Skip to main content
Contributor I
Apr 28, 2023 3:18 PM UTC
Answered

Not able to connect other Sonos speakers to wired Sonos

Hi,

 

I have a Sonos Play:5 (Gen2) in the kitchen which I have connected to LAN. Then I have a Soundbar, a sub and two One in the living room as a surround system.

As I understand, it should be possible to get other Sonos units to connect to a wired Sonos unit, but this seems not to be working with my system. I have tried to switch everything off, even the router, but the livingroom system wont connect to the wired unit.

Any advice from anyone?

Thank you.

 

Moderator edit: changed “Sonos 5” to “Sonos Play:5 (Gen2)” for clarity.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
106rallye
106rallyeAnswer
Apr 28, 2023 5:06 PM UTC

Older Play 5’s are prone to wifi card failure, so that could be the problem. With a failed wifi card it could not initiate a Sonosnet. You could make a diagnostic and call Sonos.

Just a question though. How did you conclude the system did not shift to Sonosnet.

11 replies

Stanley_4
Grand Maestro
Apr 28, 2023 4:19 PM UTC

What happens if you pull the Ethernet from the Play 5?

 

Translate
106rallye
106rallyeAnswer
Apr 28, 2023 5:06 PM UTC

Older Play 5’s are prone to wifi card failure, so that could be the problem. With a failed wifi card it could not initiate a Sonosnet. You could make a diagnostic and call Sonos.

Just a question though. How did you conclude the system did not shift to Sonosnet.

Translate
Contributor I
Apr 28, 2023 5:11 PM UTC

What happens if you pull the Ethernet from the Play 5?

 

It will reconnect to the wifi. I am trying to get all Sonos on Ethernet, since there are so many devices in the house using wifi.

Translate
Contributor I
Apr 28, 2023 5:15 PM UTC

Older Play 5’s are prone to wifi card failure, so that could be the problem. With a failed wifi card it could not initiate a Sonosnet. You could make a diagnostic and call Sonos.

Just a question though. How did you conclude the system did not shift to Sonosnet.

I can see what is wired and what is wireless on the UI for the router.

I will try to see if I can get one of the other units to create a Sonosnet.

How do I know if it creates a net?

Can I see that in the app?

 

Translate
Contributor I
Apr 28, 2023 5:27 PM UTC

Hi Sonos,

I have sent diagnostic report no. 1265525813.

 

Please advise if there is any issue, thank you.

Translate
Stanley_4
Grand Maestro
Apr 28, 2023 7:23 PM UTC

If all connect over WiFi but don’t communicate when one is wired I’d lean to a switch/router issue between the wired port and the WiFi.

In the About My System screen what does the Associated Product IP address show as you connect/disconnect the Ethernet?

Translate
Contributor I
Apr 28, 2023 7:51 PM UTC

If all connect over WiFi but don’t communicate when one is wired I’d lean to a switch/router issue between the wired port and the WiFi.

In the About My System screen what does the Associated Product IP address show as you connect/disconnect the Ethernet?

Hi Stanley_4,

the Associated Product IP changes from the Play:5 IP and to the Playbar IP. 
 

Seems like the wifi card on the Play:5 is working since it is connecting to the wifi network.

Translate
106rallye
Apr 28, 2023 8:15 PM UTC

The best way to see if Sonosnet is active would be to check the WM status: https://support.sonos.com/en/article/check-if-sonos-is-in-a-wireless-or-wired-setup#

Translate
Stanley_4
Grand Maestro
Apr 28, 2023 8:44 PM UTC

I’m really leaning towards a switch/router issue here. Seems like everything is working but the communications between the Ethernet and WiFi.

Could you run a temp Ethernet to the PlayBar?

Translate
Contributor I
Apr 28, 2023 9:08 PM UTC

I’m really leaning towards a switch/router issue here. Seems like everything is working but the communications between the Ethernet and WiFi.

Could you run a temp Ethernet to the PlayBar?

After connecting the Playbar to Ethernet, all speakers are connected through Ethernet. They are all WM0, i.e. in a wired setup. Non connected to the wifi on the router.

 

I had misunderstood something as I thought it was not possible to use a system set in surround or entertainment as wired, but is think it is for the additional units in the surround system.

why does it not work to setup with play:5? Some settings in the router?

 

Thank you for the help both!

Translate