Skip to main content
Contributor I
Apr 20, 2021 5:10 PM UTC
Answered

Impossible to connect my SONOS ROAM in Bluetooth

Hello,

 

as I just received my SONOS ROAM I have tried many times today to get it connected in Bluetooth by following the procedure as described in that link.

https://support.sonos.com/s/article/4989?language=fr

So I kept pressing the button at the back but the blue light never went on and as a consequence the product had been left undiscovered for my mobile phone.

Is there anyone who encountered the same issue & what should I do to get it solve.

Thanks for your help

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
shfawaz
shfawazAnswer
Prominent Collaborator I
Apr 22, 2021 9:07 PM UTC

Actually, I never got the blue pairing led to flash, always stayed white. 

 

UPDATE: Found that my system had an update available, installed that, and I finally was able to pair my iPhone. 

Thanks!

"I alway listen to my music intravenously"

114 replies

Ken_Griffiths
Jun 11, 2021 7:46 PM UTC

I have gone though this process a couple of times, and still no luck.  I have never once hear a chime or have seen a blue light.  The Roam will just oscillate between blinking white and blinking orange, unless plugged in to which a white light stays on.  No matter how long I hold the power button 2 secs to as long as I can hold it down, I have never seen my phone find Sonos or Roam on my BT pairing.

It sounds like you are in ‘diagnostic dump’ mode. Fully power off the speaker by long-pressing the rear power button until all lights switch off. (About 5-10 seconds press should be long enough). Wait 30 seconds and power on again and when the device had settled and is showing in the S2 App, then try the steps mentioned again.

Translate
Lyricist III
Jun 12, 2021 8:25 AM UTC

So the Saga continues.

all the problems I was having were experienced while I was “roaming” traveling from the UAE to the UK with a long stopover in Portugal. It seems that the SONOS “Roam” works fine as long as you are not “roaming”

As soon as I arrived at my UK address it connected to the Sonos network and then allowed me to connect via Bluetooth. I basically carried an extra useless weight in my baggage for the whole trip and could not listen to any music in my guest house without headphones.

I was amazed to read the response from Sonos that the product is sold incomplete with the software still in development. So shouldn’t we pay for 50% of the product and send you the rest when it is finally finished and actually works as advertised?

What about a bicycle manufacturer with electronic gears run by software, “Please pay for my bike, the gears will not shift but we will let you know when you might be able to change gear in future firmware updates”

So Sonos what is the fix for this? Can I ever take this product away from a Sonos system again?

Translate
Ken_Griffiths
Jun 12, 2021 3:31 PM UTC

@Aitchliddle,

I’m away from Home for the weekend (enjoying the hot weather spell here in the U.K.) and Roam is working just fine here on both a Bluetooth connection and/or connected to a MiFi 4G device with the iPhone XR as a controller. If you can’t get it to work away from its normal home network, then it’s either user error, or perhaps a faulty device, but our Roam most definitely works. 

The images attached are the Roam (called Walkabout) playing Peter Gabriel on the MiFi signal and The Weekend playing on Bluetooth (using Amazon Music) - no update needed here for the Roam software.

Both types of connection when travelling with the Roam are working fine.

Translate
Lyricist I
Jun 12, 2021 4:34 PM UTC

All,  have scoured this thread. Reset Roam to factory settings. “Forget this device” on all iPhones. Went through set up a d set up new system with just the roam on WiFi. Works. Paused via Roam. Pressed Roam button for 2 seconds. Blue light flashing. Add to iPhone Bluetooth. Blue light never stops flashing. But I can connect and play via Apple music. 
 

Problem…as soon as I get out of WiFi range I loose connection to the Roam and it quits functioning on Bluetooth. It also disappears out of apple music airplay list. 
 

what am I missing/doing wrong? 

Translate
Ken_Griffiths
Jun 12, 2021 4:55 PM UTC

All,  have scoured this thread. Reset Roam to factory settings. “Forget this device” on all iPhones. Went through set up a d set up new system with just the roam on WiFi. Works. Paused via Roam. Pressed Roam button for 2 seconds. Blue light flashing. Add to iPhone Bluetooth. Blue light never stops flashing. But I can connect and play via Apple music. 
 

Problem…as soon as I get out of WiFi range I loose connection to the Roam and it quits functioning on Bluetooth. It also disappears out of apple music airplay list. 
 

what am I missing/doing wrong? 

It sounds like it hasn’t connected to the iPhone if the blue light is still flashing - what is it’s status in the iPhone’s Bluetooth settings? Have you tried removing it from its BT pairing and deleting it on the phone and setting up the pairing again?

Translate
Lyricist I
Jun 12, 2021 5:16 PM UTC

All,  have scoured this thread. Reset Roam to factory settings. “Forget this device” on all iPhones. Went through set up a d set up new system with just the roam on WiFi. Works. Paused via Roam. Pressed Roam button for 2 seconds. Blue light flashing. Add to iPhone Bluetooth. Blue light never stops flashing. But I can connect and play via Apple music. 
 

Problem…as soon as I get out of WiFi range I loose connection to the Roam and it quits functioning on Bluetooth. It also disappears out of apple music airplay list. 
 

what am I missing/doing wrong? 

It sounds like it hasn’t connected to the iPhone if the blue light is still flashing - what is it’s status in the iPhone’s Bluetooth settings? Have you tried removing it from its BT pairing and deleting it on the phone and setting up the pairing again?

Yes deleted from BT and Re-paired.  Blue light stays blinking but it shows up in airplay and works….until I lose the WiFi network. Maybe it actually doesn’t connect via Bluetooth and just keeps playing over WiFi. As if I turn WiFi off it stops working. 
 

So I guess this means the Bluetooth connection is not actually working. iPhone can connect to other Bluetooth, like wireless headphones. iPhone 11 with 14.6 software version. 

Translate
Ken_Griffiths
Jun 12, 2021 5:40 PM UTC

Yes deleted from BT and Re-paired.  Blue light stays blinking but it shows up in airplay and works….until I lose the WiFi network. Maybe it actually doesn’t connect via Bluetooth and just keeps playing over WiFi. As if I turn WiFi off it stops working. 
 

So I guess this means the Bluetooth connection is not actually working. iPhone can connect to other Bluetooth, like wireless headphones. iPhone 11 with 14.6 software version. 

My Roam status LED doesn’t flash, but shows a constant blue light when it’s paired and the iPhone shows this (see attached). Roam is called ‘Walkabout’.

Note in the screenshot that my WiFi is not connected, but it still plays okay.

I just use the iPhone BT list as shown in the screenshot to both connect and disconnect the Roam to my iPhone.

Translate
Lyricist III
Jun 12, 2021 6:07 PM UTC

@Ken_Griffiths Good to hear your Roam is working 

mine is also working now but from all the trail of problem mails it is fairly obvious that there is a problem it should not be a complicated procedure to connect a BT speaker. 
I am concerned about taking this speaker on a trip in case the same thing happens to me again. It was not “user error” I researched and tried every possible solution none of which worked without the unit being connected to a Sonos system which was not available while traveling.

Translate
Ken_Griffiths
Jun 12, 2021 6:37 PM UTC

@Ken_Griffiths Good to hear your Roam is working 

mine is also working now but from all the trail of problem mails it is fairly obvious that there is a problem it should not be a complicated procedure to connect a BT speaker. 
I am concerned about taking this speaker on a trip in case the same thing happens to me again. It was not “user error” I researched and tried every possible solution none of which worked without the unit being connected to a Sonos system which was not available while traveling.

All Sonos products require online registration to a user-account over WiFi as part of the setup process, as per the system requirements - but it’s often possible when travelling to do that with a mobile WiFi hotspot. I did however register the Roam before travelling on this occasion.

Translate
Lyricist III
Jun 13, 2021 4:08 AM UTC

I also did all that before traveling but somehow it became disconnected and subsequently would not connect.

Do you work for Sonos?

It is working now so I will persevere and see if the problem persists.

Enjoy the sunshine Ken

Translate