Answered
Connect Amp Subwoofer out
+2Right now I'm just using speaker wire to include my subwoofer in my Connect Amp setup. I go from the Connect Amp, loop thru the subwoofer and then to my speakers. But I would like to take advantage of the subwoofer out connection on the Connect Amp. Do I just go RCA from the connect amp to the LINE in on the subwoofer? No speaker cable involved? Just go to the Left LINE in? I have an Acoustic Research S112PS. Thanks for your help. - Arnie
Best answer by ratty
Correct. Wire the Connect:Amp subwoofer output to one of the RCA preamp-level inputs on the sub.
Set the sub's low-pass filter to its highest frequency. The C:A will apply its own crossover.
You'd obviously wire your main speakers directly to the C:A.
Set the sub's low-pass filter to its highest frequency. The C:A will apply its own crossover.
You'd obviously wire your main speakers directly to the C:A.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Correct. Wire the Connect:Amp subwoofer output to one of the RCA preamp-level inputs on the sub.
Set the sub's low-pass filter to its highest frequency. The C:A will apply its own crossover.
You'd obviously wire your main speakers directly to the C:A.
Set the sub's low-pass filter to its highest frequency. The C:A will apply its own crossover.
You'd obviously wire your main speakers directly to the C:A.
+2Excellent. Thanks so much Ratty.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.