Hi old man bakke



Alexa has nothing to do with you adding Play 3's to your Beam. If Alexa was already setup for the Beam all you were doing is bonding the play 3's to your Beam as surrounds. Once that was done all you need do is say " Alexa discover devices". It will probably respond as no new devices were found as the Play 3's are bonded as surrounds and are not stand-a-lone speakers.



If you want the Play 3's to show as speakers in Alexa you must set them up as individual speakers named as a room; or as a stereo pair named as a room. After doing one of the aforementioned you would ask Alexa to discover devices. They should then appear in the Alexa app under devices.



If anything is off-line in the Alexa app close it and re-open it. If they still show as off-line make sure you can access your speakers via the Sonos app. If all is good close all apps on your device, reboot and open Alexa to see if you can view your devices as being on-line.



Let us know if you need additional assistance. Cheers!

---

I understand that the Alexa has nothing to do with the addition of speakers, however something occurred when I added them. Alexa worked fine prior to the bonding of the Play3 as surround. I do not want them as stand alone speakers but as surround to the beam.



I get no response from Alexa at all now.



I will I’ll try the later solution you mentioned too.

---

Figured it out. Somehow Alexa was logged off after the process. Just had to log the old brawd back in!



thanks !!

---