Skip to main content
Contributor I
Dec 5, 2021 10:40 PM UTC
Answered

Trouble Configuring Play 5 (2nd Gen) over Wifi

Hi,

I’m trying to setup my Play5 (2ndG) after a while not using it - it worked fine the last time I used it but I have reset my wifi password etc since so I decided to start from scratch. 

  • Factory reset the Play 5
  • Latest version of IOS on my iPad
  • Reset the Sonos App (v2)

My attempt goes as follows

  • The Play 5 is flashing green
  • Open the Sonos App, accept License conditions etc. Login the Sonos
  • The app immediately finds the Play 5, I click ‘Add’
  • “Getting Play 5 ready”...
  • Goto Accessories setup to connect
  • “Preparing” “Gathering info about your network”
  • Shows my the network and the accessory name “Sonos Play 5” so I hit next
  • “Setting up accessory to join NETWORK”…
  • “Waiting for Sonos Play 5 Black”…
  • (Still flashing green)
  • “An unexpected error occurred try again”

Trying again results in exactly the same and this all happens in exactly the same way when using my iPhone instead of the iPad.

Any ideas?

Cheers

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Contributor I
Dec 6, 2021 6:58 PM UTC

Figured it out in the end. It turns out the wrong MAC address was whitelisted - which is really weird, maybe I made a mistake whilst typing them out during the last router reset.

Oh well, it’s working fine now. Thanks for all the suggestions!

11 replies

AjTrek1
Dec 5, 2021 10:47 PM UTC

First of all you must have done more than just change your password for WiFi. You must have also changed the SSID  as well. How long has the speaker been moth-balled?

Translate
Together Everyone Achieves More = T.E.A.M.
Contributor I
Dec 5, 2021 10:56 PM UTC

A while. I can’t remember exactly but definitely a few months or more (it’s a bedroom unit and I just haven’t been listening to music / using music alarms in there for a while).

I have had to factory reset my router a few times which resets the SSID however I always change it back to the same one. I do have the SSID hidden and use MAC filtering (yes the Play 5 MAC is white-listed) but that hasn’t been an issue before.

Translate
Airgetlam
Dec 5, 2021 11:00 PM UTC

Might be easier to wire the PLAY:5 temporarily to your router with an Ethernet cable, get it updated, and once it’s up to date, then move it to wireless. 

Translate
Bruce
AjTrek1
Dec 5, 2021 11:02 PM UTC

Try moving closer to your router for initial setup. Once setup you can move it to the desired location. One more question… do you have range extenders or access points in your network?

Translate
Together Everyone Achieves More = T.E.A.M.
Contributor I
Dec 5, 2021 11:03 PM UTC

That’s going to be a right pain given my setup (it’s mounted on a stand that it’s locked into) but I guess I’ll give it a go !

Translate
AjTrek1
Dec 5, 2021 11:09 PM UTC

Since you are moving closer to your router consider @Airgetlam suggestion.

Translate
Together Everyone Achieves More = T.E.A.M.
Contributor I
Dec 5, 2021 11:23 PM UTC

The Ethernet connection did result in an update. 

Afterwards (back on Wifi, connecting on iPhone) I got as far as the “Join Sonos network” phase but it can’t join said network for some reason...

Translate
AjTrek1
Dec 5, 2021 11:31 PM UTC

The Ethernet connection did result in an update. 

Afterwards (back on Wifi, connecting on iPhone) I got as far as the “Join Sonos network” phase but it can’t join said network for some reason...

That suggests that the network card maybe failing in the Play5. Suggest you contact Sonos tech support. Normally I’d say run a diagnostic but since the speaker is not on your network doing so may be for naught. But you can still run it and post the reference ID in your next post. 

Translate
Together Everyone Achieves More = T.E.A.M.
Contributor I
Dec 5, 2021 11:52 PM UTC

Bizarrely it let me run one earlier : Ref 657478373

Translate
ChambreNoireAuthorAnswer
Contributor I
Dec 6, 2021 6:58 PM UTC

Figured it out in the end. It turns out the wrong MAC address was whitelisted - which is really weird, maybe I made a mistake whilst typing them out during the last router reset.

Oh well, it’s working fine now. Thanks for all the suggestions!

Translate