Skip to main content
Contributor I
Apr 20, 2021 5:10 PM UTC
Answered

Impossible to connect my SONOS ROAM in Bluetooth

Hello,

 

as I just received my SONOS ROAM I have tried many times today to get it connected in Bluetooth by following the procedure as described in that link.

https://support.sonos.com/s/article/4989?language=fr

So I kept pressing the button at the back but the blue light never went on and as a consequence the product had been left undiscovered for my mobile phone.

Is there anyone who encountered the same issue & what should I do to get it solve.

Thanks for your help

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
shfawaz
shfawazAnswer
Prominent Collaborator I
Apr 22, 2021 9:07 PM UTC

Actually, I never got the blue pairing led to flash, always stayed white. 

 

UPDATE: Found that my system had an update available, installed that, and I finally was able to pair my iPhone. 

Thanks!

"I alway listen to my music intravenously"

114 replies

Lyricist III
Jun 1, 2021 7:19 AM UTC

I am so glad to read all these posts I was starting to think that I was losing the plot.

I am an early adopter of SONOS and hove two houses full of products, I was very frustrated with the whole update situation but have bitten the bullet and am upgrading my systems (Now having difficulty operating the old system, that's for another post).

So I did get my ROAM working on Bluetooth after setting it up in my home system, so I took it travelling with me, now it reacts in exactly the way everyone reports. I have tried everything reset new system you name it but there is no way I can get a Bluetooth blue light to come on.  Of course now I am not at my home so there is no way to connect it on that system, it really should not be this difficult to connect a Bluetooth speaker, I am regretting leaving my Bose BT speaker at home and I am very close to becoming an ex SONOS customer. 

Come on SONOS why are you not responding to your customers?

It is such a shame to watch a once innovative and forward thinking tech company become yet another victim to the almighty corporate god of the Dollar.

Anyone want to buy an unused ROAM very cheap.

Harrison

Translate
Lyricist III
Jun 1, 2021 7:29 AM UTC

Hi @patdude 

The problem is that your system is on S1, and the Roam is only compatible with S2, as mentioned on our Set up your Sonos Roam help page.

You’ll need to reset the S2 app and when reopening it select to setup a new system, not to connect to an existing one. It may also help to turn the S1 units off while setting up S2. Once setup, however, the S1 and S2 systems/apps will operate properly side-by-side (though separately).

If your Roam isn’t ready to be setup (flashing green) you’ll need to factory reset it first.

In answer to your direct questions:

  1. Units are manufactured in advance, to build up stock and we cannot update Roams while they are in boxes in a warehouse. Software development is an on-going process and doesn’t always go as smoothly as marketing plans/executives would like. Therefore, few products (of any brand) that run software are ever sold with up-to-date software installed at the factory.
  2. A Sonos system requires all units on it to be operating on the same software to operate and configure correctly. A new unit, therefore, is not allowed to be added until the app and system are operating on the same software - if they were not, many strange things could happen making you (and many others) even less satisfied with the products. In addition, S1 is vastly different from S2, despite their common look.
  3. If you’d like a refund, arrange for one - just visit https://support.sonos.com/s/money-back-guarantee or return it to the store from which it was bought (though in this case you will be subject to their refund policy, not ours).

I hope this helps.

I appreciate your getting back to me, but hey, these are really pretty lame excuses.

The reality is this - selling a Bluetooth speaker that doesn’t pair because of buggy firmware doesn’t come down to manufacturing logistics, it comes down to an abysmal testing regime. This bug should have been picked up well before the units even made it from the factory to the warehouse. 

As for your reply that "Sonos requires all units to be operating on the same software"???? That excuse might have washed back in the 1980’s but nowadays, regardless of what software is running on Sonos firmware, the gear and its network protocols should be based on agreed industry standards, and these should should work seamlessly via a remote controller app regardless of any software issues.

Putting it simply, this is why I can plug a western digital NAS into a Dlink Router and retrieve files on my Microsoft Surface PC or Mac. If it works with all those brands, why cant Sonos just get it right??? Is this really such a difficulty?

How about you just admit that Sonos went ahead with the S1/S2 debacle to push people into upgrading in order to bolster their revenues. 

I’m definitely getting a refund, but also as a reviewer I am going to actively tell my readership to avoid Sonos until this mess is sorted out or Sonos grows a conscience. Sadly I doubt either is going to happen any time soon.   

Well said sir

I completely agree with you SONOS has lost the plot and is now run by corporate crooks it seems.

 

Translate
Lyricist I
Jun 1, 2021 4:13 PM UTC

As of now, I hate the Roam.  Impossible to connect simply and easily. It’s way too frustrating and too much work to use.  

Translate
Ken_Griffiths
Jun 1, 2021 5:36 PM UTC

As of now, I hate the Roam.  Impossible to connect simply and easily. It’s way too frustrating and too much work to use.  

The Roam buttons may seem complicated at first, but those that know the workings of Sonos will likely find it quite easy after a short while of using the device.

I did this quick summary below, which may hopefully assist with understanding the main button presses. The controls certainly do get easier with time and use, I personally don’t even have to think about them for operating the speaker.

Anyhow I hope this helps…

Roam Controls Summary

 Rear Power Button:

  1. Use this button to power on the device.
  2. A quick press puts device to sleep/wakes up device
  3. A longer press (2nd bleep) puts device into Bluetooth mode (it will go into BT pairing mode, if not paired), or repeat this step for pairing mode, repeat to return to WiFi (or disconnect the pairing on mobile device).
  4. A Longer 5+seconds (3rd bleep) button press, when powered on, will power-off the Roam completely.

Play/Pause Button:

  1. A quick press will play/pause the audio.
  2. A quick double press skips to next playing track (if available).
  3. A quick triple press (either restarts playing track, or skips to previous track - depends on audio service in use).
  4. A long press (2nd bleep) will ‘group’ the Roam with a playing Sonos speaker on LAN (repeat to cycle through all playing sources).
  5. A longer press (3rd bleep) will invoke Sonos SoundSwap between Roam and a nearby ‘compatible’ Sonos Speaker (WiFi only). See this feature LINK

There are other combination button options for device-reset and diagnostics etc. but they are rarely necessary, so I haven’t included those.

Translate
Lyricist III
Jun 1, 2021 7:27 PM UTC

Lovely 

sounds great

but

it DOES NOT WORK

i have tried and tried and tried. And followed all of the above nine of which works

Translate
Lyricist I
Jun 1, 2021 7:29 PM UTC

I have a Bose.  I turn it on. It connects. Every time. Period. Do better Sonos. The volume of issues and frustrations here clearly point out the flaws with this product. 

Translate
Lyricist III
Jun 1, 2021 7:37 PM UTC

#jdgrand 

100% agree

Translate
Lyricist III
Jun 1, 2021 7:38 PM UTC

AL1 None, not nine  

Translate
melvimbe
Jun 1, 2021 8:27 PM UTC

As for your reply that "Sonos requires all units to be operating on the same software"???? That excuse might have washed back in the 1980’s but nowadays, regardless of what software is running on Sonos firmware, the gear and its network protocols should be based on agreed industry standards, and these should should work seamlessly via a remote controller app regardless of any software issues.

 

 

There isn’t any industry standards for wireless mutiroom audio.  Each brand runs their own system (often stealing tech from Sonos) with their own protocols and such.  There is bluetooth and airplay, but they have limitations that Sonos does not.    As well, it’s not at all uncommon for modern devices to require a firmware update after sitting in a warehouse for awhile.  Some devices may not push it right away, because they are stand alone devices.  Sonos is different in the sense that your existing devices are likely already on a version higher than your new device, and thus it needs to catch up.

 

Putting it simply, this is why I can plug a western digital NAS into a Dlink Router and retrieve files on my Microsoft Surface PC or Mac. If it works with all those brands, why cant Sonos just get it right??? Is this really such a difficulty?

 

 

Like I said, you’re assuming their on industry standards for all of this that simply don’t exist.  Yes, Sonos, and other systems do use some industry standards, but they have specific protocols that they use, possibly have patents for.  

 

How about you just admit that Sonos went ahead with the S1/S2 debacle to push people into upgrading in order to bolster their revenues. 

I’m definitely getting a refund, but also as a reviewer I am going to actively tell my readership to avoid Sonos until this mess is sorted out or Sonos grows a conscience. Sadly I doubt either is going to happen any time soon.   

 

You would have a point if your assumption about multiroom audio following an industry standard was accurate.

Translate
Danny
Lyricist II
Jun 11, 2021 7:22 PM UTC

I do, but the only chime I hear is the one that you can hear when the ROAM is turning off.

Perhaps see if the following steps helps to sort it for you.

  1. Play some music to the Roam via the Sonos App, this is just to ensure it’s currently connected via WiFi. Pause the music playback with its Play/Pause button.
  2. Next check your mobile Bluetooth device-list that you plan to connect to. If the Roam is in the list already, then remove that device, just in case it is the old connection that was in use before you factory-reset the speaker.
  3. Now press and hold the rear power button on the Roam for two seconds and let go.
  4. Check the Roam then appears in your mobile Bluetooth device-list and select it in order to pair the speaker to the mobile.
  5. All being well, you should now be able to play audio to the Roam via the Bluetooth-connected mobile.

I have gone though this process a couple of times, and still no luck.  I have never once hear a chime or have seen a blue light.  The Roam will just oscillate between blinking white and blinking orange, unless plugged in to which a white light stays on.  No matter how long I hold the power button 2 secs to as long as I can hold it down, I have never seen my phone find Sonos or Roam on my BT pairing.

Translate