried all the advice on support. Thanks

I have a surround sound system in my home with 2 amps howeber the app doesnt let me re set the amos and it only connects ti 1 of the 2 amps but doesnt tell me which one

Sonos fails to find devices , or let me setup a new network after I changed Internet suppliers and therefore router. This after the sonos app not finding my music for 6 months is very frustratingI have searched a bit on google for a solution, but so far no help.  My phone app aks me to add a speaker or component, but then says wifi isnt connected, connect to a wifi, . There is no way to get to settings to try there.If I go to help centre it does give me an update network button, but when I try that it tries to do one device at a time, but cant find any devices, probably because it is looking on the old network. I have tried switching 3 of my 4 speakers off, connecting one via ethernet to the new router and then resetting this one, but it has made no difference. Why is there not an option to just update your network regardless of your speakers.  I am stuck in a loop I cant get out off, which presumably renders my speakers as binnable. If there is no simple solution anyone on here Know o

I have a updated port that has a reduced line output. My amp GUI tracks this and I'm down 12db. Has anyone else seen this? This port runs a good size outdoor sound system. So, it's a struggle getting enough source. 

how to setup a tv with 4.1 speaker system with no center channel speaker?

I have a question about the Sonos amp. I have the Sonance Mag 6.1 outdoor speaker system. My question is the volume has to be turned up quite high, like to 60 plus or higher. Is this normal or do I have a problem. I use the Sonos app through Android. Thank you 

Hi All, I know that ‘using Sonos for vinyl’ has been covered and I have read the posts, but I am still unsure about a few questions. Sorry.  My current active speakers (TUK Kanto) have died after less than 5 years ☹️) and I have no vinyl music.  I have three early Sonos One speakers that I use for my computer and in the living room so I wondered HOW I can ‘go Sonos’ for my record player?I understand that I will need a ‘phono preamp’ for the deck.  That’s easy to buy at JBHIFi or wherever. But then, will that alone allow me to play the record player through my existing first gen Sonos 1 speakers?  If ‘yes’, will the record player somehow stream to these speakers wirelessly with the pre-amp added?If not, do I need the phono preamp and something else?  I would consider two new Sonos speakers (maybe 5s or similar) IF they allowed me to play my vinyl through them.  Doing this wirelessly would be a big plus but if I had to I don’t mind using connector cables from deck/phone preamp to Sonos S

I have a legacy Sonos S1 system with 5 Connect:90s, 2 Play:1s, a Play3, and a Sonos S1 Playbar.  (I bought the last at a clearance site.)  My original Sonos Bridge has gone out - power supply I’m sure.  Neither ethernet port lights up, and it’s not my Orbi router or the cable (both check out by connecting a computer).  The Playbar is in the same room as the bridge.  Can I get the entire S1 system working by connecting the Playbar directly?  I will experiment tomorrow when the person who sleeps in the room is awake.  I also have a Boost but I think I need it for coverage (it’s a 3-story house on a hill).  If I can’t use the Playbar, can I use one of the Play1s?

I have a sonos connect that I have used for several years through a reciever.  I have it connected to one of the audio inputs.  Strangely it stopped playing.  I tried a reset several times by unplugging and that did nothing.  I tried a harder reset of the device and than re-added it to my system.  Great. It worked.  But only for about an hour.  Then no sound again. It sits right next to my wifi router. So it gets plenty of signal.  Because it played after the reset, I know it's not the cables.  Any suggestions?