Skip to main content
Contributor I
Mar 10, 2023 5:29 PM UTC
Answered

SONOS 5 Gen 2 share with SONOS controller 2 and hard wired connect 1 jack plug

Hi - Can you share a Gen 2 SONOS 5 speaker with Gen 2 Controller (for general use) and Gen 1 controller connected *via the jack plug* for occasional use ? 

I want to use the Gen 1 controller and Gen 1 CONNECT hard wired and fitted to my turn table AND when that’s not in use use the Gen 2 controller on the SAME 5 Gen 2 speaker - without having to unplug the jack plug ?   Thanks in advance.       

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
jgatie
jgatieAnswer
Mar 10, 2023 10:38 PM UTC

It can, but unless you set the Connect to fixed output, you are going to have a dueling volume problem.  Meaning the volume on the 5 or the volume on the Connect will have to be raised to full in order for the output on the 5 to match what you hear from other sources.  Personally I'd just go direct from turntable to the Five's line-in.  That's what it's made for.

6 replies

jgatie
Mar 10, 2023 5:41 PM UTC

Sure.  But it begs the question: Why use the Connect when you can connect the turntable directly to the Line-In on the Play:5 Gen 2?

Translate
cherry0Author
Contributor I
Mar 10, 2023 9:30 PM UTC

That’s what I want/will do - just being over cautious because but I don’t want to damage the Play5 internals - Can the Pay 5 share both the Gen 1 connect and Gen 1 controller direct input and, when that’s not active, still be controlled by the Gen 2 controller WiFi ?   

Translate
jgatie
jgatieAnswer
Mar 10, 2023 10:38 PM UTC

It can, but unless you set the Connect to fixed output, you are going to have a dueling volume problem.  Meaning the volume on the 5 or the volume on the Connect will have to be raised to full in order for the output on the 5 to match what you hear from other sources.  Personally I'd just go direct from turntable to the Five's line-in.  That's what it's made for.

Translate
cherry0Author
Contributor I
Mar 14, 2023 7:14 PM UTC

Update ; Finally got the cable.  So the CONNECT is Gen 1 and configured within SONOS 1 and plugged directly into the back of the 5.  Sound source is the turntable.  But no sound. 

The 5 is configured within SONOS 2 along with all the other Gen 2 stuff. 

So how do I share the 5 between hard wired connect Gen 1 and Gen 2 controllers ? 

Translate
jgatie
Mar 14, 2023 7:51 PM UTC

Again . . . Why are you doing this?  The Connect serves absolutely no purpose in that setup, the only thing it can do is complicate things (as you have seen).  Connect the turntable directly to the Line-In on the Play:5 Gen 2.  You aren’t going to harm anything, so there is no need to worry about the “Play5 internals”. 

Translate
cherry0Author
Contributor I
Mar 15, 2023 11:58 AM UTC

Deep joy - thanks for your support.  Turntable works fine without the CONNECT.  I’ve now got two redundant CONNECTs going on eBay !! Thank you. 

Translate