Hi everyone,
I'd like some advice on how best to connect two Play 5 (gen1) as a stereo pair in our garden house.
This garden house has an Access Point (connected to our router via WLAN in our main house) that allows WLAN connection and wifi connection.
Do I need to connect both speakers via a WLAN cable or can one speaker function as a router for the other speaker? What should I then do with the wifi on each speaker?
Best answer by Ken_Griffiths
View original
The Sonos System requirements are shown here:
https://support.sonos.com/en-us/article/sonos-system-requirements
I would note the section on unsupported network configurations as any network using wireless range extenders are not supported but may work in some instances.
I would set the extender to broadcast the same SSID and use the same credentials, channels and channel-width, as your main router - ideally set the channel-width to 20Mhz only on the 2.4Ghz band and use a ‘fixed’ non-overlapping channel, either 1, 6 or 11.
To setup the Play:5’s (from factory reset state) you will need the S1 Sonos controller App installed on a compatible mobile controller device. Simply open the App and follow the on-screen instructions to setup the Sonos system.Household. That’s assuming you do not have an existing Household that you wish to use?
The mobile controller device requirements are shown here…
https://support.sonos.com/en-us/article/sonos-app-requirements
The S1 App can be downloaded from here:
https://support.sonos.com/en-us/downloads
When the device setup is complete you can then add your chosen music services to the App for playback on your speakers, which can each be used standalone, grouped or stereo paired.
Some further links you may find helpful:
https://support.sonos.com/en-us/home
https://support.sonos.com/en-us/article/add-a-music-service-to-sonos
Hope that assists.👍
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.