Answered

Connection Issue

3 years ago
February 9, 2022
6 replies
103 views

J

Jimmy the saint
Trending Lyricist I
13 replies

I have 4 speakers.

I can group 3 together my one, play:1 and beam and I have no issues.

When I add my symfonisk table lamp to the group the music cuts out or stops altogether.

All 4 speakers are within 7 or 8 meters of my wifi hub.

Any ideas??

Best answer by Ken_Griffiths

Perhaps try a different WiFi channel & channel-width on your router. I suggest fixing the 2.4Ghz band to a non-overlapping channel 1, 6 or 11 and set a channel-width of 20MHz and see if that solves the issue. If applicable, do the same if running on a SonosNet signal too, but set the SonosNet channel so that it is different to your chosen 2.4Ghz non-overlapping WiFi channel. See if that resolves your grouped-rooms issue.

You can try each of the three channels on the router to see which works best for your environment, but give each one at least half-hour to settle down.

View original

Did you find what you were looking for?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

Ken_Griffiths
21949 replies
Answer
3 years ago
February 9, 2022

Perhaps try a different WiFi channel & channel-width on your router. I suggest fixing the 2.4Ghz band to a non-overlapping channel 1, 6 or 11 and set a channel-width of 20MHz and see if that solves the issue. If applicable, do the same if running on a SonosNet signal too, but set the SonosNet channel so that it is different to your chosen 2.4Ghz non-overlapping WiFi channel. See if that resolves your grouped-rooms issue.

You can try each of the three channels on the router to see which works best for your environment, but give each one at least half-hour to settle down.

J