Skip to main content
Enthusiast I
Dec 14, 2019 6:28 PM UTC
Question

Sonos Move power cord?

Just taken delivery of a Move and am disappointed to find that the charger socket, charger base and cable are all hard wired together.  I want to position the Move on some built-in desk furniture, where all the power sockets are located underneath, accessible through cutouts in the desk top.  Problem is neither the charger socket nor the base will fit through the cutout, so I am going to have to run the cable across the desk.  I realise I could probably use the USB-C charging point instead but then I’d lose the convenience of just being to pick up the Move and go when I want to take the music outside.

Normal way round this sort of problem would be to cut off the moulded power plug and fit another one back after running the cable through the cutout, but the plug on the Move is integral with the charger.  Since the charger base only has a two pin spring-loaded connection point to connect to the Move battery, my assumption is that the cable is ordinary twin core low voltage cable.  Is there any reason why I shouldn’t cut the cable and rejoin using ordinary cable jointing block, once cable has been passed through the desk cutout?

Seems like a simple solution, but don’t want to risk screwing up a fairly expensive new purchase.  Anyone got any reasons why it wouldn’t be ok? 

    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    19 replies

    Ryan S
    Retired Sonos Staff
    Dec 16, 2019 9:34 PM UTC

    Hi bjw10, maybe the community will chime in with some thoughts, I can’t recommend any modification of Sonos charging cables and will advice against it. I will pass on the feedback to the team that you wish the cable were able to be disconnected though.

    Translate
    Mark good posts by pressing the like button, and select the best answer on questions you've asked to help others find solutions.
    melvimbe
    Dec 16, 2019 9:37 PM UTC

    nevermind

    Translate
    Danny
    melvimbe
    Dec 16, 2019 9:44 PM UTC

    Any chance the cutout can be widened to fit the socket piece?   I agree with you that cutting and reconnecting the wires should work in theory.  I don’t have experience with this myself, so can’t advice more than that.

     

    I honestly would probably look for a better spot in the room if possible.  If using the desk, I would not want the speaker right there anyway.  If the desk has a hutch, perhaps the Move can be placed on top of the hutch?

    Translate
    Danny
    bjw10Author
    Enthusiast I
    Dec 17, 2019 12:34 AM UTC

    Hi Ryan S, thanks for taking the time to respond.  I do think it is rather surprising that the Move cable is so inflexible.  When I consider the numerous other bits of Sonos kit I have, I struggle to think of any that don’t have some sort of relatively small plug/connector at one end or the other. 

    Whilst I hoped you might pick up on the topic, I didn’t expect you to recommend what I am proposing to do.  But I sure would like to know (from anyone) if there is any fundamental reason why I shouldn’t do it….. at my risk, of course.

    I go out of my way to minimise surface mounted cables etc running around the house, which is why Sonos was such a revelation when it first appeared with wireless speakers, requiring only a power socket.  I really would like to keep as many cables hidden as possible.

    As for Melvimbe’s suggestions, I wouldn’t have posted this topic, if I hadn’t considered pretty much every other option.  Without going into massive amounts of detail, if he could see the situation here, it would be clear that enlarging the cutout is not an option.  And the Move is intended to replace an existing Play3 in that spot, which is the ideal location for many reasons.

    The alternative is to send back the Move and retain the Play3, without the option to take it outside.  Since I’ve been waiting for a Move type speaker from Sonos for quite some years, I’m not really losing anything by carrying on as before.

    Translate
    Airgetlam
    Dec 17, 2019 3:16 AM UTC

    When I modified the power cords for my PLAY:1s that I hung in my kitchen, I actually purchased Flexson power cables, and cut them up, rather than chancing messing up my Sonos cables. Now I have spare PLAY:1 cables in a drawer somewhere. 

    Translate
    Bruce
    bjw10Author
    Enthusiast I
    Dec 17, 2019 8:46 AM UTC

    Airgetiam, I don’t think that buying alternative cable is possible with the Move.  The power end comprises a small power brick with an integral uk plug and the whole thing measures approx 3.5 x 2.25 x 1.25 inches.  The other end of the cable is integral with the Move charging stand, which is broadly oval in shape measuring approx 6.5 x 5.5 inches at its widest/longest.  No real scope there for using any non-standard cables.

    Translate
    Lyricist II
    Dec 31, 2019 4:55 PM UTC

    @bjw10 curious what you ended up doing here. I, too, am dealing with the same issue, but hesitate to do something which may permanently damage the base (which costs $80 for a replacement). One would think that the power brick would fit through a standard cord grommet, but no dice. 

    Translate
    bjw10Author
    Enthusiast I
    Dec 31, 2019 5:15 PM UTC

    Hi gb13,

    The short answer is I have done nothing and have deferred the decision for now.  I wanted to make sure I am happy with the Move before making any permanent alteration to it.  So at the moment it sits in the same room, but in a location (that I don’t particularly like) where it can plug direct into a power outlet.

    Assuming I keep it, I think I have two options: It is the size of the UK plug that prevents it going through my desk cutout. It is only slightly too large and I reckon I could trim off the ears of the plug faceplate in order to let it pass through, without compromising either safety or the functioning of the plug supply.  The second option is my original thought of cutting and splicing/joining the cable.  I still can see no reason whatsoever for not doing this, but understand that Sonos are never going to recommend it as an approach.

    At the moment, whilst I like the Move, I am a bit wary of the actual v claimed battery life.  Mine doesn’t seem to run anywhere near 10 hours on levels well below 50%, which I think is the claimed life of one charge.  However, I am not sure that will prevent me keeping it, at which time I will decide on one of the above options.

    Hope this helps.

    Translate
    Lyricist II
    Dec 31, 2019 6:42 PM UTC

    @bjw10 sincerely appreciate your reply! Sounds as though we are in very similar positions. I have a USB-C cable charging the Move while I evaluate options. Please do let me know if you end up making cable modifications, and I’ll do the same. Hoping some product folks are paying attention here - some relatively minor modifications to the power cable/base would make a world of difference for folks like us. 

    Translate
    bjw10Author
    Enthusiast I
    Jan 1, 2020 1:32 AM UTC

    @gb13 I couldn't agree more.  The design of the power supply is pretty poor.  I can't imagine why anyone would do it like that, especially given the other products in the Sonos range.  Will let you know what I do in the end and hope you will do likewise.

     

    Translate