I have two Sonos Connect Amp Gen 1 connected to a pair of KRK Rokit 5” and 8” speakers. In both cases, there is LOTS of static coming from both speakers. I paid $40 for two double shields RCA cables, and the static persists. I’ve read a LOT of threads with people complaining that these Connect Amps produce static. I’m 99% certain that the issue is with the Sonos Connect Amps, but thought I would ask regardless if anything can be done to eradicate the static.
Answered
Sonos Connect Gen 1 and lots of static
Best answer by Stanley_4
Play some music that has the static, submit a diagnostic and call support, they can see internal data we can't.
If nothing else trade it using the 30% upgrade deal you should qualify for.
I used my Connects for many years with no issues, but into an AVR not powered speakers.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
The CONNECT:AMP Gen 1 is a pretty old, and low powered (when compared to the Sonos Amp) device, and we don’t know either the source of the music you’re playing, or the impedance/ power requirements of these speakers.
Can you share some of that?
I certainly don’t recall a lot of complaints regarding static with the old CONNECT:AMP gen 1s, in general.
The CONNECT:AMP Gen 1 is a pretty old, and low powered (when compared to the Sonos Amp) device, and we don’t know either the source of the music you’re playing, or the impedance/ power requirements of these speakers.
Can you share some of that?
I certainly don’t recall a lot of complaints regarding static with the old CONNECT:AMP gen 1s, in general.
Do an Internet search, there are numerous threads regarding Connect Amps and static. These are KRK Rokit 5” and 8” speakers. They both have built-in amplifiers.
Whoa’ there cowboy 😊
The KRK Rokit line of speakers are Powered. They are not designed to be used with any Sonos Amp. You need a Sonos Connect (discontinued) or Sonos Port. You would use the RCA cables connected to the Connect or Ports line-out to speakers line-in.
Whoa’ there cowboy 😊
The KRK Rokit line of speakers are Powered. They are not designed to be used with any Sonos Amp. You need a Sonos Connect (discontinued) or Sonos Port.
My mistake, it is a Sonos Connect, not “Amp”. Like this one:
There’s not much Sonos can do unless the previous owner didn’t use the upgrade credit which you can if it is registered to you as owner. If you bought from Amazon you may be able to return it for exchange.
There’s not much Sonos can do unless the previous owner didn’t use the upgrade credit which you can if it is registered to you as owner. If you bought from Amazon you may be able to return it for exchange.
There is no previous owner. I bought these many years ago. Didn’t buy them from Amazon, I don’t recall where I bought these from. There has always been an issue with static, as long as I recall.
Play some music that has the static, submit a diagnostic and call support, they can see internal data we can't.
If nothing else trade it using the 30% upgrade deal you should qualify for.
I used my Connects for many years with no issues, but into an AVR not powered speakers.
Play some music that has the static, submit a diagnostic and call support, they can see internal data we can't.
If nothing else trade it using the 30% upgrade deal you should qualify for.
I used my Connects for many years with no issues, but into an AVR not powered speakers.
I followed the link below regarding the 30% upgrade, and found no option to actually upgrade.
There’s not much Sonos can do unless the previous owner didn’t use the upgrade credit which you can if it is registered to you as owner. If you bought from Amazon you may be able to return it for exchange.
There is no previous owner. I bought these many years ago. Didn’t buy them from Amazon, I don’t recall where I bought these from. There has always been an issue with static, as long as I recall.
OK…I understand. I still suggest you log into your account on the Sonos website to see if there is an upgrade credit. Beyond that hopefully someone else will see this thread and offer some advice/assistance.
Does this noise level track CONNECT’s Volume control? Are you playing something connected to Line-In or are you playing online music? As a test, if you have something connected to Line-In, set the CONNECT’s Volume to zero and disconnect this device. Does the noise stop?
Play some music that has the static, submit a diagnostic and call support, they can see internal data we can't.
If nothing else trade it using the 30% upgrade deal you should qualify for.
I used my Connects for many years with no issues, but into an AVR not powered speakers.
I followed the link below regarding the 30% upgrade, and found no option to actually upgrade.
You need to login then click your “My Account” icon and the option is there:
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.