Skip to main content
jonathanburkett
Trending Lyricist I
May 10, 2024
Question

Trying to set up a new Symfonisk to an existing network, and it won't finalize the connection. Any ideas or suggestions?

Just got a new Symfonisk and trying to connect it to my system. Currently have a Playbar + Sub set up in a TV room and a Five in the the living room. 

Have been going through the new app to set up the Symfonisk and have tried almost everything. Have had it do the chimes, though won’t finalize. Have typed the device number after that, which always fails. Have connected to the router via Ethernet directly, using a new connection and even using the ethernet cable I have set up with the Playbar. All fails. 

I’m ready to smash this thing out of frustration and the small satisfaction I may get. This is truly horrible, and Sonos Support gives me a bot that only repeats itself with no actual solutions/suggestions and a phone number that has an 80minute wait. 

Really hoping someone has a suggestion or maybe has gone through similar and had success. 

    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    77 replies

    Show previous replies
    Ratty99
    Trending Lyricist I
    June 6, 2024

    Wow, so I have just bought a new symfonisk today and now beginning to wish I hadn't!!

     

    so I have a mix of sonos 1s, a roam and 1 symfonisk bookshelf, the new one is to make a setero pair with the existing one. 

    I have the latest version of android app from June3rd, 

    80.02.05  release +20240603.d1da1be

    Can anyone confirm if this is going to work out of the box on wifi, or am I facing the crazy prospect of messing around for hours like everyone else in this thread?

     

    Cheers, heres hoping, PS, the new app is a total disaster, just adding my vote. 

      jonathanburkettAuthor
      Trending Lyricist I
      June 6, 2024

      While can’t promise a out of the box success, I do think there are quite a few that have found solutions. Hopefully, its even a bit better than what we all did with newer updates. 

      Christoff17
      Lyricist III
      June 6, 2024

      The latest Sonos app update resolved the issue for me. After updating the app today, I had to factory reset the symfonisk table lamp and then re-connect it successfully. System is now working correctly - all good. 

        Ratty99
        Trending Lyricist I
        June 6, 2024

        Great thanks, I'll give it a try

          Ratty99
          Trending Lyricist I
          June 8, 2024

          All good, added without any drama, think latest update might have put this glaring error to bed.

            Dendritic Axon
            Lyricist II
            June 9, 2024

            I wonder what IKEA thinks of the IKEA branded “ sonos “ equipment.

            the lack of customer focus at Sonos regarding the new app subject, and Ikea customers facing all kinda issues. Can imagine IKEA will adress this to board level.

            Not an employee of either firm so this is just a guess, but I doubt IKEA manufactures these. More likely, they have an agreement with Sonos to produce them and then they co-brand them so they look like IKEA products.

              Alexander_somethingunique
              Lyricist I
              July 12, 2024

              Ill cross post my solution:

              Thought I’d add my two cents to this and tell you what SOLVED the issue for me: changing WiFi router settings.

              Short story: IKEA Symfonisk could be “added” to my Sonos system (already had a Move) using the Mobile App, but not recognized (so no functionality). Tried updating the Sonos system using the PC app as suggested by others, didn’t fix it. Contacted local Sonos support (they were very friendly and helpful)  - after trying all their tricks they suggested it could be an issue with my Wifi router.

              So I called my internet and router provider, and turned our they had a list of recommended Wifi router settings to make Sonos work. They helped me ensure that the Wifi settings were as follows:

              1. 2.4 GHz must be activated.

              2. The SSID for 2.4GHz and 5GHz WiFi networks must be unique (ie. distinct IDs/names. If not previously enabled, it may be wise to keep the 2.4 Ghz name the same as the old name to make existing systems recognize it and label the 5Ghz channel as XXX_5G).

              3. Client AP isolation should (likely) be OFF.

              4. Use “b/g mode” for the 2.4 Ghz .

              5. Use WPA2/AESK

              6. WiFi channel should be in “LOCKED” mode.

              7. Airtime fairness should be OFF

              8. WPS should be OFF

              9. Ipv6 setting STATEFUL. (as opposed to stateless)

              10. Channel width: 20MHz.

              (settings 2, 4, 6 and 10 were “incorrect” on my Wifi)

              After changing setting and reconnecting to the Wifi (the 2.4 Ghz channel), initially the Symfonisk wasn’t recognized in the Mobile App. using the Sonos PC App now solved it: If I remember correctly, I unplugged and reconnected the IKEA Symfonisk, clicked the Reset Controller (Help menu) in the PC app, and then “connect to existing system”. The app asked me to update the system and I clicked OK. After that, it was possible to recognize the Symfonisk in the Mobile app (under System settings).

              The Symfonisk and the Move speaker now work perfectly using the Mobile App (knock on wood)!

                Terms & ConditionsAccessibility statement