Skip to main content
Feb 17, 2024 7:13 PM UTC

Sonos Version 16.0 build 77449290 issues

My system upgraded to Sonos Version 16.0 build 77449290 issues.

Since then ….

  1. … adding multiple rooms when playing music is very slow it takes sometimes up to a minute when adding more then one room at once. music is jumping in and out due to reconnecting,
  2. … on the iOS app selecting a room and confirm the selection results into nothing. When open the dialog again, the selection I did before did not get acknowledged and is gone.

I never had this issue with the 15.x versions. It is again a new issue. Please test your firmware before releasing it.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

11 replies

106rallye
Feb 17, 2024 7:20 PM UTC

An update makes all your Sonos devices start up in a short period of time. Some routers get confused by this, which can lead to the problems you describe. You could try to take the power off all your Sonos devices and your router and start everything up again one by one, starting with the router.

Translate
Stanley_4
Grand Maestro
Feb 18, 2024 2:24 AM UTC

If the sequenced power-up works consider adding static/reserved IP addresses to avoid this next time. Usually easily done from your router’s DHCP settings page.

Translate
Trending Lyricist I
Feb 19, 2024 9:00 PM UTC

sound bar and sonos sub,  drops off and wont joint with amp or playbar. When joined it drops off playbar is wired  Any suggestions

 

Translate
Trending Lyricist I
Feb 19, 2024 9:06 PM UTC

Im having same issues. Things are getting worse!  I am ready to boot the 17 pieces that have.  I purchased all new amps. everything is hard wired through a dumb switch and I reboot the entire house.

 

  1. Grouping and ungrouping doesnt work or takes many retries.
  2. Original sonos playbar (also wired) is paired with black sub. Streaming or local music on NAS stop , but stay on the sonos amp, but playbar and sub drop off. 
  3. It was mentioned v16 would fix this, but now worse. Any suggestions. 

I would hold off on sonos purchases unless  we start seeing postings that say “problem resolved”

Translate
Airgetlam
Feb 19, 2024 11:50 PM UTC

If you didn’t have all the Sonos powered off when you rebooted the router, you didn’t get all the benefit of the process. Although it might be simpler for you to reserve IP addresses for your Sonos devices in your router. Wired or WiFi, duplicate IP addresses can happen. 

Translate
Bruce
Lyricist I
Feb 23, 2024 9:21 PM UTC

So I've just had complete failures across my SONOS setup, for the past THREE hours been trying to get it all working and seems it's because SONOS have updated software 🙄

 

Nice one, yet another reason I'm thinking about chucking the whole setup. Honestly it's getting worse having SONOS now. 

Translate
Airgetlam
Feb 23, 2024 9:39 PM UTC

Not really enough information to begin to point you in any possible direction. 

Random suggestion; wire one Sonos device to your router with a Ethernet cable, temporarily. 

Another random suggestion: look at your router’s manual, and set up reserved IP addresses for your Sonos devices (frankly, any ‘permanent’ device in your home). This might make a difference, with wired, SonosNet, or WiFi connections. 

Translate
Bruce
Lyricist I
Feb 23, 2024 9:41 PM UTC

I've literally turned everything off barring the playbar which is now connected via ethernet, keeps stopping when it attempts to update playbar with error code 800

 

Nothing re broadband has changed

Translate
Airgetlam
Feb 23, 2024 9:47 PM UTC

I’m not familiar with an error code 800. However, Sonos has an FAQ for that error. 

Things they don’t mention, but I would still check for is VPN, port blocking, DNS issues, work profiles, or virus protection programs which might keep the Sonos speakers from reaching the Sonos update servers. 

Have you tried to call Sonos Support directly to discuss it?

When you speak directly to the phone folks, they have tools at their disposal that will allow them to give you advice specific to your network and Sonos system.

Translate
Bruce
Lyricist I
Feb 24, 2024 9:11 PM UTC

I’ve been on chat for an hour two times now, both times failed to sort this. Tried my other speakers and they have managed to go on. But the Playbar both via wifi & ethernet will not register yet it’s on my account.

 

To say I’m frustrated that it just decided to do this yet it’s something to do with my internet / home is unbelievable.

 

So I’m stuck with my playbar at “not registered” and white light and I can’t help think it’s this wonderful update

Translate