Skip to main content
lcarlson
Contributor I
July 3, 2022
Answered

ROAM connects to iPhone via bluetooth but doesn't appear as device in music

I’m traveling with my ROAM, so not on my home wifi-network (where all my other sonos devices are connecfed;  all other devices show in Sonos app on my phone, but wilth an error as they are not on the wifi where I’m at)

ROAM is connected on iPhone via bluetooth, but the device is never shown as a device option in the music apps so I can’t get the music to play through the ROAM.

How do I get the music being streamed on my iPhone (iOS 15.5)

No clue what firmware/version the ROAM is on -- have never had it connected to a wifi:  only time I ever try to make it work I’m away from home and can’t figure out if changing the network in my Sonos app will impact the home-based devices (that my husband is using).

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Ken_GriffithsAnswer
July 5, 2022

apparently one CAN pair it via Bluetooth when it’s not set up via the SONOS app.

I’ve just factory reset my Roam here and it doesn’t let me go into BT pairing mode, so that’s odd? Maybe it’s an older firmware, but I’ve never come across being able to do this, personally speaking.

Maybe that’s really my question:  can I switch the wifi my app is config’d with (my home wifi that all my other devices are synced to AND being used on) to set-up the ROAM without impacting the home-based devices and their operations?

OR - to avoid shutting down the home systems (which will negatively impact my husband’s ability to watch TV and my quality of life for the duration) do I need to wait until back home to set up ROAM on my normal wifi so it’s part of my SONOS app system?

You can set a (reset) Roam up quickly by doing it this way …

  • Reset the controller App, just for now, whilst you’re away from Home. (That’s done via ‘Settings/App Preferences’).
  • Connect your mobile device to a nearby accessible WiFi signal w/internet. So, just as an example, you could use a mobile WiFi hotspot from another phone that has mobile internet access 3G/4G etc. 
  • Open the Sonos App and click past the opening screens and ‘accept the T&C’s’ - Choose to create a ‘new’ system and go onto setup the Roam. When done, the App is finished with, just reset it again. When setting up BTW, use the same email/credentials as for logging into your own Home Sonos system, or the login you’re using to access this forum.
  • Now disconnect your mobile from the Wifi hotspot and BT pair your mobile to your Roam as outlined in this link: https://support.sonos.com/s/article/4989 and it will play the audio from the paired BT device.
  • On return Home, you simply connect your reset Sonos App back to the ‘existing’ Sonos System that you have there and if it suits, you can go onto reset/add your Roam to the Home system too, just like you would add any other new, or reset, Sonos device.

So it’s quite simple to do and I hope those few steps assist you to get the Roam up and running as a BT speaker until you manage to return Home.

View in thread

22 replies

Show previous replies
Ken_Griffiths
Ken_Griffiths
July 4, 2022

I thought ROAM needed to be set up as a ‘normal' Sonos speaker in the App before it could be used as a Bluetooth speaker?

This is my thought too. ROAM is not a generic Bluetooth speaker. If ROAM has not been formally setup as part of a SONOS system, I don’t know if it will be fully functional. Certainly, it will not have the latest firmware.

I’m sure a user can’t even activate Bluetooth pairing mode on a Roam that hasn’t been setup. All the rear button will do is power the device ON/OFF - but OP does say their "ROAM IS paired”… but perhaps they will post the screenshots requested and describe what the status LED is doing.

I will happily try to guide them through setup/registration if they can get their hands on a separate mobile hotspot that provides internet access, as that’s how my young grandson setup his Roam whilst camping in a field.

lcarlsonAuthor
Contributor I
July 5, 2022

apparently one CAN pair it via Bluetooth when it’s not set up via the SONOS app.

Maybe that’s really my question:  can I switch the wifi my app is config’d with (my home wifi that all my other devices are synced to AND being used on) to set-up the ROAM without impacting the home-based devices and their operations?

OR - to avoid shutting down the home systems (which will negatively impact my husband’s ability to watch TV and my quality of life for the duration) do I need to wait until back home to set up ROAM on my normal wifi so it’s part of my SONOS app system?

John B
July 5, 2022

The  Roam must initially be set up as part of a Sonos system before it can be used as a Bluetooth speaker. It can also then connect to another WiFi network.

But if you have just taken it out the box and tried to use it as a Bluetooth speaker,  that is where you went wrong. 

Ken_Griffiths
Ken_GriffithsAnswer
July 5, 2022

apparently one CAN pair it via Bluetooth when it’s not set up via the SONOS app.

I’ve just factory reset my Roam here and it doesn’t let me go into BT pairing mode, so that’s odd? Maybe it’s an older firmware, but I’ve never come across being able to do this, personally speaking.

Maybe that’s really my question:  can I switch the wifi my app is config’d with (my home wifi that all my other devices are synced to AND being used on) to set-up the ROAM without impacting the home-based devices and their operations?

OR - to avoid shutting down the home systems (which will negatively impact my husband’s ability to watch TV and my quality of life for the duration) do I need to wait until back home to set up ROAM on my normal wifi so it’s part of my SONOS app system?

You can set a (reset) Roam up quickly by doing it this way …

  • Reset the controller App, just for now, whilst you’re away from Home. (That’s done via ‘Settings/App Preferences’).
  • Connect your mobile device to a nearby accessible WiFi signal w/internet. So, just as an example, you could use a mobile WiFi hotspot from another phone that has mobile internet access 3G/4G etc. 
  • Open the Sonos App and click past the opening screens and ‘accept the T&C’s’ - Choose to create a ‘new’ system and go onto setup the Roam. When done, the App is finished with, just reset it again. When setting up BTW, use the same email/credentials as for logging into your own Home Sonos system, or the login you’re using to access this forum.
  • Now disconnect your mobile from the Wifi hotspot and BT pair your mobile to your Roam as outlined in this link: https://support.sonos.com/s/article/4989 and it will play the audio from the paired BT device.
  • On return Home, you simply connect your reset Sonos App back to the ‘existing’ Sonos System that you have there and if it suits, you can go onto reset/add your Roam to the Home system too, just like you would add any other new, or reset, Sonos device.

So it’s quite simple to do and I hope those few steps assist you to get the Roam up and running as a BT speaker until you manage to return Home.

John B
July 5, 2022

To pick up a couple of specific comments you made, the Roam need have no impact on your other speakers and certainly doesn't require shutting down your home network!

Most of the muddled thinking about the Roam in posts on this Forum arises from not grasping the difference between being connected to a WiFi network and being part of a Sonos system that is on that network.

    buzz
    buzz
    Grand Maestro
    July 5, 2022

    Once a ROAM has been properly setup as part of a SONOS system, any system, the Bluetooth pairing is a deal directly between the Bluetooth device and ROAM. In the case we are discussing here, there will be no coupling between the home SONOS system and the remote ROAM. And, the remote ROAM does not need WiFi or a SONOS controller (phone/pad needs WiFi for controller operation) while playing Bluetooth. 

      ToddAO
      Lyricist II
      July 12, 2022

      I’ve not had issues at all until we both upgraded to IPhone 13.   Roam was offline.  I did a factory reset.  Nada.  I did a factory reset and closed the Sonos app.  It appeared!   But only the Roam appeared.  Went through the steps, and it was there…. But none of my other speakers on the network were there.  Hard closed the app and WALLA! The system was back, sans the Roam. Tried the same multiple times.  It’s either I choose the Roam as my only speaker, or choose my multi $1000s) system.  
       

      Really Sonos?  It’s meant to be this difficult? And Roam can’t be plugged into the Network (can’t find my product help…smh). And yes, I have 3 speakers plugged in, cause Wireless is too sketchy with you,

       

      I was so close to buying another Roam and another PlayOne…. Calling it now….  No more purchases…have friends who have also moved to Bose for travel Bluetooth and can’t be bothered with Sonos’ lame excuses 

      John B
      July 12, 2022

      Went through the steps, and it was there…. But none of my other speakers on the network were there.  

      This is nearly always the result of the user setting up the Roam as a separate system by mistake, instead of adding it to the existing system.  What were ‘the steps’ that you went through?

      The fact that when you closed the app and went back into it the original 3 were there but not the Roam fits with this explanation.  The fact that you can now get only one or the other makes it seem like a racing certainty.

      The factory resets were unnecessary.  In fact, you took the Roam from being ‘offline’ to being ‘no longer part of the system’ by factory resetting, and so actually created the problem that you have subsequently made a hash of resolving.

      The Roam being offline was unquestionably completely coincidental to upgrade in controller devices and would probably have been resolved by powering the Roam off and on.

      I may be wrong, and i apologise if so, but this looks very much like user error to me.  In fact, ‘user error’ doesn’t seem to do it justice.  ‘Complete user ****-up’ captures it better, I feel.

      PS..  What has your post got to do with this thread anyway?

        ToddAO
        Lyricist II
        July 13, 2022

        Sorry, I went through every step of on/off, etc a dozen times before I resorted to a factory reset.  I’m not lying. At least a dozen times.  And interestingly, it would still play what the rest of the system was playing,  but still showed as “offline” before I did anything.  I just couldn’t adjust it, nor play just it.

        And yea, always blame the user   That really helps customer loyalty   I even read ALL the forums and it points to a crappy roll out.  It’s not the first time Sonos has done this   I guess I should count myself lucky that we had a good 3 year run of good connections   Lord knows it was a $hit$how based on the user forums I’ve read on Roam   
         

         Not my first time at the Sonos rodeo.  
         

        so, a factory reset is like buying a new Roam   Where is the “ease of set up”   The damn thing should be completely virginal now and “just connect” like it did the first time.  So tell me, other than blaming me, what are my next steps? It’s no longer on my Network.  So why can’t this beautiful factory reset product connect!!??

         

         

         

        ToddAO
        Lyricist II
        July 13, 2022

        Nice solve score John, so

        help me solve this?

         

         

        Show more replies
        Terms & ConditionsAccessibility statement