My sonos system is dropping out while playing both Spotify and Tidal. It sometimes comes back to the same track, other times skips to the next track and other times jutters then completly dies. I have tried resetting routers, hard wiring one in to my ethernet but nothing seems to resolve. My diagnostic number is 888534667
Answered
sonos system dropping out
Best answer by Ken_Griffiths
Assuming you’re running the devices on your routers WiFi signal at the moment, perhaps set its 2.4Ghz wireless band to either ‘fixed’ channel 1, 6, or 11 as they provide a non-overlapping signal. Then, if the router allows, set the channel-width to 20Mhz only and see if that improves things for you. See this support link:
https://support.sonos.com/s/article/4769
If you have left a single Sonos device wired to use a SonosNet connection, then do these few things (this is in addition to the router changes suggested above)…
- Ensure the wired device is direct to the router, if practicable, or a wired switch that links direct to the router. (Do not use a HT surround, or Sub, as the wired device).
- Keep the wired Sonos device at least one metre away from your router, or any other wireless device.
- Set the SonosNet channel at least 5 channels away from your chosen router channel. https://support.sonos.com/s/article/1219
- If you do not have any Sonos portable devices (Roam/Move) then remove your WiFi credentials from the Sonos App. See this link: https://support.sonos.com/s/article/3488
- Optionally, consider reserving your Sonos IP addresses in your routers DHCP Reservation Table to keep them fixed to the same address on the network.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Assuming you’re running the devices on your routers WiFi signal at the moment, perhaps set its 2.4Ghz wireless band to either ‘fixed’ channel 1, 6, or 11 as they provide a non-overlapping signal. Then, if the router allows, set the channel-width to 20Mhz only and see if that improves things for you. See this support link:
https://support.sonos.com/s/article/4769
If you have left a single Sonos device wired to use a SonosNet connection, then do these few things (this is in addition to the router changes suggested above)…
- Ensure the wired device is direct to the router, if practicable, or a wired switch that links direct to the router. (Do not use a HT surround, or Sub, as the wired device).
- Keep the wired Sonos device at least one metre away from your router, or any other wireless device.
- Set the SonosNet channel at least 5 channels away from your chosen router channel. https://support.sonos.com/s/article/1219
- If you do not have any Sonos portable devices (Roam/Move) then remove your WiFi credentials from the Sonos App. See this link: https://support.sonos.com/s/article/3488
- Optionally, consider reserving your Sonos IP addresses in your routers DHCP Reservation Table to keep them fixed to the same address on the network.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.