Skip to main content
Contributor I
Jun 22, 2015 10:45 AM UTC

Line in problem - sound cutting out intermittently

I've seen this question a few times, but cannot find a solution and would like my system checked out. I have a Connect, SUB, and three PLAY:5's. The system is set up to have 3 groups, and I run them connected to one another 90% of the time. I have no issues with the services or other inputs, however, my TV and streaming inputs are a hit-or-miss thing. When I last moved, I upgraded my internet signal and speed to be at 100mbps and I have connected the CONNECT with ethernet directly to the modem/router, so that shouldn't be an issue. I have line in coming from either the TV or from the cable box. In both cases, every once in a while, I get a garbled/cutting out of the sound. It recovers, but it is extremely annoying. I have to keep it on Automatic to have a decent watching experience, as if i change compression, the lip sync is terrible. I sent some diagnostics to the support team and have usage data on, so im hoping you can see that information and make an assessment. my last diagnosis send was confirmation number 4663215. I've tried using wireless with the connect, using different AV wires, plugging into PLAY:5s directly and bypassing the CONNECT, changing wireless channels (although if there's a trick to this specifically based on my new wireless system, and even using a separate receiver! ( please check the wireless signals? out) and multiple input sources. In my old place, I gave up on it. I thought I had it hooked up in a way to be able to enjoy it, and it works most of the time, but now has begun clipping and dropping all the time and I have to turn it off until I get it fixed because it is so frustrating. Please let me know if there's something im missing or if I need to sell the CONNECT and get a playbar, or whatever the best solution would be. I just want to be able to watch cable or ROKU without the sound dropping. Love these products, but this one problem is a big bear.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

69 replies

Tom B
Retired Sonos Staff
May 23, 2017 2:55 PM UTC
A channel change can often help, if there was lots of traffic on the previous one. I'm a little surprised it made a big improvement in your case but if it works, then great! Regarding the PLAYBAR; really it's just an optical connection into it. The only way to get it working with that TV would be to use some kind of converter such as HDMI to optical or RCA to optical. These are not officially supported but have often worked for many customers.
Translate
Help others find useful content by clicking the like button and selecting the best answer to your question
Lyricist II
May 23, 2017 5:31 PM UTC
Thanks Tom. Appreciate the help.
Translate
Lyricist III
Jul 30, 2017 10:11 PM UTC
@dakotalazenby - Welcome to the Community! Sorry you're having trouble with the CONNECT. It sounds like submitting a diagnostic report would be great, especially while we are passing PS4 audio through the TV.

I'd also check the audio from the headphone jack on the back of the TV while passing PS4 audio through the TV as well. We want to check the full signal flow at every possible break point.

Thanks in advance.


After a month and a half of being out of the country, I finally had the time to sit and watch a movie today. The problem I was experiencing before I left it seems I am still having. The Connect will sporadically cut out all sound. Please see the topology diagram and descriptions from previous messages for details.

I have Line in turned up to 10 as suggested in other people's comments.

I also submitted diagnostic: 7666701

I submitted it today during the movie. It seemed that the sound most frequently cut out after the movie was loud for a bit and then after reaching a quiet part the sound would die. Sometimes it would recover on its own, sometimes you had to go to the app and hit play on line in. Could it be something with the Connect device measuring input amplitude to determine whether it is playing or not and cutting off due to low amplitude input?
Translate
Contributor I
Aug 7, 2017 2:20 AM UTC
For what it's worth, I had the same issue for the longest. And my home wifi is solid. I decided to try installing the Sonos Boost just to give it a whirl and it's solved nearly all my issues. I still experience it once in a long while but for the most part it's eliminated the issue for me. It would occur daily for me before.
Translate
Lyricist III
Aug 15, 2017 5:33 PM UTC
Hi

I experience this problem also for a long time. I read the whole thread and it looks to me that for some it was a problem with wifi. But for some others it ONLY happens when using Line-IN. And some it did work a few months/years ago without any problem.

I tried all the difference solutions mentioned here and it Line-IN still doesn't work properly for me. I have everything wireless and did tests with all sonos wired. But it doesn't work here. So I expect for me it is not a wireless problem.

I find these answers interesting where sonos obviously mentioned this: "The info I got from Sonos support is that after V7 and Spotify connect, the system uses more CPU-power. "

The strange thing I have is that it sometimes does work really well and then it changes within minutes to really bad.

My Diagnostics number is: 7720133

Thank you for your help.

Beat
Translate
Lyricist III
Aug 15, 2017 7:59 PM UTC
My Diagnostics Number during the problem did happen: 7720634

thank you for your help
Translate
Lyricist III
Aug 26, 2017 2:03 AM UTC
Just looking for an update from Sonos on this. It is really annoying that the sound cuts out randomly and for varying amounts of time during movies and games. It is doubly annoying that I was out of the country for the majority of my "return period" and now I am stuck with a seemingly defective device... unless it is something with their automatic input amplitude monitoring algorithms that turn the device on automatically when it detects sound on line in, I don't know WHY it would intermittently STOP patching sound through from line in to line out...
Translate
Lyricist III
Sep 30, 2017 7:54 PM UTC
Well, here's another diagnostic... just in case the old one I posted has expired by now. Same issue, same device, now well outside my return period.

It's a good thing the other speakers work so well, because this Sonos connect issue is really getting under my skin.

Diagnostic: 7900208
Translate
Contributor I
Oct 12, 2017 8:12 PM UTC
I had a problem playing with music cutting out intermittently from the line-in. I am running a gigabit network, so I would have thought that all my cabled devices would have had plenty of bandwidth, but that was not the case. I tried changing the SonosNet channel, but that made no noticeable improvement. Compression greatly helped with the issue, but then the music lagged behind the original source connected to the input. After a fantastic call with Brae at Sonos we determined that my Netgear GS108T managed switch disables BPDU Flooding by default. We enabled that and the issue completely went away. I'm not sure how many of you out there have managed switches, but I hope this helps someone since I would have never figured this out without help from Sonos tech support.
Translate
Keith N
Sonos Staff
Oct 16, 2017 7:06 PM UTC
dakotalazenby: Thank you so much for your patience, while we get caught up here in the Community. I was able to take a look at the diagnostic from the 30th of September, and you may be hitting on something about the signal the CONNECT is receiving. Based on the diagnostic sent, I can see that the CONNECT is detecting the sound to be WAV, shortly after it detects silence and will auto-stop. This lines up with you are experiencing. If you try plugging in a different audio source (such as your mobile phone or CD player) to the CONNECT, do the issues persist? We essentially want to nail down what side of the CONNECT is having the problem.
Translate