Components & Architectural

my connect amp has been temperamental, but has more or less functioned as i wanted since the initial purchase in 2018. i use it to stream music to old analog bookshelf speakers.it went beyond temperamental and stopped being recognized by the sonos app about 6 weeks ago. i’ve been fiddling around with it, on and off since then. i deleted then reinstalled the sonos app, performed a factory reset numerous times and attempted to log onto my wifi network several times. i have been able to get to the point in the sonos app where i can enter the password. i can see the correct network, i input the correct password, but sonos cannot get on the network.i have seen suggestions to make changes to my network for the sonos. i have five other devices on my network, so i am reluctant to make any router changes for the sonos.i’m thinking, that maybe, i had a lightning surge 6 weeks ago, and that maybe something on the sonos got surged and that is what is preventing it’s entrance to wifi network.this c

I have a Sonos Amp powering 4 Sonance in wall hidden speakers as well a Sonos Mini Sub.  I can add the sub to my Sonos system, but when I add the sub to my Amp it will not play along. After about 30 seconds it will say Sub not connected. I then have to remove it from the system and reinstall it, before it can be used again. If I add it to my Arc ultra, the sub works just fine.  All components are updated to latest firmware. How can I add my sub to the Sonos Amp? 

Bonjour, On vient de m’offrir une platine vinyle sony ps lx310bt (sortie jack, et bluetooth) et j’ai actuellement 4 enceintes Sonos One enceintes ancienne génération. Je ne sais pas comment je peux les connecter, la platine et le système sonos que j’ai déjà configurées.Suis-je obligé de passer par un ampli ?Merci =) Moderator Edit - Translation by Google:Hello,I was just given a Sony PS LX310BT turntable (jack output and Bluetooth) and I currently have four older-generation Sonos One speakers.I don't know how to connect the turntable and the Sonos system, which I've already set up.Do I have to use an amplifier?Thanks =)

Hi folks,I have a project turntable (no pre amp) connected to a Cyrus 1 hifi amp. With traditional wired speakers it works great but how do I connect 2 paired era 300’s. I have the Sonos connector cable from one speaker but where do I connect it to the amp? Thank you 

 I just got a complete system arc ultra sub 4 and era 300.  Was playing around with it and I got the same sound from my sound bar   As my rear era 300. And it sounded fantastic  then I must of hit a wrong button in the app and everything went dead no sound.  Got it back working but on my era 300 alls I get is the surround sound now question is how do I get back the same sound out of my arc ultra as my era 300s at the same time

I have a Bronze Audi speakers wired to my Sonos Amp, as well as my TV. If I was to wirelessly connect a wireless turntable, to the Amp, would the audio still play through my speakers?

I recently purchased a Marantz 7725 2 channel power amp to drive my LR mini towers. To simplify and automate the system for my wife, I intentionally chose an amp that had a 12VDC trigger input. Imagine my surprise when the Port failed to trigger the amp! Grr! I tried Sonos support and the newbie on the line didn’t even know what a trigger was, no less it’s functionality. Double grrr!I am a retired Cedía guy, so I went to this forum to do some research, and learned that the Port’s trigger can only synch 200ma, which is pretty lame IMO. I could not find a spec on the current draw on the Marantz, but I was pretty sure I knew the solution. I bought a 12VDC SPST relay (ELK 912 that I’d been using for years) that draws 40ma from the coil. The Port triggered it open and closed as expected. I used it to close the circuit of a standard wall wart (500ma) and viola! Problem solved.  Sigh…. My love/hate relationship with Sonos continues. At least I got my Music Library back (finally!!!). I was a d

Is anyone else experiencing Sonos May 2024 Deja Vu?TuneIn podcasts haven't been working for close to a month, with apparently no sense of urgency to get this fixed.Now a new update adds steps to the simplest of functions (change the radio station, switch from one speaker zone to another - why more steps??).Just when I was thinking Sonos had stabilized it is eroding again. 

Hi,Unfortunately my Sonos Connect AMP got bricked somehow. I opened it up, measured the voltages and found a UART port. I hooked it up to my laptop and it gave me the following serial output: U-Boot 1.1.1(1-17-3-2.1), Build: 2.1MPC8272 Reset Status: Check Stop, External Soft, External HardMPC8272 Clock Configuration - Bus-to-Core Mult 3x, VCO Div 4, 60x Bus Freq 16-50 , Core Freq 50-150 - dfbrg 1, corecnf 0x10, busdf 3, cpmdf 1, plldf 0, pllmf 3 - vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 300000000, cpm_clk 200000000, bus_clk 100000000 - pci_clk 33333333CPU: MPC8272 (HiP7 Rev 14, Mask unknown [immr=0x0d10,k=0x00e1]) at 300 MHzBoard: Sonos WembleyDRAM: 64 MBDRAM testTest complete - 0 errors, error pattern 00000000Using default environmentIn: serialOut: serialErr: serialNAND:64 MBST Micro NAND 64MiB 3,3V 8-bit at 0xf8000000 (64 MB, 16 kB sector)Bad block lbase 0, pbase 0, count 4096Net: FCC2 ETHERNETHit any key to stop autoboot: 0 S0 provisi

hi all - so now I'm attempting to connect a few hifi components…Pro-ject S3 CD Player+Pro-ject Tuner Box S3 DAB++Pro-ject T1 Evo Phono turntable+Pro-ject Stereo Box E integrated amp+Sonos Era 100s (set up as stereo pair)So firstly it seems there aren’t enough inputs on the back of the Stereo Box E for all this. Secondly, even connecting all but one component (the DAB) I still can’t get any sound out of my speakers.Would a different amp solve this?thanks :) James

Several months ago I purchased a Victrola Sonos Stream.  As a record player connected to my E-300 speaker, it’s a delightful experience.  But when I use the Bluetooth to go to a pair of headphones, the audio is 90% weighted to the left side, and there’s quite a bit of fuzz.  I’m using Sony MX5s, also tried AirPod Pros 2 same situation. I bought a $70 preamp on Amazon - didn’t help. Any suggestions on what to do?

I'm having trouble to connect my zp90 to my Sonos setup/network. I have the S1 app and have a play:5(gen1) connected. I used to have my own soundsystem connected with the zp90, but moving some parts I can't seem to get the zp90 online again. I'm following the instructions on the S1 app but can't seem to find the device, even if connected to the router with LAN cable. The zp90 just keeps blinking very fast white light. What am I missing? How to set up the zp90 these days? 

Since 2014, you have gone from bad to worse. While your sound remains great (who’s isn’t?), your lackluster software upgrades / support have been a perpetual joke. How are you still competing with superior vendors, one might ask?  I’ll leave that to others to discover.

I am thinking of upgrading my Move to a Move 2 (which has line-in connection).  I would like to use the Move 2 to play from my record deck which has an amp. I have the Sonos adaptor and  the cable. I would hope to then be able to group the Move 2 to the rest of my Sonos speakers to play music from the turntable. I think this should work, but before I make the upgrade investment I wanted to check if anyone else has successfully done this?Thanks in advance.

Hii have a pair of Era 100, which work great when streaming Apple.I have also bought the Victrola Carbon stream turntable which is advertised as being Sonos ready. It connects wirelessly to the speakers. My problem is that when playing records on the turntable I can only get sound from one speaker. Initially both speakers worked but the quality was awful. I read that switching to Lossless will resolve the problem. It certainly improved the quality but now only works from one speaker. Im not very savvy in these matters, so if anybody can offer any help or suggestions I’d be very grateful. Kind regards   

Hi, anyone knows the value of this 2 diodes next R1260 and C39. The amp is dead and found IC U28881 was blown. Replaced it  but now the red light is blinking and I believe it’s an indicator for protection. It’s missing 5V switching supply to the IC next to it. Hopefully someone with similar problem can assist me solve this. Thank you in advance. 

I have an audio technica AT-LP60XBT Bluetooth record player and want to know if this hypothetical set up will work. The thought is it to have it be able to connect to one era 100 via line in and then be able to move around my sonos speakers depending on which room we are in.  My set up: Family Room:arc ultra Sub 4 Dining room:2 Era 100s (stereo pair)record player  When I first got the sonos (arc, sub, 2 era 100s), I was able to connect my record player to the arc ultra via bluetooth. For some reason I am not able to connect to it anymore. It will connect to a yamaha soundbar on the other side of the house before connecting to the arc ultra in the same room. Not sure what happened or why things changes.  When I was connected via bluetooth (arc ulta/sub 4 and record player) the sharing between dining room and arc ultra was not smooth.  I want to seamlessly share between my rooms (dining room and family room) while playing my record player.  Will I be able to accomplish this by hooking up

I have a port hooked up to a vintage music centre via analogue (obvs). All has been well but recently the port has started making a weird noise. It’s hard to describe, a digital noise that isn’t particularly loud but is noticeable. It almost sounds like something from an old space invaders game. It occurs every 56 seconds and regardless of whether music is playing. If I reboot the Port it will go away but returns after some time, don’t know exactly when.  I’m presuming the Port is faulty but wondered if this was a known issue. Has anyone experienced anything like this? 

Hi! I have old Sonos connect on a NAD amp. I would like to connect Sonos in-wall speakers. As they are passive it should work properly.Have you tested this configuration? Do you confirm ? My plan is to be ready to change the Connect to a future Port and Sonos Amp later. Thanks for the help ; )

Current setup: turntable --> pre-amp --> era 100. i want to have the turntable audio also play out of my Adam A5X active studio monitors.Can i get a sonos port, and connect the outputs to the Adam A5x(no inputs connected to port) and then group the Era 100 turntable audio to the port, so that the audio from the turntable plays out of both the era 100 and the adam a5x’s via the port?if so, will there be a delay of any kind?

I have the possibility of purchasing a secondhand Sub Gen 3.  Will it work with my Connect:Amp Gen 2 through the S2 app?  Much searching online and I know that the Connect:Amp Gen 1 definitely will NOT work, but unclear whether the Gen 2 will.  Thank you for any assistance.

Looking to add the Pro-Ject Debut Carbon Turntable in Walnut (Sonos Edition) to my SONOS set up so that I can stream my vinyl around the house. However, for sitting back and enjoying the full vinyl experience i want to play vinyl through my traditional amplifier and speaker set up. Will the Pro-Ject Debut Carbon Turntable work through a traditional set up?

I plan to use Sonos amp to drive my JBL l100 MKII speaker, but I'm not sure if it's appropriate and if it can fully utilize the speaker's capabilities.Do you have any friends with experience in this area? Please advise.

I have a house with in-wall/in-ceiling speakers in 4 different rooms plus outdoor for a total of 5 zones. They are connected to a mechanical switch box and then a Denon AVR. The switch can select one or more zones for playing the source audio. Each zone has a wall mounted volume control.I know I can connect these speakers to my Sonos system with Sonos Port but I’d like to see the individual zones in the Sonos App and control the volume using the app. Is there an alternative to the existing “dumb” speaker selector switch that will integrate with Sonos and let me do what I want?Any thoughts or suggestions would be much appreciated!  Thanks in advance. 

I have two Sonos Connect Amp Gen 1 connected to a pair of KRK Rokit 5” and 8” speakers.  In both cases, there is LOTS of static coming from both speakers.  I paid $40 for two double shields RCA cables, and the static persists.  I’ve read a LOT of threads with people complaining that these Connect Amps produce static.  I’m 99% certain that the issue is with the Sonos Connect Amps, but thought I would ask regardless if anything can be done to eradicate the static.