Skip to main content
Contributor I
Feb 14, 2020 11:32 PM UTC

Do Not Buy Another Sonos

I just got off the phone with tech support - my Sonos cube cant “connect”with the app on my phone.I haven't used the device in a month. After going through the usual antiquated prompts I was told that unless I plug in an ethernet cable from the modem/router to the Sonos cube It cannot be fixed - WHO HAS AN ETHERNET CABLE LYING AROUND in 2020? All I can say is that its Valentines Day and I have no music. Pathetic. I’m shorting SONO stock on Monday. 

    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    49 replies

    jgatie
    Feb 15, 2020 12:51 AM UTC

    What do you mean by Sonos cube?  Sonos makes nothing called a ‘cube’.

    Translate
    Ken_Griffiths
    Feb 15, 2020 12:59 AM UTC

    bbc8,

    Hmmm… a Sonos legacy product, I presume? (Maybe the 'cube' was a little bit before my time) ...but I do literally have dozens of Ethernet cables knocking about here in cupboards and drawers, I seem to think a fair few of them came packaged with each of my Sonos devices. 

    I assume you have never heard of 'wired' SonosNet mode too?

     

     

    Translate
    Feb 15, 2020 8:00 AM UTC

    I would certainly urge people not to buy a Sonos Cube.

    Translate
    bbc8Author
    Contributor I
    Feb 15, 2020 10:12 AM UTC

    Its a 3 year old Sonos 1 - To me it looks like a cube. The whole point of using Sonos is that its wireless. I have excellent normal internet so it should work when I want to use it - instead of,every time,having to go through a 20 minute process, pressing buttons etc with no outcome. Cmon now - its an obsolete product - especially if needs to be hardwired to work.

     

    Translate
    Prodigy II
    Feb 15, 2020 10:32 AM UTC

    Using an ethernet lead, if only temporarily, will create sonosnet, which is sonos’s long time mesh network which will separate it from everything else using your standard wifi. This might make it alot more stable for you. You can always remove the lead later.

    If you get a new router, you will need an ethernet lead then to set sonos up again. Ebay pack of 10 patch leads dead cheap,

    Translate
    Feb 15, 2020 10:38 AM UTC

    I have been using Sonos speakers wirelessly for 9 years without a hitch. I don't know what circumstances led to your being given the advice you were given, but the need to wire is usually only temporary. If you give us more information about your setup and problems there is every chance we can help.

    Translate
    Ken_Griffiths
    Feb 15, 2020 12:17 PM UTC

    bbc8,

    I see your profile mentions a Sonos PlayBar only, so do you have several Sonos products ..??

    Like John B, I have lots of Sonos products about my home and they run without a problem. I choose to run my devices on SonosNet and so separate that internal wireless channel out from my routers 2.4ghz WiFi signal, which I then use for other non-Sonos devices, although where possible, I place my 'other’ networked devices on the routers 5ghz band. I have therefore also removed the WiFi credentials stored for Sonos use (network/wireless setup), so as to prevent a 'mixed mode' situation.

    I have reserved the IP addresses too in the local DHCP Reservation Table to provide added stability, but this is optional for many folk.

    I can’t recall the last problem I had with my Sonos system, but whenever that was, it was certainly before I listened to the advice of the more experienced users here in this community and took onboard their 'easy to follow' suggestions.

    Translate
    bbc8Author
    Contributor I
    Feb 15, 2020 12:33 PM UTC

    I have 3 Play 1s  and a Soundbar - Luckily I haven't bought anymore. The idea that I have to find an ethernet cable - cant remember when I last saw one, then after waiting for Sonos Support to pick up, then unplug the Play 1, take it to the Router/Modem, plug in the enet cable in order to get it working everytime I want to use it is RIDICULOUS. Cmon Guys - it should be simpler than that. Ken/John: I appreciate your defense of Sonos but its of no help. Sonos is a Public company and if this is how their products work ! The stock,symbol SONO, is DOWN 35% the past 2 years while other Tec companies are at all-time highs. That says something.

    Translate
    bbc8Author
    Contributor I
    Feb 15, 2020 1:00 PM UTC

    Using an ethernet lead, if only temporarily, will create sonosnet, which is sonos’s long time mesh network which will separate it from everything else using your standard wifi. This might make it alot more stable for you. You can always remove the lead later.

    If you get a new router, you will need an ethernet lead then to set sonos up again. Ebay pack of 10 patch leads dead cheap,

    I did the setup when I first used the units. No wifi changes at any of the locations. I understand the ethernet lead is temporary but too clumsy a fix. Its too unreliable  - Imagine if I was having a party ,how sure/comfortable should I be that we will have any music using Sonos. 

     

    Translate
    Ken_Griffiths
    Feb 15, 2020 1:24 PM UTC

    If you can’t/won’t take the advice of users here bbc8, then there is not much anyone else can do. Here is what I would personally suggest…

    • Just get the cable and try running your system on SonosNet, with just one Sonos device (Play:1) wired to the main router. 
    • Set your SonosNet channel so that it is at least 5 channels away from your routers 2.4ghz channel to prevent overlap. Always fix the channels, rather than allowing the router to auto-select them on startup and avoid channels in use by your neighbours..
    • Ensure your WiFi credentials are NOT stored in the Sonos App “Settings/System/Network/Wireless Setup” (They are not required when running a system on SonosNet).
    • Add all your Sonos IP addresses to your routers DHCP Reservation Table. This is optional, but highly recommended.
    • Make sure that your Sonos devices are at least 3 feet away from any other wireless devices, including the main router.
    • Where practicable, connect any other non-Sonos devices to the 5ghz Wifi band. 
    • Switch off any guest WiFi radios when they are not in use/required.
    • If using WiFi access points, or repeaters, with the same SSID as the main router, then ensure they operate on the same 'fixed' WiFi channels as the main router.

    This Sonos Support document is also worth keeping in mind... 

    Hope those few ‘easy to follow suggestions' assist and prove to be useful. If it works for you, then perhaps buy a Boost and put it in the place of the wired Play:1 if you find you are not able to leave the one device wired.

    The alternative to these suggestions, is to leave all devices on your routers WiFi and simply try different 'fixed’ non-overlapping 2.4ghz WiFi channels, whilst also heeding the advice in the linked support document above, but personally speaking, I think you will be far better off switching to SonosNet and use its mesh connectivity method.

    Translate