Skip to main content

I am struggling with how I’m going to bring wiring through stucco wall (no attic or basement) for the amp to be inside my living room. Any ideas would be greatly appreciated 

Drilling through a stucco wall is simple enough. Simpler if you get the right drill bit for the job.

You will also want wire shields on both ends of the wire to avoid abrading it on rough edges.

Note the hole in the bit for pulling the wire back through the hole, far easier than trying to fish it through after you have removed the bit.

First hits to get you a picture, shop around.

https://www.amazon.com/Bosch-BH2003T-18-Installer-Bit/dp/B00L2592OM/ref=sr_1_6

https://www.amazon.com/Through-Bushing-Insert-Protector-Wire/dp/B00UD076EK/ref=sr_1_5

Thank you 

Terms & ConditionsCookie settings