Components & Architectural

Hey, We have 5 ZP120 Sonos devices in our office. Plus VoIP(Snom). Whenever Sonos has been on for more than 20 minutes, our VoIP starts to fall out. People cannot hear us, we cannot hear them. There is also noise. Our VoIP base stations has been moved away from the ZP120 devices. No luck. Any suggestions?

Anybody know what the input impedance of the RCA inputs on Connect or Connect Amp are, as I need to design an attenuator. I realise there is a setting for sensitivity, but I use a switch before the RCA input and need to pad down one of those feeds.

Is it possible to make a app for Apple Watch?

I'm thinking about setting up a Sonos network, and wanted to make sure I have this right. I presently have a Denon AVR-1700 receiver hooked up to a Bose pre-amp through the MD/Tape output, so that I can use the Bose 901 speakers I have. The RCA cables go to and from the pre-Amp via RCA. Other inputs to the receiver include a turntable (via RCA) and the television (via optical). It's my understanding that from the pre-amp I can link the Sonos Connect in via RCA, and then throw the signal back to the receiver via digital out on the Connect. I believe anything on the receiver (television, turntable, etc...) could then be transmitted to Play 1 speakers in other zones. Is this correct? Will there be a delay? Pretty confusing (at least for me), so I appreciate any help. Thanks.

My sonos works perfectly in the bedroom, but it won't connect in the living room. I'm trying to play from my laptop library, but get a message: error message unable to play 'name of song' the file name of location .m4a cannot be found In one room it works fine, in the other, nothing.

Hey I have misplaces my screws to my sonos 1. I need to screws. How do I get then? can I get some i Denmark? what is the type of the screws?

researching z-wave. looks like it uses an intranet system something like our sonos intranet. Will Z-Wave interfere with Sonos?

I coudn't find it anywhere so I was hoping someone knew about it. What is the range on the BOOST device?

it's possible to configure the Sonos as default audio for every Windows 10 application? if yes, please tell me. attached you find: System information for : the actual default audio Windows10 Home build 10.0.14393

I'm considering adding a turntable to my Sonos setup. There seem to be some good deals on the old ZP100 on eBay currently. Would a ZP100 enable me to add a turntable without the need for an additional preamp?

I was over on the B & H Photo web site and I was looking at the SONOS Subwoofer. It indicated that the Sub now includes "Integrated SONOSNet 2.0 Extender". I then when to the SONOS website and see no reference to this "New" stuff. I also noticed on the B&H site that they had discontinued Subs. Could someone please explain what changed and why the new is better?

Our router was moved to a closet, so I can't plug my Sonos Connect to it as well as keep it connected to my analog receiver and speakers. What do I need to connect to a network? Is the Bridge still my best option or are there other options?

Hello fellow Sonos users, My wife & I are working on remodeling the basement and are at the budgetary phase. My wish to is to add another pair in the house of PlayBar & Sub. The room will primarily used by teens (not us - we want to have some peace & quiet!) and if we can't budget the PB+Sub I'll be looking for plan B. Please don't hate me: anyone has a suggestion for a soundbar + wireless sub and maybe 2 more wireless speakers to make a 5.1 setup? Was looking a Vizio, pricing is appealing ($500 for a 5.1 kit) but what about sound, will I cry my price difference away in regret? Same idea with Sony, Polk and other vendors. Damn why did Sonos make sure a good product? 🆒 Looking for advice & guidance, thanks in advance!

Sub placement

Hi Sonos, firstly "I LOVE MY SONOS SPEAKERS"! However I appear to have lost some of the small rubber feet from the Play 3 speakers I have. Please could you let me know where I can purchase some, as the SONOS rep at my local John Lewis does not know where I can. P.S. My favourite are the Play 1's - sleek and powerful

Can I connect a powered subwoofer to the Connect.Amp with 16 g wire or do I need to use an RCA Cable?

I recently bought a 5:1 Sonos home theater system and wondering the possible positions for the subwoofer and the best position. Can I place the sub woofer below the TV and Playbar in the entertainment center furniture? Any suggestions is highly appreciated

I have several SONOS SPeakers. Today I purchased sonos connect and connected it to my denon x4000 receiver. The sound quality is really bad. I connected into phono input. I have tried other inputs but no sound comes out. Can anyone help

Hi guys, I'm new to sonos but really happy to be part of the community. So far I've got sound bar, play 1s and sub. I notice these are powered up Individually with plug. My question is can these be left plugged in 24/7 For long periods of time or do they need to be turned off when not in use. Thanks for support Kro Brummie65

In a certain iTunes artist folder, I've got 16 albums, all imported from CDs. 3 were brought in as MP4, the rest WAV. Sonos "sees" the 3 MP4 albums, but not the WAV albums. Any ideas?

I have a Connect working well on two Play 5 speakers using the Audio line out from my Bose MC1 Media Centre. The play 5 speakers are in a seperate room to the Bose system (with its Bose speakers) I would like to now add the ability to play the streamed Sonos content through the Bose system, which I assumed would be a simple task of using the Sonos RCA line out as an input into a Bose audio input. Then selecting that input on the Bose system should work - it didn't ! I have tried disconnecting the Audio line in to the Connect in case of any conflict, but this made no difference. Any suggestions appreciated.

I am connecting devices wireless to my beamer via a Chromecast (HDMI). The beamer is hanging at the ceiling. The sound now comes out of the beamer. The beamer has a line out connection so I can connect my beamer to the headphone jack of my play 5, but then of course I need a cable from my beamer to my play:5. Of course this is not an acceptable solution. Hanging the play:5 at the ceiling isn't an option as well. Splitting video and sound from my device results in synchronisation issues + I would still need a cable from my device to Sonos. So what alternatives do I have to connect my beamer to Sonos? Isn't there a small device that only has a headphone jack and the ability to connect to the sonos network?

Is the boost device designed to be only hardwired to the network > or can it be used as a stand-alone signal repeater? Thanks!

Hi there- I just got a vinyplay, which hooks up to my sonos connect via audio cables (red/white). I also have two play 1s in one room and a subwoofer. For some reason, I can only get one of the play 1s to play. The other play 1 just has loud noise coming out of it, so I've unplugged the red cable entirely on the record player so to not send anything through to it. Any ideas? Thanks Zak

Hi Sonos, I got the Play 5s from you guys last week. Love the speakers but due to some unforeseen expenses, I can't really afford the speakers right now. How would I go about availing your return policy? Cheers!