Skip to main content
Contributor I
Jun 22, 2015 10:45 AM UTC

Line in problem - sound cutting out intermittently

I've seen this question a few times, but cannot find a solution and would like my system checked out. I have a Connect, SUB, and three PLAY:5's. The system is set up to have 3 groups, and I run them connected to one another 90% of the time. I have no issues with the services or other inputs, however, my TV and streaming inputs are a hit-or-miss thing. When I last moved, I upgraded my internet signal and speed to be at 100mbps and I have connected the CONNECT with ethernet directly to the modem/router, so that shouldn't be an issue. I have line in coming from either the TV or from the cable box. In both cases, every once in a while, I get a garbled/cutting out of the sound. It recovers, but it is extremely annoying. I have to keep it on Automatic to have a decent watching experience, as if i change compression, the lip sync is terrible. I sent some diagnostics to the support team and have usage data on, so im hoping you can see that information and make an assessment. my last diagnosis send was confirmation number 4663215. I've tried using wireless with the connect, using different AV wires, plugging into PLAY:5s directly and bypassing the CONNECT, changing wireless channels (although if there's a trick to this specifically based on my new wireless system, and even using a separate receiver! ( please check the wireless signals? out) and multiple input sources. In my old place, I gave up on it. I thought I had it hooked up in a way to be able to enjoy it, and it works most of the time, but now has begun clipping and dropping all the time and I have to turn it off until I get it fixed because it is so frustrating. Please let me know if there's something im missing or if I need to sell the CONNECT and get a playbar, or whatever the best solution would be. I just want to be able to watch cable or ROKU without the sound dropping. Love these products, but this one problem is a big bear.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

69 replies

Stuart_W
World-Class Superstar
Jul 14, 2016 8:39 AM UTC
It can't hurt to re-boot your system - Switch off the power to your router, all Sonos equipment and EVERYTHING attached to the network including phones, tablets. Then switch router back on, wait for it to connect to Wi-Fi and broadcast, then Bridge or Boost if you have them (Wait a few mins), then Sonos Speakers, then the rest of your devices.


Do NOT factory reset any of your gear unless Sonos tell you to or one of the more senior board members suggests it.

Jeff will review your last diagnostic and report back
Translate
Arc + Sub (Gen 1) + 2 x Play 1/ Stereo Play 3s/ Era 100 Stereo in Kitchen, One Stereo in Bedroom, Play 1 stereo pair in Study, Play 1in Bathroom, Sonos Move 2
Contributor I
Jul 14, 2016 8:44 AM UTC
Thanks very much, Stuart. I've restarted the system (unplugged everything) and restarted the router, but I will be sure to wait for a reply before I reset the whole system - thanks!
Translate
Jeff S
Retired Sonos Staff
Jul 14, 2016 4:19 PM UTC
Hi Jeff - thanks very much for your quick reply. I tried unplugging both ends and changing the cable as well. I waited for the audio to cut out again and quickly pressed 'submit diagnostics' and it hung and then said 'unable to submit diagnostics'. I waited for the sound to come back, and it submitted diagnostics very quickly with this reference number 6358176. I wonder if it has something to do with the controller software? Perhaps resetting the whole system would be advisable? One other speaker is refusing to join the network - I go through the process of re-adding it and at the last step it says it failed. Do you suggest anything software-side that I could do to see if it is a controller issue?

Many thanks again - Gelb


Hi Gelb,

Your system is getting hit with wireless interference. This has caused your missing Sonos unit to be unable to communicate with your router. That unit is sending and receiving information wirelessly from other Sonos units, but its connection is not strong enough to communicate with your router and receive a valid network address. This is why it doesn't show up in your controller. Please start by changing the wireless channel on your Sonos system, here's how.

Once the channel has changed your missing Sonos unit may be able to get a network address on its own. If it doesn't show up in a few minutes, try rebooting your router and then also reboot the missing Sonos unit. You can also try the other wireless channel available.

Reducing interference should also help with the audio interruptions.

Please send in a new diagnostic report if you continue to have any issues.
Translate
Help others find useful content by clicking the like button and selecting the best answer to your question.
Contributor I
Jul 14, 2016 4:46 PM UTC
Hi Jeff - I will do and will report back. I just wanted to highlight that the audio is dropping out from the input into the Play 3 while playing the audio on that play 3 - I'm not trying to play the line-in audio on another speaker.
Translate
Contributor I
Jul 15, 2016 7:52 AM UTC
Hi Jeff - i have changed channel and restarted. I'm sure I'll be able to connect the wayward speaker eventually, but my main issue is the audio is dropping out from the input into the Play 5 while playing the audio on that play 5 - I'm not trying to play the line-in audio on another speaker - it's the hard-wired connection into the play 5 that is getting interrupted on that play 5. Should I reset my whole system? I was thinking it could be tied to the update to the sonos software I was pushed a week back - I installed it just prior to this happening.
Translate
Jeff S
Retired Sonos Staff
Jul 15, 2016 4:23 PM UTC
Hi Jeff - i have changed channel and restarted. I'm sure I'll be able to connect the wayward speaker eventually, but my main issue is the audio is dropping out from the input into the Play 5 while playing the audio on that play 5 - I'm not trying to play the line-in audio on another speaker - it's the hard-wired connection into the play 5 that is getting interrupted on that play 5. Should I reset my whole system? I was thinking it could be tied to the update to the sonos software I was pushed a week back - I installed it just prior to this happening.

Hi Gelb,

Resetting your system doesn't fix anything, it just makes you have to set everything back up. Have you tried using a different audio source, such as your smartphone? Do the audio interruptions happen on all devices connected with all audio cables?
Translate
Help others find useful content by clicking the like button and selecting the best answer to your question.
Lyricist I
Sep 24, 2016 12:48 PM UTC
Hi Gelb
I have the same problem. only using line in to the play5 on my pc and after a couple of min it stops until I tell it to play again and again...

Any solution!!!
Translate
Jeff S
Retired Sonos Staff
Sep 27, 2016 2:21 PM UTC
Hi Gelb
I have the same problem. only using line in to the play5 on my pc and after a couple of min it stops until I tell it to play again and again...

Any solution!!!


Hi founride,

Please send in a diagnostic report from your system. Then, reply with the confirmation number and I'll take a look.
Translate
Help others find useful content by clicking the like button and selecting the best answer to your question.
Lyricist I
Dec 1, 2016 4:42 PM UTC
I have the same problem. It helped a lot when I changed line in level to 10. Settings > room settings > pick your connect amp > line in > pick 10. Hope this helps cause it is super annoying to watch a movie like this.

HOORAY! THIS WORKED FOR ME!!! Thank you for posting the instructions: Settings > room settings > pick your connect amp > line in > pick 10. After trying various other things, this was an IMMEDIATE FIX that worked for me for Line-In Cutting Out Intermittently. God Bless You!
Translate
Contributor I
Dec 2, 2016 3:46 PM UTC
Yep, that also worked for me! No cut outs and been listening for a while now.
Switched to SonosNet Channel #11 - In Settings, Room Settings, select the speaker for your Line-In
And
Line-In Source Level #10 - In Settings, Advanced and in General tab.

Thanks all for the help and so happy now!
Translate