Skip to main content
Contributor I
October 18, 2018
Answered

music stops for few seconds just after starting

my Sonos has some troubles lately. 3x Sonos 1 and 1 Sonos 5.

Music takes some time to load, plays for 2-3 seconds and that waiting for about 5 seconds and then continues.

WiFi in my network seems ok, 3 UniFi access points throught the house all wired to the router.

What could be the problem?

I sent in a diagnosis to Sonos: number 947289968

Anyone have suggestions?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Edward R
Edward RAnswer
Retired Sonos Staff
October 19, 2018
Hi, trekker25. Chris notified me as to your diagnostic - thanks, Chris!

Unfortunately the diagnostic came up blank, thus suggesting network congestion. What channels are your access points on? What about Sonos? Can you flip the Sonosnet channel in the Sonos controller, then submit another diagnostic? Then, just to be sure, can you please reboot your Sonos device(s), then your AP's, then attempt to submit a diagnostic once again, and once more, respond with the confirmation number?

With regards to the above, you may even find that by moving the channels around, you remedy the issue.

Many thanks in advance, this should enable us to get some insight as to your system.
Try searching our articles for help with your question: https://www.sonos.com/en/support

13 replies

Chris
Lead Maestro
October 18, 2018
So you have no Sonos units hooked to the router? Just running off the normal wifi?

You could have an IP address conflict … if you haven't before have I would recommend going in and assigning all of your Sonos units NEW permanent IP addresses in router and reboot them and router.
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
trekker25Author
Contributor I
October 18, 2018
All 3 have static ip bases on Mac address in router
192.168.1.15, 16, 17

So that is ruled out?

Also when selecting a new song Spotify in Sonos app, it takes 10 seconds to start. Symbol is on pause; wait 10 seconds and jump back to play (so no music playing). Press again play and starts almost instant. And then after a few secs it hangs for about 2-5 secs (buffer issue?)
Chris
Lead Maestro
October 18, 2018
Must be some interference or something doesn't like about an access point (Sonos will have to look at that diagnostic).

What happens if you wire one of them to router (using Sonosnet). Does it clear up then?
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
Chris
Lead Maestro
October 18, 2018
What is source of the music? Happen on multiple services?
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
trekker25Author
Contributor I
October 18, 2018
Spotify afaik. Only use radio streams and local.

Turned off igmp snooping on my unifi controller. Found that it could interfer.

Also switching radio channels is really slow? 5-10 seconds!
Will try if wired makes difference.
Edward R
Edward RAnswer
Retired Sonos Staff
October 19, 2018
Hi, trekker25. Chris notified me as to your diagnostic - thanks, Chris!

Unfortunately the diagnostic came up blank, thus suggesting network congestion. What channels are your access points on? What about Sonos? Can you flip the Sonosnet channel in the Sonos controller, then submit another diagnostic? Then, just to be sure, can you please reboot your Sonos device(s), then your AP's, then attempt to submit a diagnostic once again, and once more, respond with the confirmation number?

With regards to the above, you may even find that by moving the channels around, you remedy the issue.

Many thanks in advance, this should enable us to get some insight as to your system.
Try searching our articles for help with your question: https://www.sonos.com/en/support
trekker25Author
Contributor I
November 12, 2018
Hi, trekker25. Chris notified me as to your diagnostic - thanks, Chris!

Unfortunately the diagnostic came up blank, thus suggesting network congestion. What channels are your access points on? What about Sonos? Can you flip the Sonosnet channel in the Sonos controller, then submit another diagnostic? Then, just to be sure, can you please reboot your Sonos device(s), then your AP's, then attempt to submit a diagnostic once again, and once more, respond with the confirmation number?

With regards to the above, you may even find that by moving the channels around, you remedy the issue.

Many thanks in advance, this should enable us to get some insight as to your system.


sorry for the late reply, was busy with a rebuild of my kitchen :-)

Send a new diagnosis:

number 1857107505

Can you check if you something odd in the logs?
Edward R
Retired Sonos Staff
November 19, 2018
Kitchen rebuilds can be a pain. Hope all went as planned! I can see precisely what the problem is. You appear to be using multiple access points all split across different channels, which is causing your Sonos devices to struggle to maintain a stable connection. This thread here provides some great advice and discussion. As it states, it's best to have all of your AP's on the same channel, which yours are not, at present. Keep me posted?
Try searching our articles for help with your question: https://www.sonos.com/en/support
trekker25Author
Contributor I
November 19, 2018
ok will try to have this fixed! See what is the best channel for my UniFy AP
trekker25Author
Contributor I
November 19, 2018
Kitchen rebuilds can be a pain. Hope all went as planned! I can see precisely what the problem is. You appear to be using multiple access points all split across different channels, which is causing your Sonos devices to struggle to maintain a stable connection. This thread here provides some great advice and discussion. As it states, it's best to have all of your AP's on the same channel, which yours are not, at present. Keep me posted?

i changed the channels and made a new diagnosis 348094556.

Can you check if you see any other problems?