Skip to main content
Contributor I
Jan 29, 2023 7:35 PM UTC
Answered

Successful Turntable Connection?

Has anyone successfully connected a turntable to a Sonos Play 5??? We’ve tried two different turntables, cords, preamps etc and the sound quality is terrible on all of them. Please let me know which turntables you’ve had success with! So far we’ve tried Fluance and Audio-Technica. Thanks!

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
buzz
buzzAnswer
Grand Maestro
Jan 29, 2023 8:27 PM UTC

Make sure that the plug is fully seated in the FIVE’s Line-In Jack.

10 replies

buzz
Grand Maestro
Jan 29, 2023 7:58 PM UTC

This could easily be a turntable setup issue. Can you describe how the sound is “terrible”?

Translate
Contributor I
Jan 29, 2023 8:03 PM UTC

I can’t really hear lyrics at all. With the Fluance and preamp the sound improved if we disconnected the either the red or white cable from preamp. I spent a couple hours with Fluance trying to trouble shoot before trying another turntable. With the Audio-technica it’s the same sound issue and the Sonos speaker is vibrating a lot. Sonos speaker seems to be the common denominator.

Translate
Belly M
Jan 29, 2023 8:07 PM UTC

The Sonos line in level plays quite a major part in this, personally found it needs to be around level 9 or higher as long as everything else on the TT / preamp is correct.

Translate
buzz
Grand Maestro
Jan 29, 2023 8:08 PM UTC

Likely the cartridge is incorrectly wired.

Translate
buzz
Grand Maestro
Jan 29, 2023 8:13 PM UTC

With the Audio-Technia you may have an acoustic feedback issue. Try to avoid placing the turntable and FIVE on the same shelf.

Translate
Contributor I
Jan 29, 2023 8:17 PM UTC

The line in level is set to 10. Fluance checked the pins on the cartridge and everything was ok. 

Translate
buzz
buzzAnswer
Grand Maestro
Jan 29, 2023 8:27 PM UTC

Make sure that the plug is fully seated in the FIVE’s Line-In Jack.

Translate
Belly M
Jan 29, 2023 8:35 PM UTC

The line in level is set to 10. Fluance checked the pins on the cartridge and everything was ok. 

Could try all the levels as the preamp might have a very high output.

Translate
Contributor I
Jan 29, 2023 8:36 PM UTC

Thank you, buzz! I pushed hard but apparently not enough. It’s working now.

Translate
Belly M
Jan 29, 2023 8:38 PM UTC

Ha ha… simple things!

Translate